K-9 Lights Bulldog User manual

K-9 Lights
www.k9lights.com
1
USER MANUAL
K-9 Lights BULLDOG
LED PAR64
RGBW

K-9 Lights
www.k9lights.com
2
K-9 Lights—Professional Stage Lighting




Introduction................................................................................................................... 3
SafetyInstruction ............................................................................................................ 3
FixtureDiagram ............................................................................................................... 4
Features........................................................................................................................... 4
DMXControl .................................................................................................................... 5
Display ............................................................................................................................. 7
Menu ............................................................................................................................... 8
ConnectingFixtures....................................................................................................... 10
OptionalAccessories ..................................................................................................... 11
Technicalspecification………………………………………………………………………….…………………12
Please read over this manual before operating the light
Index

www.k9lights.com
3
Introduction
Thank you for purchasing the K-9 Bulldog LED PAR64 fixture. Please read these
instructions carefully before using or operating
the fixture to avoid any possible damage or
accidents.
Product Introduction
The K-9 Bulldog is an LED PAR 64 fixture with an aluminum shell . The Bulldog uses
high power 8W
RGBW 4-in-1 LED’s . Each color can be independently controlled including
dimmer, strobe, gradual change and fading. The fixture also includes slave functionality and
DMX addressing.
Packing list
LED PAR 64 fixture
5’ Data cable
User manual
Safety Information
No user serviceable parts inside. Speak with a skilled professional before attempting
any repair.
Disconnect from the power source before setting up or moving.
Avoid direct eye exposure to the fixture when it is on.
Make sure the power supply voltage is consistent with this light, rated at 110v/60hz
 This light is designed for indoor use. W orking temperature should be lower than
100°F.
The fixtures may be mounted in any position provided there is adequate room for
ventilation. Make sure there are no flammable or explosive items with 2 feet of fixture.
Grounding is important for proper fixture operation.
If your Bulldog is in a continuous use environment with atmospheric particulates like
fog, smoke or dirt, be sure to inspect and clean the fan with compressed air as
necessary.

www.k9lights.com
4
Fixture Diagram
Bulldog LED PAR 64
Features
 High quality LED: low power consumption, bright 8 watt LEDs, even field, and long life
Fully dimmable 0 – 100%
Adjustable strobe rate
DMX controlled, addressable from the LED display
Auto run / sound activated / master slave / interconnected multi control

www.k9lights.com
5
Uses switching power supply to protect LEDs
Lens degree: 25º or 45º
DMX512 – Channel Modes – 3, 4, 5, or 8
Body color: black (white optional)
DMX Control
8 Channel Mode
Channel DMX Value Control
Function Remarks Priority
10-255 INTENSITY Must use this channel to
control dimming
0 to 100%
1
20-255 RED 0 to 100% 2
30-255 GREEN 0 to 100% 2
40-255 BLUE 0 to 100% 2
50-255 WHITE 0 to 100% 2
0-14 none6
15-255 freq STROBE Various strobe effects 3
0-31 None
32-63 MACRO Dark to bright
64-95 MACRO Bright to dark
96-127 MACRO Dark to bright to dark
128-159 MACRO RGB color roll
Must also use
channel 1 plus
colors on
channels 2-5 for
these effects.
160-191 MACRO Dark to bright to dark auto
sequence
192-223 MACRO Four color flash
Control speed
with CH 8
7
224-255 AUDIO Multi-color jump Sound activated
80-255 MACRO
SPEED
Works with channel 7
0 = slow, 100% = fast
4
5 Channel Mode

www.k9lights.com
6
Channel DMX Value Control
Function Remarks Priority
10-255 INTENSITY Must use this channel to
control dimming
0 to 100%
1
20-255 RED 0 to 100% 2
30-255 GREEN 0 to 100% 2
40-255 BLUE 0 to 100% 2
50-255 WHITE 0 to 100% 2
4 Channel Mode
Channel DMX Value Control
Function Remarks Priority
10-255 RED 0 to 100% 1
20-255 GREEN 0 to 100% 1
30-255 BLUE 0 to 100% 1
40-255 WHITE 0 to 100% 1
3 Channel Mode
Channel DMX Value Control
Function Remarks Priority
10-255 HUE Selects primary light color.
Orange = 0%,
Red = 100%
2
20-255 SATURATION Adjusts shade of color deep
to light
3
30-255 INTENSITY Adjusts Intensity of light
output.
1
Display
DMXIN DMXOUT

www.k9lights.com
7
DMX IN/OUT
LED display
4 buttons
MENU : access the menu or return to a previous menu option
ENTER: select the current menu option
UP: menu selection or parameter increments
DOWN: menu selection or parameters decrease

www.k9lights.com
8
Menu
MENU is used to access the menu or return to a previous menu option. It can not be used to
select and store the current menu option. Press UP / DOWN to choose a desired menu item.

