Kammok Swiftlet User manual

Our gear is built for life. Activate your lifetime warranty
by registering your product at kammok.com/register.
WARNING MAXIMUM WEIGHT 400 LB USE HAMMOCK STAND WITH CAUTION. INHERENT RISKS EXIST. Before every use, fully inspect the
hammock and stand for snags, fraying, construction, defects, and general wear and tear. If anything suspicious is found during inspection, discontinue
use immediately and contact the Kammok team with questions. Always make sure to clear the area beneath your hammock. Inspect for objects above
hammock that pose risk of falling (e.g. dead tree limbs.) Under no circumstances should you hang your hammock more than 18 inches off the
ground. Always test the hammock stand to ensure it is setup correctly before putting your full weight into it. Activities other than reclining can result in
injury. Do not permit children to use unattended. Do not jump or swing aggressively in hammock while using your hammock stand. Always follow
provided instructions. Do not modify the stand or hammock in any way; modification may result in failure or injury and will void your lifetime warranty.
Designed in Austin, Texas
Made in China
What’s in the Bag?
What’s Included?
How to Stuff the Carry Bag
2x Arms
Teacup Slider
1x Long Bar 1x Short Bar
4x Feet 1x Carry Bag
2x Feet 1x Short Bar
1x Long Bar
1x Arm
1x Arm
2x Feet

Assembly Instructions
Choose the short or long middle bar
to attach to both arms. The setup
process moving forward is the exact
same either way.
LONG BAR: Recommended for sleeping,
lounging, and multiple people at once.
SHORT BAR: Recommended for tight spaces,
indoor use, the office, campfires, and naps.
2Add Middle Bar
LONG
SHORT
To pack down, follow the instructions above in reverse. Refer to “What’s in the Bag?”
on the other side to see how to pack the parts back into the bag.
Packing Down the Swiftlet
Clip the hammock into the teacup
sliders, ensuring that the hammock
is fully wrapped within the U-shaped
cradles at the ends of each arm.
3Clip in Hammock
Adjust the teacup sliders on each arm to
find your perfect hang.
Make sure the pin snaps in a hole. If you
feel the pin sink down you did it right!
Enjoy the hang!
4Adjust to Perfection
Attach a leg to each side of the arm.
Repeat on the second arm.
1Attach Legs
ARM
LEG
LEG
ARM
PRESS THIS
BUTTON
TIP How to use the snap buttons...
ARM