Kenmore 465.1333 Series User manual

E L | T E ®
Drawer Dishwasher
Use& CareGuide
Lavavajillascajon
Gufade usoy cuidado
Lave-vaisselle double tiroir
Guide d'utilisation et d'entretien
m
Z
r'-"
m
Z
Models/Modelos/Modeles
* = color number, nOmero •465.1332*, 465.1333*, 465.1334*, de color, num6ro de couleur m
Zz
0
r"
Z
m
PartNo.6 920130B Sears, Roebuck and Co., HoffmanEstates, it. 60179 USA www.sears.com
FormB/01/07 Sears Canada, Inc., Toronto, Ontario, Canada NI5B2B8 www.sears.ca
All manuals and user guides at all-guides.com
all-guides.com

Important Safety Instructions ................................................ 2
Warranty and Protection Agreements ....................................... 3-4
Parts and Features ......................................................... 5
Start Up Guide ............................................................ 6
Loading ................................................................ 7-8
Dishwasher Recommendations ........................................... 9-10
Detergent ............................................................. 9
Rinse Aid ............................................................. 10
Tone Options .......................................................... 10
Cycles, Options and Lights .............................................. 11-14
Dishwasher Safe Items .................................................... 15
Care and Cleaning ..................................................... 16-18
Troubleshooting ....................................................... 19-20
Gufa de uso y cuidado .................................................... 22
Guide d'utilisation et d'entretien ............................................ 43
All manuals and user guides at all-guides.com

|MPO SAFETY | NSTRUCT|ONS
What You Need to Know About
Safety instructions
Danger, Warning, Caution and Important Safety
Instructions appearing in this guide are not meant
to cover all possible conditions and situations that
may occur. Common sense, caution and care must
be exercised when installing, maintaining or
operating the dishwasher.
Always contact your manufacturer about problems
or conditions you do not understand.
Recognize Safety Symbols, Words, Labels
important Safety instructions
Products with a _ label have been listed with
Underwriter's Laboratories, Inc. -those with a CSA tag
have been listed with Canadian Standards Association.
Nevertheless, as with any other equipment using
electricity and moving parts, there is a potential hazard.
1. Read all instructions before using the dishwasher.
2. Use the dishwasher only for its intended function.
3. Disconnect electrical power to dishwasher before
attempting to service.
4. To avoid electrical shock hazard, the sides and
back must be enclosed and the front panels must
be attached before electrical power is applied to
the dishwasher. Refer to the installation
instructions for proper grounding procedures.
5. Connect to a properly rated, protected and sized
power supply circuit to avoid electrical overload.
6. Children should never be permitted to operate,
play in, with, or around this dishwasher.
7. lie not operate the dishwasher unless all
enclosed panels are properly in place.
8. To reduce the risk of injury when loading items to
be washed, sharp or pointed items should be
located with the handles up. Also, load sharp items
so they are not likely to damage the drawer seal.
9. Use only detergents and rinse additives designed
for a residential automatic dishwasher. Never use
soap, laundry detergent, or hand washing detergent
in your dishwasher. Keep these products out of
reach of children.
10. lie Bet sit, stand on or abuse the drawer(s) or
dish rack(s) of the dishwasher.
11. Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, turn on all hot water
faucets and let the water flow from each for
several minutes. This will release any accumulated
hydrogen gas. As the gas is flammable, de net
smoke or use an open flame during this process.
12. lie not wash plastic items unless marked
"dishwasher safe" or the equivalent. For plastic
items not so marked, check the manufacturer's
recommendations.
13. lie not tamper with controls.
14. To prevent accidental child entrapment and
suffocation risks, always remove the drawers to the
washing compartment when removing an old
dishwasher from service or discarding it.
15. Use caution when unloading the dishwasher.
Dishes may be hot if unloaded shortly after a cycle
has completed.
16. Certified residential dishwashers are NOT intended
for licensed food establishments.
17. To avoid water, mold or mildew damage to your
home, inlet and drain hose connections should be
checked periodically for leaks.
Save These instructions for
Future Reference
All manuals and user guides at all-guides.com

