jwLabs A3 Manual

PURVEYORS OF FINE FREQUENCY
INSTRUMENTS SINCE 1987
MODEL AMODEL A
INSTRUCTION MANUALS

1
Wright Laboratories, LLC
You have made a sound decision! You have acquired a device that is the
instrument of choice for people who understand the value of applying
microcurrent to the body. Our instruments transform audio frequencies
to electrical output which produces a tingling sensation at the place of
contact. This electrical stimulation can be acquired from our specially
tuned sessions or from your favorite music. Explore the sensations of our
Tactio®feature which makes music a whole body experience!
JWLABS Machines are media adapters that act as transducers, which
convert audio frequencies, including music, to electrical impulses the
user feels as gentle vibrations or a tingling sensation.
Our instruments are not FDA certied medical devices. We oer them
only for general well being and entertainment purposes.
Once you experience our Rife technology you will appreciate why our
customers use our machines routinely to improve, preserve and protect
their well being.
Frequency matters… Change Your Tune!
WELCOME TO THE GLOBAL COMMUNITY
OF JWLABS MODEL A USERS!

2
Wright Laboratories, LLC
TABLE OF CONTENTS
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Welcome to the Model A . . . . . . . . . . . . . . . . . . . . . . 7
Take an Inventory . . . . . . . . . . . . . . . . . . . . . . . . 8
Your Model A . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Outside Features . . . . . . . . . . . . . . . . . . . . . . . . . 9
General Background . . . . . . . . . . . . . . . . . . . . . . 9
The Basics of JWLABS Rife Therapy . . . . . . . . . . . . 10
Basic Instructions . . . . . . . . . . . . . . . . . . . . .11
Preparing For your Session . . . . . . . . . . . . . . . 13
Outline of General Alignment (GA) Session . . . . . . 14
What Is Tactio®. . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 16
Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Model A3.3/A4.0 Operating Instruction . . . . . . . . . . . . .19
Getting to Know Your Model A3.3/A4.0 . . . . . . . . . . . 20

3
Wright Laboratories, LLC
TABLE OF CONTENTS
Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . 20
Charging the Battery . . . . . . . . . . . . . . . . . . . . 20
Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Headphone (TACTIO®) Jack . . . . . . . . . . . . . . . . .21
Electrode Ports . . . . . . . . . . . . . . . . . . . . . . . . 21
Activity Light . . . . . . . . . . . . . . . . . . . . . . . . .22
Polarity Switch . . . . . . . . . . . . . . . . . . . . . . . . 22
Amplitude Dial . . . . . . . . . . . . . . . . . . . . . . . .22
Model A4.0 (Touchscreen) Operating Instructions . . . . . . 23
Getting to Know Your Model A4 Touchscreen . . . . . . . .24
Display Screen . . . . . . . . . . . . . . . . . . . . . . . . 24
Welcome Screen . . . . . . . . . . . . . . . . . . . . . . . 25
Selecting Your Session . . . . . . . . . . . . . . . . . . . .25
Individual Menu Screen . . . . . . . . . . . . . . . . . 25
Session Screen . . . . . . . . . . . . . . . . . . . . . . . 25
General Alignment Session . . . . . . . . . . . . . . . 26
Model A4.0 Session Titles . . . . . . . . . . . . . . . . . . . . . 26

4
Wright Laboratories, LLC
WARNINGS
Check with your physician before beginning use of the device.
DO NOT use this device if you have a pacemaker and/or debril-
lator or other sensor, monitor or electronic device.
DO NOT use the device on children under 18 years old and do NOT
allow children to use the device without adult supervision.
DO NOT use the device near water.
DO NOT plug electrode wires into an electrical outlet.
DO NOT place electrodes in places on the body other than the
palms of the hands and/or soles of the feet because it may cause
skin irritation, injury or burns.
DO NOT apply electrodes over the heart or above the neck because
it could cause serious injury.
DO NOT engage in any use of the device which is not expressly
stated in our material. If the user engages in using the device for
anything other than entertainment, the user accepts full responsi-
bility for the consequences such as serious physical injury.
If the user feels any sensation of pain, burning, skin irritation, or
shock stop using the device immediately and turn it o. Seek medi-
cal advice if necessary.

5
Wright Laboratories, LLC
CAUTIONS
Read all instructions carefully before beginning use.
Turn the amplitude dial all the way down
(counter clockwise) at the end of each music
selection, ensuring that you begin each new
track with the amplitude minimized. In this
position, you can make adjustments to your
connections, to your track selection, or turn
your device on or o.
We recommend limiting the use of the device to an hour. 60 minutes
is the recommended maximum duration of a session. Usage beyond
60 minutes a session could result in temporary feelings of fatigue or
headache. If headache or fatigue persists for more than two hours,
consult with your physician.
Check the device before each use to make sure all components are
intact and that no wires are frayed. Do NOT use device if wires are
frayed or damaged. Doing so may result in a shock, or no output at all.
When using the machine with two people at a time, be sure the
person who feels the current rst is in charge of the amplitude
setting.
JWLABS devices are Media Adapters intended for General
Wellness and Entertainment purposes only. They are not
FDA-certied medical devices.

