Kanaan KN39750 User manual

User Manual
HDMI Splitter 1x2
Product number: KN39 50

Thank you for purchasing HDMI splitter from KanaaN.
We hold several brands to produce and distribute our products: LEICKE (power
adapters, batteries), KanaaN (adapters/converters, charging cables etc.), Sharon (iPad
cases with keyboard, fans etc.), Hebron (protective cases, docking stations, screen
protectors etc.) and Manna (notebook cases).
We continuously work on the further development of our products, our customer support
and innovations. ur products have a long service life, are eco-friendly and high
performing. Furthermore, every day we do our very best to satisfy you as our customer.
That is why you, no matter if private or business customer, are in the focus of our
company‘s efforts. We take your reviews and proposals seriously and evaluate them
continuously. That way, we get to know you and your demands on our products and
services better and thus allow for positive enhancements.
To discover more about LEICKE products, or if you have any questions about this
product, visit our website www.leicke.com (production & wholesale) or www.leicke-
distributor.de (distribution) and feel free to contact us.
2

Dear customer,
our devices offer solutions for noise, space and security concerns, data center control,
information distribution, conference room presentations, school and corporate training
environments.
The 1x2 HDMI Splitter accesses multiple HDMI devices using a single source. With this
splitter two HDMI compatible monitors or projectors can be connected easily to one
HDMI device. The splitter can also be placed at the end of a long HDMI cable to
regenerate the HDMI signal.
For optimum performance, please read these instructions carefully before connecting,
operating or adjusting this product. Keep this manual for further reference.
Your LEICKE Team
PACKAGE CONTENTS
Before attempting to use this device, please check the packaging and make sure the
following items are contained in the package:
Number of Pieces Name Note
1 HDMI splitter -
1 power adapter DC 5V/1A
1 user manual -
3

SPECIFICATIONS
Max. single link range ca. 10m (depending on cable quality)
HDMI resolution 480p/576p/720p/1080i/1080p, 3D
(1080p/24Hz)
HDMI version HDMI 1.3b
DVI Resolution 480p/576p/720p/1080i/1080p
Band width up to 225MHz
Input video signal 0.5~1V p-p
Input DDC signal 5V p-p (TTL)
EDID duration 4 seconds
CONNECTION AND OPERATION
Step 1: Connect one cable from HDMI source device into HDMI splitter input.
Step 2: Connect one cable from each display (monitor or projector) into HDMI splitter
outputs.
Step 3: Connect 5V power adapter to the HDMI 1x2 Splitter.
Step 4: When input source and output devices are connected and turned on, the
corresponding LED will illuminate.
Note: To protect the splitter and the other devices, please ensure that the splitter is
without power before you connect it to other devices. Please insert and extract all cables
gently.
4

PANEL EXPLANATION
Figure 1: Front Panel
Figure 2: Back Panel
1. Power LED 2. Power input
3. HDMI input 4. LED of HDMI input
5. 1st HDMI output 6. LED of 1st HDMI output
7. LED of 2nd HDMI output 8. 2nd HDMI output
5
5678
3
2
1
4

TROUBLE-SHOOTING
Please check the connection carefully before turning power on. Make sure, that all
interfaces are connected properly.
Trouble description Possible cause and solution
The splitter seems to be not
working.
First check if the power adapter is working and well
connected. In this case, the LEDs will be illuminated. Then
make sure that all cables are properly connected, in good
condition and that their length is within the maximum
supported length of this splitter. Finally, connect the input
source directly to the display to check if these devices
are working as supposed.
If the maximum resolution of
the two displays is not the
same, which resolution will
be displayed?
In this case, the splitter will display the lower of the two
resolutions.
Please contact us if you cannot solve the problems with the given information.
SAFETY NOTES
•Please use the device as described in the manual.
•Keep away from damp, high temperature, dusty, erosive and oxidative
environment.
•Keep safe from being hit or falling down.
•Do not touch with wet hands.
•Do not pull on power cord when taking off the wall socket.
•Turn off power when device is not in use for a longer time.
•Do not open the cover and do not touch inner parts.
•Use original factory power adapter.
6

Warning: Power adapters with a higher voltage may damage the splitter.
7

CONTACT
If you have any questions, please feel free to contact us.
PRODUCTION & WHOLESALE
LEICKE GmbH
Dohnanyistr. 28
04103 Leipzig
Germany
Web: www.leicke.com
Mail: [e-mail]
DISTRIBUTION
LEICKE Distributor (LEICKE GmbH)
Dohnanyistr. 28
04103 Leipzig
Germany
Web: www.leicke-distributor.de
Mail: [email protected]
8