KENMORE ELITE
APPLIANCE WARRANTY
ONE-YEAR LIMITED WARRANTY
When installed, operated and maintained according to all
instructions supplied with the product, if this appliance fails due to
a defect in material or workmanship within one year from the date
of purchase, call 1-800-4-MY-HOME _to arrange for free repair.
FIVE-YEAR LiMiTED WARRANTY ON DRAWER RACKS
For five years from the date of purchase, when this appliance is
installed, operated and maintained according to all instructions
supplied with the product, Sears will replace parts for the drawer
racks if they rust due to defective materials or workmanship. After
the first year, customer assumes any labor costs associated with
rack replacement.
If this appliance is used for other than private family purposes, this
warranty applies for only 90 days from the date of purchase.
THiS WARRANTY COVERS ONLY DEFECTS iN MATERIAL
AND WORKMANSHIP. SEARS WiLL NOT PAY FOR:
1. Expendable items that can wear out from normal use, including
but not limited to filters, belts, light bulbs, and bags.
2. A service technician to instruct the user in correct product
installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed,
operated or maintained according to all instructions supplied
with the product.
5. Damage to or failure of this product resulting from accident,
abuse, misuse or use for other than its intended purpose.
6. Damage to or failure of this product caused by the use of
detergents, cleaners, chemicals or utensils other than those
recommended in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from
unauthorized modifications made to this product.
DiSCLAiMER OF iMPLiED WARRANTIES; LiMiTATiON OF
REMEDIES
Customer's sole and exclusive remedy under this limited warranty
shall be product repair as provided herein. Implied warranties,
including warranties of merchantability or fitness for a particular
purpose, are limited to one year or the shortest period allowed by
law. Sears shall not be liable for incidental or consequential
damages. Some states and provinces do not allow the exclusion or
limitation of incidental or consequential damages, or limitations on
the duration of implied warranties of merchantability or fitness, so
these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in the
United States and Canada. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to
state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Sears Canada Inc., Toronto, Ontario, Canada MSB 2B8
PRODUCT RECORD
In the space below, record your complete model number, serial
number, and purchase date. You can find this information on the
model and serial number label, located as shown inthe Parts and
Features section on page 5. Have this information available to help
you quickly obtain assistance or service when you contact Sears
concerning your appliance.
Model number 465
Serial number
Purchase dam
Save these instructions and sales receipt
for future reference.
3
All manuals and user guides at all-guides.com

PROTECT|
Master Protection Agreements
Congratulations on making a smart purchase. Your new
Kenmore :_product is designed and manufactured for
years of dependable operation. But like all products, it
may require preventive maintenance or repair from
time to time. That's when having a Master Protection
Agreement can save you money and aggravation.
The Master Protection Agreement also helps extend
the life of your new product. Here's what the
Agreement* includes:
Parts and labor needed to help keep products
operating properly under normal use, not just
defects. Our coverage goes well beyond the
product warranty. No deductibles, no functional
failure excluded from coverage - real protection.
Expert service by a force of more than 10,000
authorized Sears service technicians, which
means someone you can trust will be working on
your product.
Unlimited service calls and nationwide service,
as often as you want us, whenever you want us.
"No=lemon" guarantee -replacement of your
covered product if four or more product failures
occur within twelve months.
Product replacement if your covered product can't
be fixed.
Annual Preventive Maintenance Check at your
request -no extra charge.
Fast help by phone -we call it Rapid Resolution -
phone support from a Sears representative on all
products. Think of us as a "talking owner's manual:'
Power surge protection against electrical damage
due to power fluctuations.
$250 Food Loss Protection annually for any food
spoilage that is the result of mechanical failure of
any covered refrigerator or freezer.
Rental reimbursement if repair of your covered
product takes longer than promised.
10% discount off the regular price of any non-
covered repair service and related installed parts.
Once you purchase the Agreement, a simple phone
call is all that it takes for you to schedule service. You
can call anytime day or night, or schedule a service
appointment online.
The Master Protection Agreement is a risk free
purchase. If you cancel for any reason during the
product warranty period, we will provide a full refund.
Or, a prorated refund anytime after the product
warranty period expires. Purchase your Master
Protection Agreement today!
Some limitations and exclusions apply. For prices
and additional information in the U.S.A. call
1=800=827=6655.
* Coverage in Canada varies on some items. For
full details call Sears Canada at 1=800=361=6655.
Sears Installation Service
For Sears professional installation of home appliances,
garage door openers, water heaters, and other major
home items, in the U.S.A. or Canada call
1=800=4= NIY=N0ME.
All manuals and user guides at all-guides.com

