Keltek L-TRON User manual

CONTACT
Address
KELTEK Incorporated
205 North High Street
Baxter, Iowa 50028
United States
Phone & Fax
Free Toll: + 1 855 855 0328
Phone: + 1 641 227 2222
Fax: + 1 641 227 2323
Online
Email 1: [e-mail]
Email 2: [e-mail]
Website: www.keltekinc.com
FEBRUARY 2018
L-TRON SCANNER
QUICK-START
GUIDE

KELTEK Incorporated | L-TRON Scanner Quick-start Guide
2 // 4
L-TRON SCANNER
QUICK-START GUIDE
MY SCANNER
WON’T TURN ON
1. You’ll know your scanner is not properly receiving power when the LED lights near the
scan head don’t illuminate when you press the scan button. Try these
troubleshooting steps to correct it.
1. Ensure the USB cable is plugged snuggly into the USB port on the
computer dock.
2. Ensure the Computer dock has power by verifying the computer shows it’s
charging.
3. Move the USB cable from the dock USB port to a USB port on the side
of the computer. If the scanner begins working you most likely have a dock
or dock-power issue. If the scanner does not work, contact Keltek to check
the warranty on the scanner.
01 //
GENERAL TROUBLESHOOTING:
MY SCANNER
WON’T SCAN
INTO TRACS
1. If the user’s barcode scanner doesn’t input any data into TraCs, then TraCs has most
likely has not properly established a connection with the scanner. You will know that
TraCs is communicating with the scanner because the scanner will beep when TraCs is
first started up. If you have verified that your scanner is properly illuminating when the
scan button is pressed, but you are still not getting data into TraCS, try these steps:
1. Open TraCS and login as normal.
2. Once TraCS is open, click the tools menu.
3. Select the Reset Scanner button.
4. Click Yes on the confirmation popup.
5. This will clear all previously saved information for the scanner.
6. A popup window will appear and request that you reselect the Vuquest
scanner.
7. Click the scanner and click Select.
8. This should now allow information to flow from that scanner to the forms.
02 //

KELTEK Incorporated | L-TRON Scanner Quick-start Guide
3 // 4
MY SCANNER
IS INSERTING
CHARACTER INTO
MY FORMS
Sometimes a scanner begins inserting what seems to be random characters into the
Drivers License fields in TraCs. To correct this issue, restore the scanner to factory
defaults using the following process.
1. Navigate the user’s computer to www.l-tron.com/support/downloads
2. Click the Quick Start Guide under the General Support section.
3. This opens a PDF with several barcodes on it. Have the user scan the
“Return to Factory Default” barcode straight from the screen. This will
force the scanner to integrate only with TraCs and input the values
correctly.
03 //

KELTEK INCORPORATED
THANK YOU FOR
THE BUSINESS.
CONTACT SERVICE
Address
KELTEK Inc.
205 North High Street
Baxter, Iowa 50028
United States
Direct Link : https://www.keltekinc.com/service/
WWW.KELTEKINC.COM