6
Wright Laboratories, LLC
MAINTENANCE
Clean your device with a soft cloth. Do NOT apply cleaning agents
to the instrument.
Store your device with the case closed to protect the inner
components.
Check your electrode pins for carbon build up before each use. The
carbon build up could interfere with the conductivity and could
cause no output or intermittent output, which the user may experi-
ence as a shocking sensation. A ne emery board or sandpaper will
prevent residue accumulation on the electrode pins.
DO NOT let the battery drain below 50% or the device may not
work properly.
JWLABS devices are Media Adapters intended for
General Wellness and Entertainment purposes only.
These are not FDA certied medical devices.

7
Wright Laboratories, LLC
MODEL AMODEL A
WELCOME TO THE

8
Wright Laboratories, LLC
TAKE AN INVENTORY
First, take a moment to inventory what you have received. Compare the
contents with the packing slip to verify that your shipment is complete.
If anything is missing or appears damaged, contact us immediately. Save
all packing materials.
YOUR MODEL A
Your Model A Start Up Kit Consists of the Following:
1. Two sets of Electrode Wires:
(1) 6-ft set and (1) 10-ft set
2. USB Cable and Charging
Cube
3. (4) White Adhesive Electrode
Patches (“Softies”)
4. Input Cable
5. Quick Start Guide
6. General Alignment CD
(For A3 users only)
1
2
3
4
5
6

9
Wright Laboratories, LLC
OUTSIDE FEATURES
Your Model A is approximately 4” x 6” x 2” and weighs around one
pound. The Model A is built into an extremely durable, crush-proof,
water-resistant enclosure. Just below the clasp is a little burp valve that
automatically releases the air pressure inside so you can close the case.
When closed, your Model A is very secure.
GENERAL BACKGROUND
JWLABS has been producing products since 1987 which are based
on the long history of Rife technology. Originally built by hand in
our workshop, our devices have long been assembled in state-of-the-
art factories in the US. We have stayed true to our commitment to
the original analog signal (Audiophiles appreciate the signicance
of this, in that the output is more natural, full bodied than those
created digitally. This means that with each frequency we deliver, the
harmonics around that number are produced.) Our instruments are
designed to provide the ability to play frequencies from an outside
source, including music. This feature delivers a thrilling experience
of tactile music, and provides entertainment value which is unique to
our devices. We call this feature Tactio. You may also play specically
tuned frequencies from an outside source through your Model A.

10
Wright Laboratories, LLC
The Basics of JWLABS Rife Technology
Our basic strategy has always been to provide expert frequency
tuning throughout the lower end of the audio range. Though many
have referenced targeted frequencies for specific health conditions,
we do not make or imply such claims. Each of JWLABS frequency
sessions provides concentration on certain key numbers, accompa-
nied by sophisticated tuning techniques such as sweeping (both
upward and downward) and dithering. These techniques, coupled
with the original analog source of our sessions, provide a carefully
composed and expertly tuned experience of electro-stimulation.
Our devices are intended to appeal to people who are not interested in
learning the intricate details of Rife technology, but prefer a research based
user-friendly format which is designed to enhance their General Wellness.
Our recorded sessions are a form of music. They are hand-tuned and
played with skill, much like any musical instrument is played while
music is recorded. The needs and preferences of the user are anticipated
in the contents of each recording, or score. Satisfaction of your experience
can be realized with little or no education required.
We’ve prepared numerous sessions for you to explore, and you may also
relish the Tactio®experience which involves playing your favorite music
through your machine rather than utilizing our specialized sessions.
This allows you to feel the frequencies of your music — a unique and
multidimensional experience. You are in for a treat!
All of our sessions are created on JWLABS Model B27, our analog instru-
ment, and are recorded by channels A, B, C and D. The energy our
machines use is a volts/amps electrical current, balanced in a way that
feels good to the user. With our specialized tuning, you will have the
condence and freedom to explore numerous variations in your sessions,
including emphasis on certain frequencies (and ranges of frequencies).