PARTS
This guide covers several different models. The features on your dishwasher may vary from those shown below.
A. Left side rack
B. Fold-down utility shelf
C. Middle rack
D. Right side rack
E. Upper wash arm paddle (select models)
E Wash manifold
G. Spray arm
H. Coarse filter cup
I. Coarse filter plate
J. Detergent dispenser (inside front drawer)
K. Rinse-Aid dispenser (inside front drawer)
L. Utensil basket
M. Control panel (on drawer top edge)
N. Indicator lights (select models)
O. Model and serial number (on side of drawer)
P. One-piece rack
Q. Fold-down utility shelf
R. Plate tine insert
A
BThree=piece rack
(select models[}
CD
QOne=piece rack
P (select models[}
R
Control Panels"
/Cycles Options
CycLes Options
@ @ @ @ @ , , , _ _ c,e_,®
Heavy Normal China Quick Quick
Wash Wash Gentle Wash Rinse RinseAid Low @
HoEd 3 Sec Fo Lock
./
_Styles and features may vary by model.
5
All manuals and user guides at all-guides.com
all-guides.com

START GU| E
Before You Start
, Do not pre-rinse. Simply scrape off any bones or
large food particles.
, If you have a food waste disposer make certain that
the disposer is empty before starting the dishwasher.
,Periodically check the coarse filter cup and empty if
necessary before starting the dishwasher (see page 17).
, Scrape off tomato-based food soils (see page 16).
, Remove certain foods such as mustard, mayonnaise,
lemon juice, vinegar, salt or dressings from stainless
steel flatware as soon as possible. These foods may
cause rusting and pitting if allowed to remain in
contact with the surface of the flatware for an
extended period of time.
Rinse Aid
Important: This dishwasher is designed to use a
liquid rinse aid. Rinse aid greatly improves drying,
reduces spotting and filming, and reduces
moisture left on the dishwasher interior by
creating a "sheeting" action. Water "sheets" off
dishes, preventing drops of water from remaining
on dishes and creating spots. Drying performance
will improve after several washes using rinse aid.
An automatic Rinse Aid dispenser is located next to
the detergent cup.
An illuminated light on the control panel indicates
when the rinse aid reservoir needs to be refilled. Check
the dispenser monthly. To fill and adjust the amount of
rinse aid dispensed into the dishwasher, see page 10.
Hot Water
For optimal cleaning and drying results, hot water is
necessary. The incoming water temperature should be
120° F (49° C) to properly activate the detergent and
melt greasy food soils.
To check the incoming water temperature, turn on the
hot water faucet nearest the dishwasher and let it run
into a glass in the sink. Place a candy thermometer in
the glass and check the temperature once it has
stopped rising.
Starting the Dishwasher
1. Check that the coarse filter cup is securely in place
(see page 17).
2. Load the dishwasher and add detergent.
3. Select the desired cycle and options by pressing the
pads on the control panel. The indicator lights for the
selected cycle and options will illuminate. To cancel a
cycle or select another cycle, press the Cancel/Brain
pad. To cancel an option, press the option pad again,
or press the Cancel/Brain pad.
.To start a cycle, press the Start/Resume pad once,
then close the drawer. After a brief pause, the cycle
will begin. To prevent unplanned cycle or option
changes, these selections are "locked in" after the
initial fill is complete.
Notes:
, If Start!Resume is not pressed within 30 seconds of
choosing a cycle, the dishwasher will turn off.
, Press the Start/Resume pad once, then close the
drawer. Drawer must be closed within 3 seconds
after pushing Start/Resume or the lights will flash
and the audio alarm sound will be heard. After
closing the drawer there will be a brief pause before
the cycle begins. If Start/Resume light is flashing,
unit will not start automatically; the Start/Resume
button will need to be pressed to restart.
The dishwasher remembers your last cycle so you do
not have to reset the cycle each time. To start the
dishwasher using the same cycle and options
selected on the previous wash, just press the
Start/Resume pad.
5. To cancel a running cycle, press the Cancel/Drain
pad once. The dishwasher will drain, then shut off.
To turn the dishwasher off without draining, press the
Cancel/Drain pad twice.
Notes:
, If a cycle pad is pressed after the controls have been
"locked in': the light above the current cycle will flash
three times and an audible beep will be heard.
, If you have a two-drawer dishwasher model, each
drawer has its own controls and can run
independently of the other.
Adding aForgotten item
For best cleaning, the forgotten item should be added
early in the cycle.
1. Grasp drawer handle and open drawer. Press the
Start/Resume pad once.
2. With the drawer open, add the item.
3. Press Start/Resume then close the drawer within 3
seconds of pressing the button. If Start/Resume light
isflashing, unit will not start automatically; the
Start/Resume button will need to be pressed to restart.
I N°te: Extendedinterrupti°n°fthewashcyc'eisInotrecommended.
All manuals and user guides at all-guides.com

