KBDCRAFT Kit Adam User manual

01001
Kit
Adam VERSION 3.0
INSTRUCTION MANUAL
KBDCRAFT

② Lubricate the 05001 Stabi with the grace
provided, especially the contact area of the wires.
Be careful with the stems when you reassemble
them.
*The 05002 JWK Stabi is pre-lubed. Therefore no
lube is offered.
③ Put the Stabis on the Plate. Align the wire towards
the notch. Push the wire in first. Then push the back
end down. Make sure the snaps are engaged.
Stabi
① Check the stabilizers. Make sure they're well put
together.
Stabi x4
|
|
|
|
|
|
|
④ Align the Plate, Poron piece, and PCB as making a
sandwich. Finish the Core by installing the switches.

Switch
Stabi
Poron foram
hot swappable
1.6mm PCB
screw-in-stabilizer compatible
Core
type-a
*PCB type-a is designed
for modular keyboard
**Check the PCB function
before assembly.
POM
Plate

Now the fun part begins!
Case

10x
Put the gaskets on.

Put the Core in after this step.

Put the rubber feet on and check the sit.

Keycaps
*It's a 2U left shift

① Open a browser.
② Key in: get.vial.today then you can use the
VIAL Web version or download VIAL.
③ The keyboard will be recognized as Adam0110.
The map will be loaded after you click connect.
④ Test the installation result with the matrix
tester. Make sure all buttons light up.
vial
⑤ The key value and RGBs lights are
configurable.
Backlight mode 
Backlight on & off
Press Fn to active short cut keys of the layer (1) :

Modularity
08001 Wrist Rest
Adam0110a
Adam0110b
01002 Kit Addams
01001 Kit Adam

Enjoy the build!
EST. 2021
SHANGHAI