Kajak Sport KS FOOTREST 2 User manual

KS FOOTREST 2 WITH
STEERING SYSTEM
LIGHT AND COMFORTABLE FOOTREST AND STEERING SYSTEM

2
KS FOOTREST SYSTEM 2  PART LIST
KS FOOTREST 2 WITH STEERING PEDAL,
PART LIST
Parts
514100 KS Footrest system 2 with
steering pedal (without rope)
1. (513111) KS Footrest 2, rail L / R
2. (513112) KS Footrest 2, pedal L / R
3. (513113 KS Footrest 2, center plate
for pedal
4. (514111) KS Footrest 2, steering
pedal
5. (513114) KS Footrest 2, adjusting rod
L / R
6. (513115) KS Footrest 2, rail end
rear/front
7. (462160) Nylock nut M6 A4 x 2 DIN
985
8. (435625) Torx screw M6 x 2
9. (501116) Foam Washer M6 x 2
10. (514112) Spring for steering pedal x 2
KAJAK SPORT
5
1
2
3
6
7
9
8
9
8
67
4
* Optional KS rope set (512141),
full dynema 2,5 mm
10

3
KS FOOTREST 2 WITH STEERING SYSTEM - ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
KAJAK SPORT
General info of the
KS Footrest 2
Kajak Sport footrest mounting
distance is the same than our
previous footrests have. Same
mounting distance is commonly
used in most of the footrest systems
over the world. It makes replacing of
an old or broken footrest easy. Rear
mounting hole is oval to generate
extr tolerance in the mounting
distance.
Footrest parts are L (left) and R
(right) handed and marked with L or
R letter.
1. Push the center plate in the
middle of the footrest pedal to cover
the hole. Center plate will make
clear locking sound when properly
connected.
2. Squeeze the steering pedal spring
in the center of the footrest pedal.
Spring will connect around the
round side supports.
*CLICK*
1
51
399
369 ±1,75
2
SQUEEZE

4
KS FOOTREST 2 WITH STEERING SYSTEM ASSEMBLY INSTRUCTIONS
3. Connect the adjustment rod into
the footrest pedal
4. Slide the footrest pedal in to the
rail. Make sure the adjustment rod is
in open position.
KAJAK SPORT
1
A
4
3

5
KS FOOTREST 2 WITH STEERING SYSTEM ASSEMBLY INSTRUCTIONS
5. Connect the steering pedal in to
the footrest pedal by pushing the
steering pedal hinge clamp inside in
to the hinge bracket of the footrest.
6. Connect both rail end parts. The
one with rope connector will go in
front end.
KAJAK SPORT
1
5
6

6
KS FOOTREST 2 WITH STEERING SYSTEM CONNECTING THE ROPE
Follow the drawings to thread and
connect the steering rope.
1
KAJAK SPORT
Secure node
Secure node

7
KS FOOTREST 2 WITH STEERING SYSTEM ATTACHING
KAJAK SPORT
A. Standard screw attaching
through the hull.
1 . Add foam washer in the back side
of the rail. Foam washer is self-
adhesive
2. Add M6 nuts in to all rail end parts
3. Drill the holes from outside of
the kayak. First drill the other end
and use the rail to determinate the
second hole in correct position.
4. Attach the footrest with M6 x 30
mm screw
1
ATTACHING THE SYSTEM INTO THE KAYAK
Nut M6
M6 x 30 mm
4
3
1
2

8
KS FOOTREST 2 WITH STEERING SYSTEM ATTACHING
KAJAK SPORT
B. Optional attachment with
KS-fastener 6/30 (501210)
1. Laminate the optional KS-fastener
in side into the kayak hull.
2. Add M6 washer and tighten the
footrest with M6 nut.
Code 501210
KS Fastener for
footrest 6/30, AISI 316
B
M6 x 30 mm
1
2

9
KS FOOTREST 2 WITH STEERING SYSTEM ATTACHING
KAJAK SPORT
KAJAK SPORT
C. Replacing an old footrest
attached with M5 x 25 mm
fastener
i. KS-footrest system 2 can also be
attached to an M5 x 25 mm fastener
by using Kajak Sport extension nut
M5 x 15 mm
Code 463515
KS Extension nut
M5 x 15 mm A4
M5 x 25 mm
1
2

10
KS FOOTREST 2 WITH STEERING SYSTEM USAGE
Adjusting the KS Footrest 2
1. Squeeze the steering pedal spring
in the center of the footrest pedal.
Spring will connect around the
round side supports.
2. Connect the steering pedal in to
the footrest pedal by pushing the
steering pedal hinge clamp inside in
to the hinge bracket of the footrest.
3. Spring remains in front of the
steering pedal and pushes it
backwards to keep steering line
tight.
4. Follow the drawings to thread and
connect the steering rope. 1
Turn and push/
pull the rod to
adjust the pedal
KAJAK SPORT