LOAD|
General Recommendations
. Items can be centered behind a single tine or loaded
at an angle to maximize space.
.Avoid blocking or preventing the spray arms from spinning
freely. Do not allow items to extend beyond the racks.
Face soiled surfaces toward the center of the dishwasher.
Do not load anything above the inside top edge of
the drawers. To avoid damage to the dishwasher and
dishes, items should not touch the upper portion of
the dishwasher when closing the drawee Close the
drawer gently, do not slam shut. This rack can
accommodate items up to 11" (25.4 cm) in height.
Large plates should be loaded toward the back of the
drawer. Avoid stacking or overlapping dishes.
For best dishwashing results follow guidelines on the
following pages to determine the best arrangement for
your items.
Important: Do not remove the racks from the
dishwasher drawer when loaded with dishes.
Recommended Drawer Loading
Glasses, cups,
stemware, light-
weight plastics,
plates, bowls,
pans, long-
handled utensils etc.
can be loaded in
either rack. Do not
load glasses over
the tines.
The utility shelf on
the left side of the
rack folds up or down for loading flexibility. Fold it
down to hold long-handled knives, spatulas and
spoons or short items like
cups or juice glasses. Fold
it up for taller items such as
glasses, bowls, plates, etc.
The edge of the utility shelf
is designed to hold
stemware in place.
If you have a two-drawer dishwasher model, each
drawer has its own controls and can run independently
of the other. For a 10 pc. place setting load, a two-
drawer dishwasher model is required. A single drawer
can hold a 5 pc. place setting load.
For a two-drawer 10 pc. place setting load, see
recommended loading images below. For a single
drawer appliance, either loading image may be used.
Upper Drawer
Lower Drawer
AHANI-IO pc. place setting
Drawer Loading Options
A variety of items
such as dinner plates,
mixing bowls, pots,
pans and baking
dishes can be loaded
in the rack. Do not
block rear spray
action; poor wash
performance may
result.
Five glasses
loaded under
utility shelf.
7Cont.
All manuals and user guides at all-guides.com

Variable Tines (select models)
Variable tines, located in
the back half of the drawer,
provide convenient loading
space for almost any sized
item. Positioning the tines
flat or splayed out creates
adequate room for large,
bulky items like pots and pans or mixing bowls.
Angling tines out accommodates up to 12" plates.
To position tines:
1. Carefully pull back on the last tine until notches are
removed from the clip.
2. Rotate tine forward into the notches that best fit the
size of the dish.
3. Release tine to lock into place.
Sliding Tines !:so=octmode=s)
Sliding tines, located in
the front half of the
drawer, can be adjusted
to provide narrow
spacing for loading
plates or wide spacing
for loading deep bowls,
pots or pans. Slide one
or both sets of tines
toward the back or front of the drawer for narrow or
wider spacing. Leave proper spacing between the
items in sliding and variable tines (select models) for
increased wash performance.
Utensil Basket
For optimum wash performance the utensil basket
should be placed along the front of the drawer with
the handle against the tub. Load the basket while it is
in the rack or take the basket out for loading on a
counter or table.
Place small items like baby bottle
caps, jar lids, corn cob holders,
etc., in a covered section (select
models). Close the cover to hold
small items in place.
Be sure that nothing protrudes
through the bottom of basket or rack
to block the spray arm.
To avoid damaging the silver finish, do not mix
silver and stainless.
When covers (select models) are folded down flat
against the basket, mix items in each section of the 8
basket with some handles pointing
up and some with handles down.
Load knives handles up and spoons
and forks handles down. Use of utensil
basket lids improves cleaning performance.
Sabbath Guidelines :selectmodels:
For those who observe Kosher dietary guidelines,
Star-K has certified that the drawers in the 2-drawer
model are separate and therefore one drawer can be
designated to wash utensils used for dairy, while the
other can be designated for washing meat utensils.
HOWEVER, NEITHER DRAWER CAN BE USED TO
WASH DISHES ON THE SABBATH OR HOLIDAYS. =
Storage of dishes
Although washing of dishes with the drawer dishwasher
is not permitted on the Sabbath or on holidays, storage of
dishes is possible by following the guidelines listed below.
Deactivation of controls:
To deactivate the audible tones and lights, see page 10
and follow the instructions under Rinse Aid Adjustment
Mode/Tone Options.
. To deactivate the Rinse-Aid Low indicator, level "0"
should be selected for the Rinse Aid dispenser level.
This will shut off the Rinse Aid dispenser until the
controls are reactivated.
. To deactivate the tone options, both Delay Hours
option lights should be turned off.
.If the Child Lock feature has been set, this will also
need deactivation. See page 12 for further instructions.
Reactivation of controls after the Sabbath:
To reactivate the controls, repeat the process from page 10
and select the desired rinse aid and tone options levels. For
reactivation of the Child Lock feature, see page 12.
Important: Care should be taken when opening the
drawer(s) and loading dishes while in the disabled
mode as an accidental key press could activate the
indicator lights.
Notes:
. If needed, be sure to allow enough time to run a
cleaning cycle prior to the start of the Sabbath.
.Clean dishes should be unloaded from the drawer
dishwasher prior to setting the controls for the
Sabbath to prevent activation of the indicator lights.
All manuals and user guides at all-guides.com

