KAREZONINE Disco Ball User manual

Disco Ball User Manual
KAREZONINE reserves the right to make changes in design and/or improvements upon its
products without any obligation to include these changes in any products theretofore
manufactured.

1
GENERAL INFORMATION
INTRODUCTION
Please read and understand all instructions in this manual carefully and thoroughly
before installing the disco ball. These instructions contain important safety and use
information.
UNPACKING
The product has been thoroughly inspected and has been shipped in perfect operating
condition. Carefully check the shipping carton for damage that may have occurred
during shipping. If the carton appears to be damaged, please carefully inspect each unit
included for damage and contact our customer support team
[email protected] and she/he will help you replace the item.
NOTICE
Please do not discard the shipping carton in the trash. Please recycle whenever
possible.
WARRANTY
GENERAL WARRANTY:
1. 3-month money-back warranty.
2. 12-month replacement warranty.
VIP EXTENDED 24-MONTH WARRANTY:
1. Visit our official website: http://karezonine.net
2. Click Warranty and register as a VIP
3. You will get the extended 24-month replacement warranty.
For all items whether under warranty or not, please firstly send your Amazon order ID
and describe the issue to the service team [email protected] and the
customer support will reach you within 24 business hours.
CUSTOMER SUPPORT EMAIL:
[email protected]
SAFETY INSTRUCTIONS AND GUIDELINES
To guarantee a smooth operation, please follow all instructions and guidelines in this
manual. KAREZONINE is not responsible for injury and/or damages resulting from the
misuse of the item due to the disregard of the information printed in this manual.
Only qualified and/or certified personnel should perform installation of the device
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID
YOUR MANUFACTURES WARRANTY. DAMAGES RESULTING FROM
MODIFICATIONS TO THIS DEVICE AND/OR THE DISREGARD OF
SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID
THE MANUFACTURES WARRANTY AND ARE NOT SUBJECT TO ANY
WARRANTY CLAIMS AND/OR REPAIRS.

2
NEVER TOUCH DISCO BALL WHEN IT IS ROTATING OR DURING
OPERATIO! UNPLUG POWER BEFORE CLEANING DISCO BALL!
KEEP FLAMMABLE MATERIALS AWAY FROM THESE DEVICES!
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE DEVICES TO RAIN AND/OR MOISTURE!
WARNING
DO NOT position devices close to any FLAMMABLE MATERIALS while operating.
DO NOT attempt installation and/or operation of devices without knowing how to do so.
DO NOT permit operation by persons who are not qualified to operate these types of
devices.
Please use the original packaging and materials to transport the device.
MAINTENANCE GUIDELINES
CLEANING & MAINTENANCE
Frequent cleaning is recommended to insure proper function, optimized light output, and
an extended life. The frequency of cleaning depends on the environment in which the
devices operates in damp, smoky or dirty environments can cause greater accumulation
of dirt on the disco ball. Clean the external surface of the ball about every 20 days with
a soft cloth to avoid dirt/debris accumulation.Please check for deformations on the ball.
WARNING
NEVER use alcohol, solvents, or ammonia-based cleaners.
DISCO BALL OVERVIEW
1.
Disco Ball
2.
Disco Ball Eyelet
1
2

3
INSTALLATION INSTRUCTIONS
FLAMMABLE MATERIAL WARNING
Keep devices minimum 5.0 feet (1.5m) away from flammable materials and/or
pyrotechnics.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or
installations.
DO NOT INSTALL THE DEVICES IF YOU ARE NOT QUALIFIED
TO DO SO!
BEFORE MOUNTING DEVICES TO ANY SURFACE OR STRUCTURE, MAKE SURE
THE SURFACE OR STRUCTURE CAN HOLD A MINIMUM POINT LOAD OF 10
TIMES THE WEIGHT OF THE DEVICES.
NEVER STAND DIRECTLY BELOW THE DEVICES WHEN MOUNTING, REMOVING
OR SERVICING.
DEVICES MUST ALL BE INSTALLED FOLLOWING ALL LOCAL, NATIONAL, AND
COUNTRY COMMERICAL ELECTRICAL AND CONTRUCTION CODES AND
REGULATIONS.
DO NOT EXCEED AMBIENT OPERATING TEMPERATURE RANGE OF 86°F. (30°
C)
CEILING AND DISCO BALL MOUNTING
The Disco Ball can be mounted to a disco ball motor[not included] or a variety of other
mounting methods[not included]. Prior to mounting, please ensure that the mounting
method and/or disco ball motor[not included] is capable of supporting the weight of the
disco ball, as well as any clamps[not included], cables[not included] or any other
installation accessories[not included]. PLEASE CONSULT A PROFESSIONAL FOR
CEILING INSTALLATION GUIDANCE!
FREQUENTLY ASKED QUESTIONS
1. Is the ball hallow?
No it is a Styrofoam insert
2. Can I hang it outside?
Nope, you can only hang it indoor. You can also just put it on a surface as decoration.
3. How do you clean the disco ball?
Clean the external of the disco ball surface at least every 20 days with a soft cloth to
avoid dirt/debris accumulation. NEVER use alcohol, solvents, or ammonia-based
cleaners.
More questions?
Please send an email to to the service team [email protected] and the
customer support will reach you within 24 business hours.