11
Wright Laboratories, LLC
Some people prefer to feel the energy on their palms, others choose to
apply the electrodes to the soles of their feet. Each approach will produce
a variation in sensation.
With the exception of the General Alignment recording, the frequency
range for each channel used from the Model B always corresponds to the
four tracks of each session title as follows:
• A = Track 1, delivering 3 to 33 Hz
• B = Track 2, delivering 33 to 333 Hz
• C = Track 3, delivering 333 to 3333 Hz
• D = Track 4, delivering 3300 to 10k Hz
Each title is masterfully tuned throughout these ranges with specic sets
of exact traditional frequencies, which have been known to be helpful for
thousands of users. Our tuning is both general and specic in emphasis,
ensuring that you have a comprehensive session.
Basic Instructions
We recommend that you begin your exploration conservatively, say with
a ten - fteen minute session. (This is true even for folks who have used
other Rife machines.) Allow your body to get used to the experience before
gradually building up your time to about an hour.
Our General Alignment Rife session is where everyone begins.
It’s ideal for beginners AND for folks re-starting on their machine after a
lengthy furlough. This session is also excellent for routine maintenance.
The healthy person will be able to move consistently through the tracks
of the General Alignment (GA) session smoothly.
JWLABS
Model B

12
Wright Laboratories, LLC
Our Rife sessions are divided into tracks. The lower tracks deliver the
lower frequencies, moving higher as we go up in tracks, the highest being
the last track of a given session. You will note a dierent sensation on
each track at the place of contact (usually palms and/or soles of feet).
Most users will begin with Track 2 for not more than 10 minutes per day,
ve days in a row, taking two days o each week. (In certain circumstances,
the user will begin with Track 5 (please call us for more information). This is a
ve minute track.
Start each track before increasing Amplitude. This will avoid any sensa-
tion of a sudden burst of output.
Begin as follows
wTrack 2 (10 minute track)
wAfter completing this Rife session for 3-5 days, introduce ten minutes
of Track 3 — After a couple days here, bring in ALL of track 3.
wAfter 3-5 days of tracks 2 and 3, add Track 4 for ten minutes. When you
have completed 3 to 5 days of this, bring in ALL of Track 4 and Track 5.
wWhen you have completed 2-5, you may circle back to Track 1 — We’re
sometimes as low as 3hz on the beginning of any Track 1.
wYou will now use the entire session, tracks 1 through 5. Tracks 1
through 5 comprise the entire General Alignment session, totaling
about 73 minutes.
wYou will note that the frequencies on the lower tracks are quite slow.
They have a more pronounced “beat” and you will prefer to have the
amplitude lower than on the other tracks. This is perfectly normal. The
nal track of any recording, on the other hand, is composed of much
higher frequencies which require more power. You will notice a desire
to intensify the amplitude accordingly.

13
Wright Laboratories, LLC
wSet the amplitude to your comfort level. Feel free to adjust it at any time,
given the range of frequencies you are using. You may wish to make
adjustments to the amplitude, especially when you are using Music as
the source of your frequencies. Each instrument has a dierent “voice”
and each type of music has a dierent rhythm. The nature of your music
selection may prompt you to adjust the amplitude higher or lower as you
progress through each musical selection. This is normal.
Preparing for Your Session
CAUTION: Make sure your Model A is powered o and the ampli-
tude is in the power down position before beginning these steps.
BEGINNERS will use only the General Alignment (GA) session.
1. Ensure that the polarity switch is in the positive position. (This indi-
cates that your red tipped electrode wire is positive.)
2. Separate the red and white ends of your electrode wires to about 12
inches. Insert the pins on the ends of the wires into the port on the
electrode patches. Place the electrode patch with the red lead wire
(indicating positive) onto your right palm and the electrode patch
with the white lead wire (indicating negative) onto your left palm.
3. Power on your Model A unit. Press the home screen to bring up the
main menu. Select GA Tracks (General Alignment, located in the lower
right corner), then select TRACK 2.
4. With the amplitude turned down and the electrode patches in place
on your palms, press PLAY to begin your session. (We recommend
beginning with TRACK 2 because TRACK 1 is more intense.)
5. Turn the AMPLITUDE clockwise to a level that is COMFORTABLY
STRONG, but not more than four to ve turns. This guidance

14
Wright Laboratories, LLC
generally applies to the lower tracks of any of the recordings. It’s
normal to tolerate more amplitude on the higher tracks. Turn the
AMPLITUDE all the way down if you pause during a session as well
as between the tracks of your session.
6. At the end of your session, turn the AMPLITUDE all the way down
(counter clockwise). Turn the machine o.
7. Remove electrode patches from your palms and place them back
onto the plastic shield provided. This will protect the patches and
help them last longer. Remove all replaceable wires from your unit
and close the case.
8. If you would like to use the Tactio®
feature, insert one end of the Input
Cable into the jack marked “Input”
and the other end of the Input cable
into the headphone jack of your
media source.
Outline of General Alignment (GA) Session
Track 1 - Delivers 2 - 33hz (23 minute sweep)
These frequencies are very slow. Some are slower than our brain waves
in the waking state. For this reason, people sometimes feel calmed when
using this track. We recommend that users add this track to their routine
only after they have progressed through tracks 2-5.
Track 2 - Delivers 33 - 404hz (10 minute sweep)
These frequencies remain in the lower end of the range which we address.
This is where beginners initiate their exploration.
Track 3 - Delivers 383hz - 700hz (17 minute sweep)
These mid-range frequencies will have a noticeably dierent feel from
the ones in the lower range.