| ,CO
Detergent
Use a detergent designed specifically for use in an
automatic dishwasher. Be sure it is fresh. Store powdered
detergent in a cool, dry place (not under the sink}.
important Notes:
.For optimal wash performance, powdered
detergent is recommended for use in the drawer
dishwasher dispenser.
Dishwashing detergent gel or powder packets/
tablets can be used. To prevent potential residue
or decreased wash performance when using
these items, it is recommended that the dispenser
lid not be closed to allow the detergents to
dissolve properly from the beginning of the cycle.
Filling the detergent dispensers:
1. Press the lever down to open the Main Wash
dispenser lid if not already open.
2. Pour detergent into both the Pre-Wash and Main
Wash compartments as necessary.
3. After filling the compartment(s}, close the Main
Wash dispenser lid until it clicks shut.
Detergent will automatically be released into the
dishwasher drawer during the wash cycle. The
Pre-Wash compartment will immediately begin to
dispense detergent into the dishwasher drawer.
Important: Do not use detergent with the Quick
Rinse cycle. Leave the dispenser lid open when
running Quick Rinse.
Recommended Amount
Too little detergent results in poor cleaning, hard water
filming/spotting and poor drying. Too much detergent
can cause permanent etching/cloudiness.
Suds can cause the dishwasher to overflow. Measure
the detergent carefully and use only detergents
designed for use in a dishwasher. Less detergent is
needed in soft water. Try another brand of detergent if
sudsing continues.
The amount of detergent to use is determined by the
hardness of the water and soil level of the load. Refer
to the following chart for detergent usage
recommendations.
Soft Light Soil 1 tsp 2 tsp
(era4 gpg) Normal Soil 2 tsp 2 tsp
Heavy Soil 3 tsp 3 tsp
Medium
C5-9 gpg) All Levels 3 tsp 3 tsp
Hard
[10-12 gpg) All Levels 3 tsp 3 tsp
*Your local Sears store, water utility or state university extension
service can tell you the degree of water hardness in your area.
In extremely hard water conditions (13 grains per
gallon or more*:), it is difficult to achieve good
results with any dishwasher.
A mechanical water softener may be necessary to
improve water quality, detergent effectiveness,
and protect the dishwasher parts from the
damage that hard water can cause.
9
All manuals and user guides at all-guides.com

