kENDALL 1915-3-700-12 User manual

®

Tools/Hardware needed:
Screw Driver
and/or Drill
You may also need: Mounng screws
and anchors
Qty 1:
Corner Wall Mount
Cabinet
What’s in the box?
Step 1:
Step 3: Step 4:
Step 2:
Remove mounng frame from wall mount cabinet. Turn
mounng frame so that the eight beveled tabs face up. Posi-
on the mounng frame in corner and use the obround
(oblong) holes to secure the mounng frame to the corner.
Once mounng frame is secured to corner, li and lower the
wall mount cabinet so that each of the eight (8) beveled tabs
slide into the eight (8) slots in the back of the wall mount cab-
inet.
Install screws from the inside of the cabinet(not provided) in
these six (6) locaons BEFORE installing any equipment in the
cabinet.
(Oponal) Install wall mounng screws (not provided) for
addional security in these eight (8) locaons to secure the
cabinet to the mounng frame.