Addr
A001‐A512DMXMode



SLAVSL.AV Slavereceiving
mode


CHNd3.4.5.8DMXreceiving
channelchoosing


SP‐‐ SP‐SP15 Built‐inprogram
speed


Pr‐‐ Pr00‐Pr15Built‐inprogram



ASC

AS00‐AS15ColorJumping

MENU

FADEFA00‐FA15GradualChanging
mode


FLASFL00‐FL15Whitestrobe
mode


RLr000‐r255Reddimming


gLg000‐g255Greendimming


bLb000‐b255Bluedimming



UL
w000‐w255

Whitedimming

www.k9lights.com
9
Press ENTER to access further menu settings or press enter to save the current setting.
For example, if you want to choose DMX mode A001, select as follows:
Press MENU, go back to the initial setting
Press UP / DOWN until “Addr” appears
Press ENTER to select (the display will flash)
Press UP / DOWN to change the address code to select A001

Press ENTER to select and store the current menu options. DMX mode will
be stored
automatically and the screen will stop flashing.

3. Details of fixture presetsPr- -
Press MENU, go back to the initial setting
Press UP / DOWN until “Pr--“ appears
Press ENTER to choose, the display will flash
Press UP / DOWN to change the program code to select pr00

Press ENTER to select and store the current menu options. DMX mode
will be stored
automatically and the screen will stop flashing.
Program Options:
Pr00:red; Pr01:green Pr02:blue Pr03:amber
Pr04:cyan Pr05:purple Pr06:white; Pr07:red+strobe;
Pr08:green+strobe Pr09:blue+strobe; Pr10:amber+strobe; Pr11:cyan+strobe
Pr12:purple+strobe; Pr13:white+strobe;
Pr14:RGB jumping change; Pr15: 7 colors continuously changing;
NotePr7--- Pr15 Changes the content Of SPadjust the speed of continuous color
changes. SP00 is the fastestSP15 is the slowest
Master/Slave

www.k9lights.com
10
Multiple fixtures can be operated simultaneously without a control board by connecting each
fixture with DMX control cable and using one fixture as “Master” and the others as “Slave”.
The “Master” fixture will then synchronize with the “Slave” units.
To use this feature, make sure there is nothing plugged into the “DMX IN” on the fixture
“Master”. Daisy-chain from the “Master” “DMX OUT” to the “Slave” fixtures. Set the DMX
address on every “Slave” unit to A001. Only one light within a group can serve as “Master”.
If the length of DMX data cables extend more than 180’ or there are more than 20 fixtures
being used as “Slaves”, the DMX signal will need to be boosted.
Connecting Fixtures
XRL cable
Using 3-Pin XLR data cable, connect the male end to your console, and the female end to
the “DMX IN” connector on your fixture. Using additional data cable, you can connect a
string of fixtures by feeding from “DMX OUT” on one fixture to “DMX IN” on each additional
fixture in the chain.
DMX signal must “daisy-chain”. The use of a “Y” adapter to split the signal will cause the
fixtures to function incorrectly.
If the DMX 512 output on your control board has a 5-pin DMX connector, you will need a
“5-pin male to 3-pin female DMX adapter” between your console and the first fixture.

www.k9lights.com
11
Optional Accessories
Item Part#
5 Pin to 3 Pin Data Cable Adapter WIR 5PM3PF
C-Clamp ACCCC
Safety Cable HRD SAFE
3 Pin Data Cables (10’) WIR 3010

www.k9lights.com
12
Technical Specification
●Input voltage115V 60Hz
●Output voltageDC24V
●Power Consumption148W
●Lamp TypeHigh Power 8W LED
●Lamp Spec RGBW 4-in-1
LED 8W18PCS
●Constant current: 500mA
●Refresh Frequency: 400HZ
●Life span: 50000100000hours
●Control SignalDMX512, sound activated, auto run
●Control modestand alone/ DMX/ master and slaver
●Channel 3458CH
●Color effectRGBW color mixing
●Function Effectdimmer, strobe, gradual change
●Beam Angle: 25°,45°
●Cooling mode: Fan and Convection
●Net Weight7 lbs
K-9 Lights