D|SHWAS
Rinse Aid
important: This dishwasher is designed to use a
liquid rinse aid. Rinse aid greatly improves drying,
reduces spotting and filming, and reduces
moisture left on the dishwasher interior by
creating a "sheeting" action. Water "sheets" off
dishes, preventing drops of water from remaining
on dishes and creating spots. Drying performance
will improve after several washes using rinse aid.
Note: If experiencing a large amount of foaming,
rinse aid level may need to be adjusted.
The automatic Rinse Aid dispenser
is located next to the detergent
cup. A pre-determined amount of
rinse aid will be added during the
final rinse. When the dispenser is
low and needs to be refilled, an
indicator light on the control panel
will illuminate.
Filling Rinse Aid dispenser:
]. Turn the plug ]/4 turn counterclockwise and remove.
2. Pour liquid rinse aid into the circular opening until
liquid reaches the FULL level marking.
3. Wipe up any rinse aid that spills into the dishwasher
with a damp cloth to prevent excess foaming.
4. Place the plug back into the Rinse Aid dispenser,
turning clockwise until the plug is secure.
Rinse Aid Adjustment Mode
Important: The rinse aid mode cannot be adjusted
while a cycle is running, if the Delay Hours option is
running or if the dishwasher is performing a
Cancel/Drain.
To enter the rinse aid adjustment mode:
1. Press and hold the High Temp Wash option
pad for three seconds. An audible chime will
sound to indicate you have entered the rinse aid
adjustment mode.
2. The rinse aid has four levels, with "0" being the
lowest (no rinse aid being dispensed) and "3" the
highest. With each consecutive press of the
High Temp Wash option pad, the amount of rinse
aid dispensed into the dishwasher drawers will be
increased.
3. The cycle light will illuminate with each touch of the High
Temp Wash option pad to indicate the rinse aid level. 10
oOFF OFF OFF
1 ON OFF OFF
2 ON ON OFF
3ON ON ON
the Rinse-Aid Low indicator light.
4. Pressing any key pad other than other than High
Temp Wash will exit the rinse aid adjustment mode.
If power is lost, the rinse aid level will default to the last
saved setting.
Tone Options
Important: Tone options cannot be adjusted while a
cycle is running, if the Delay Hours option is running
or if the dishwasher is performing a Cancel/Drain.
To enter the tone options:
.
.
.
Press and hold the High Temp Wash option pad for
three seconds. An audible chime will sound to
indicate you have entered the tone options.
To change the tone options, press the Delay Hours
option pad.
Each press of Delay Hours will toggle between the
available settings. Delay Hours lights will illuminate
with each touch of the Delay Hours pad to indicate
the tone option.
Drawer open/End-of-cycle OFF OFF
chime disabled
Drawer open chime enabled ON OFF
End-of-cycle chime enabled OFF ON
Drawer open/End-of-cycle 0 N 0 N
tone options enabled
4. Pressing any key pad other than Delay Hours will
exit tone options.
If power is lost, the tone options will default to the last
saved setting.
All manuals and user guides at all-guides.com
all-guides.com

CYCLES LI
Choose the cycle that best describes your dish load by pressing the corresponding touchpad (select models) or by
pressing the Cycle Select pad (select models) until the desired cycle is lit. (See page 6, Start Up Guide, for how to
begin the cycle).
In addition to choosing a cycle, choose as many available options as necessary for your load.
, Cycles and options cannot be changed after the cycle has started.
, If Anti=Bacterial (select models) is selected, Sani=Rinse (select models) will automatically be selected
and can not be cancelled.
Smart
Sense'°*+
(select models)
Heavy Wash
Anti=
Bacterial+
(select models)
China=
Gentle
An adaptive cycle that adjusts the
number of fills, wash times and
temperatures based on the turbidity of
the water. The turbidity sensor
determines the dish soil level and
selects the proper wash cycle.
A long cycle that uses more time, water
and applied heat than the Normal Wash
cycle.
When the cycle monitor recognizes that
the proper conditions have been met, the
Sanitized light will activate at the end of
the cycle. Sanitization may not be
achieved if there is an interruption of the
cycle, power failure or if the incoming
water temperature is below 120° F (49° C}.
A medium cycle for washing loads
with normal food soil levels.
Use this cycle for lightly soiled china
and crystal. This cycle uses a gentle
wash and rinse. Towel drying may be
required.
Min. 57
Max. 138**
8O
8O
6O
] wash/2 rinses
4 washes/2 rinses
4 washes/2 rinses
4 washes/2 rinses
] wash/2 rinses
4 washes/2 rinses
] wash/2 rinses
Sensor Dry
(select models)
Sani-Rinse+
(select models)
High Temp Wash
Delay Hours
High Temp Wash
Delay Hours
Sensor Dry
Sani-Rinse+
High Temp Wash
Delay Hours
Sensor Dry
Sani-Rinse+
High Temp Wash
Delay Hours
Sensor Dry
High Temp Wash
Delay Hours
Quick Quick cycle for light food soil. Towel
Wash drying may be required 38 1 wash/2 rinses Delay Hours
Use this rinse cycle when rinsing place
Quick settings you plan to wash later, or for
Rinse freshening up dishes that have been 18 2 rinses -
stored for a period of time.
+ Only these cycles has been designated to meet NSF requirements (NSF/ANSI ] 84 Residential Dishwashe0.
Number of fills will vary depending on the soil level of each load.
_*Timesare based on immediate availability of 120° F hot water at the start of the cycle. This can be achieved by turning on the kitchen
faucet and running water until hot prior to starting the dishwasher.
Notes:
.All times are approximate.
*Fill length varies between different models.
*Fill time will vary depending on water pressure.
*Cycle times shown will increase or decrease based on each
load's soil level, water temperature and selected options.
*Fandry can be 30 minutes up to 4 hours depending on
cycles selected. The extended fan time uses minimal
energy. Dry time is optimized per cycle performance by
selecting Sensor Dry.
*If the drawer is open for more than 30 seconds with the
Clean light on, extended dry will automatically turn off.
*Even if rinse aid is used, the first few loads may leave
dishes with more water than normal. This effect will
dissipate after a few loads.
11
All manuals and user guides at all-guides.com