15
Wright Laboratories, LLC
WHAT IS TACTIO®?
John Wright conceived Tactio
®
very early in his career of developing Rife
machines. He understood that the safest range of frequencies is in the
audio range, and he designed his early instruments with an audio jack,
making it possible to record the hand tuned frequency sessions in real
time. He knew that the potential for tactile music was promising.
Do you love music? This will take your enjoyment to a whole new level.
The thrill of listening to your favorite music and feeling the electron
ow that these selections produce is second to none. Our devices have
gone through many renditions, and we’re proud to oer this safe and
exhilarating experience to our customers.
What you will need:
• Input cable (provided in your startup kit.)
• Headset (wired) with a volume control
• Music source with a headphone jack (CD player, computer, tablet,
iPhone or smartphone)
• Model A4
Simply plug your input cable into the device you’re using to play your
music. Attach your headset to the Tactio®jack and set up your electrodes
for a regular Rife session. Be prepared to adjust the amplitude as the
Track 4 - Delivers 900 - 4,000hz (20 minute sweep)
This higher mid-range of frequencies may prompt you to desire more ampli-
tude. It’s okay to turn the amplitude up to a level that’s “comfortably strong”.
Track 5 - Delivers 3300 - 5,000hz (5 minute sweep)
These higher frequencies will feel much more subtle.

16
Wright Laboratories, LLC
TROUBLESHOOTING
Make sure the pins on the electrode wires are clean.
They may become darkened from multiple uses in
the electrode patch. A ne emery board will clean
carbon build-up or discoloration. This build-up
may interfere with a proper connection.
With continued use, the adhesive on
the patches degrades and may inter-
fere with the quality of your contact.
REPLACE THE PATCHES WITH NEW
ONES.
With continued use, the pins on the ends
of the electrode wires may become black-
ened from carbon build-up from the
patches. USE A FINE EMERY BOARD
OR SANDPAPER TO CLEAN PINS.
Typically, our users are placing elec-
trodes on the palms or the soles of the
feet. The skin at these locations is more
robust than other delicate areas. Some
people are more sensitive than others,
so we suggest that you REPOSITION
THE PATCHES EVERY TEN MINUTES
OR SO. (Pause the recorded sessions and
turn the amplitude all the way down before
doing this.)
Problem: Irritation of skin at site of electrode placement.
music intensies or becomes more subdued. The display on your Model
A4 will say “Tactio®mode” when you are streaming music or any other
audio signal through your machine.
Tactio®will bring you hours of entertainment and will provide an entirely
new way for you to introduce your friends and family to Rife technology.
It’s fun, it’s energizing. Put a new level of vibrancy in your life!

17
Wright Laboratories, LLC
Problem: No green activity light
In the A4, a failed activity light indicates
that the upper section of the device
is not communicating with the lower
section. It’s likely that the ribbon cable
has become detached, and the machine
will have to be repaired at the factory.
For the A3, be sure that the volume
of your media player is at maximum.
Computers, phones and other media
devices have several places for volume
adjustment.
Problem: Not feeling current/No output.
First, make sure your activity light is
illuminated to bright green. If not, be
sure that the volume of your media
player is at maximum. If it is, check
your connection at the electrode jack.
Check that the connections of electrode
wires are rmly in place.
If you can’t feel the current on a higher
frequency, try turning up the ampli-
tude. It’s normal to require more power
on the higher frequencies, which are
on the higher tracks. Some people will
not feel it at this level, others do. Both
are normal.
Check the pins on ends of the wires,
and make sure they aren’t darkened
from use. If they are, you can easily
clean them using an emery board or
ne sandpaper.
Test your other set of wires. The tiny
copper wires inside the cable may be
broken. If so, it’s time to order a replace-
ment set.
Another possibility is that there is a
break in one or more of the very ne
wires that compose the electrode
wires. In this case, they will have to be
replaced.
TROUBLESHOOTING
SUPPLIES
In the course of using your Wright Laboratories frequency instrument,
you will need to re-order supplies from time to time. Please go to https://
jwlabs.com for a complete list of supplies.

18
Wright Laboratories, LLC
NOTES

19
Wright Laboratories, LLC
19
Operating Instructions
MODEL A3.3MODEL A3.3
MODEL A4.0MODEL A4.0
OPERATING INSTRUCTIONS