CYCLES PT| LI
Sensor [_1_ (select models)
Sensor technology allows the dishwasher to
provide optimum drying performance based on the
water temperature reached during the wash cycle and
use of rinse aid. Rinse aid helps reduce drying time.
Drying performance will improve after several washes
using rinse aid.
At the end of the selected cycle, after the clean light
turns on, the fan may run an additional 31/2hours or
until the drawer is opened for more than 30 seconds.
The extended fan time uses minimal energy.
Child Lock
Iioi sc o_ ><::k
The control touchpads can HoldSSec.ForLock
be locked to prevent small children from starting and
stopping the dishwasher or from changing the cycle
and option selections. If this feature is activated
between cycles, the dishwasher cannot be operated
until the controls are unlocked. The controls can not
be locked after a cycle or delay has started.
Setting the ChiJd Lock:
1. Press the Sensor Dry or Lock pad and hold for
three seconds.
2. An indicator light next to the lock graphic will
illuminate when the controls are locked.
To cancel:
1. Press the Sensor Dry or Lock pad and hold for
three seconds.
2. The indicator light will go off.
Notes:
* If a cycle or option pad is pressed after the
controls have been locked, the indicator light next
to the lock graphic will flash three times and the
dishwasher will beep four times.
* This option does not lock the drawer, only the
dishwasher controls.
Saai-Riase (select models)
Sani-Rinse increases the water temperature in the final
rinse, raising the temperature to meet sanilzalon
requirements. The Sanitized indicator light to the far right
of the control panel will not light if all requirements for
sanitzalon have not been met. Sani-Rinse can be
selected with Normal Wash and Smart Sense" cycles.
Important: Sani-Rinse is mandated when using an
Anti-Bacterial cycle and cannot be cancelled.
To select, press the Sani=Rinse pad after making your
cycle selection. To cancel this option, press the
Cancel/Drain pad.
High Temp Wash
This option adjusts cycles to provide additional wash
time and temperature to aid in the removal of heavy
and/or baked-on soils. Selecting this option will extend
wash time by increasing water temperature and/or the
number of fills in the wash cycle.
To select, press the Nigh Temp Wash pad after
making your cycle selection. To cancel this option,
press the pad again, or press the Cancel/Drain pad
to cancel all selected cycles and options.
12
All manuals and user guides at all-guides.com

CYCLES LI
Delay Hours
The Delay Hours option can be used to
automatically start the cycle at a more convenient time
or to take advantage of reduced energy costs if
available in your area. This option is also useful for
conserving hot water at times of high household usage
(showers, laundry).
To set up a delay:
1. Select the desired cycle and options for the load.
2. Press the Delay Hours pad until the desired
amount of delay time is selected. There is a 2, 4 and
8 hour delay option. Continue pressing the Delay
Hours pad until you have made your selection.
3. As soon as the Start/Resume pad is pressed, the
delay time will begin counting down. When
counting down, the indicator light will change from
8 to 4 to 2 when the lower hour is reached.
4. The cycle will automatically start and the indicator
light will go out as soon as the delay time expires.
Notes:
. If 30 seconds elapse between setting the cycle
and options and pressing the Start/Resume or
Cancel/Drain pad, the dishwasher will turn off.
. Press the Start/Resume pad once, then close the
drawer. Drawer must be closed within 3 seconds
after pushing Start/Resume or the lights will flash
and the audio alarm sound will be heard.
To cancel a delay, press the Cancel/Drain pad once.
To cancel a running delay and start the cycle, press
the Delay Hours or Start/Resume pad.
indicator
1) Washing
2) Drying
3) Clean
Lights on Outside of [}rawer Dishwasher (select,,,oaels)
The washing cycle indicator light, located on the front of the drawer, will illuminate prior
to the first fill of any cycle. It will remain illuminated until the completion of the final
drain. The washing indicator light will flash when the drawer is opened during the wash
portion of an operating cycle. If the drawer has been opened during a wash cycle,
Start/Resume will need to be pressed before the cycle will resume.
The primary drying indicator light, located on the front of the drawer, will remain lit until
the primary drying portion of the cycle is complete. Drying will continue even after the
drying light goes out. If the drawer has been opened during a dry cycle, Start/Resume
will need to be pressed before the cycle will resume.
The clean indicator light, located on the front of the drawer, will illuminate when the
primary dry time has been completed except when the Quick Rinse cycle is selected. It
will remain illuminated until the drawer is open for 30 seconds. If there has been a
power loss, the clean indicator light will not relight until after the next cycle is run.
13
All manuals and user guides at all-guides.com

CYCLES PT| LI
indicator Lights on Control Panel
See page 5 for all model indicator lights.
Only the indicator light for the currently selected delay setting will be illuminated during a
Belay Hours delay selection. For example, if a 4 hour delay is selected, the 2 hour and 8 hour delay
indicator lights will not be illuminated (see page 13 for operation of the Delay Hours option).
StartlResume
The Start!Resume indicator light, located on the top of the drawer, will be illuminated while the
dishwasher is executing a cycle or delay whether or not the drawer is open. The Start!Resume
indicator light will not illuminate in any other mode. If the drawer is opened during a wash
cycle, the Start!Resume indicator light will flash until it is pressed to restart the cycle.
Cancel/Drain The Cancel/Drain pad will illuminate to indicate that a cancel initiated drain is running.
Sanitized Illuminates at the end of the cycle when conditions have been met to achieve sanitization.
(selectmodels) The light will remain lit until the drawer has been open for 30 seconds continuously.
Clean The Clean indicator light, located on the control panel, will illuminate as soon as any
(selectmodels) cycle except Quick Rinse is completed.
Rinse-Aid Low Illuminates when the Rinse Aid dispenser is low or empty and the drawer is open.
NOteS:
, When the Anti-Bacterial (select models), Smart Sense"' (select models) or Normal Wash cycle with Sani-Rinse
(select models) is selected, the final rinse cycle is monitored to assure sanitization. The Sanitized light will not
illuminate if sanitization requirements are not met. This could happen if the cycle is interrupted, power failure
occurs or incoming water temperature is below 120° F (49° F).
, The Clean and Sanitized indicator lights will not relight after a power failure until after the next cycle is run.
14
All manuals and user guides at all-guides.com

| ER SAFE itEMS
Most tableware, cookware and flatware can be safely washed in your dishwasher. Check with the manufacturer.
Aluminum Yes, if labeled dishwasher High water temperature and detergents may affect finish.
safe or coated with a
protective finish.
Cast Iron No Seasoning will be removed, and iron will rust.
China/Stoneware Yes, except antique or Always check manufacturer's recommendation before washing.
hand-painted. Antique, hand-painted or over-the-glaze patterns may fade. Gold
leaf may discolor.
Crystal Yes, except antique or Always check manufacturer's recommendation before washing.
delicate crystal. Some types of leaded crystal may etch with repeated washings.
Filters Not recommended. May leave a dingy deposit or stain on dishwasher interior.
Glass Yes A specialty glass called milk glass can yellow with repeated
dishwasher washing.
Gold-Plated Will discolor.
Flatware
Pewter, Tin
Plastics
Stainless Steel
Sterling Silver or
Silver Plate
No
No
Yes, except disposable
plastic items.
Yes
No, if has commercial
"darkening':
Always check manufacturer's recommendation before washing.
Plastics vary in their capacity to withstand high water
temperatures and detergents. Disposable plastic items are not
dishwasher safe for this reason.
Run a Quick Rinse cycle (rinse only cycle) if not washing
immediately. Prolonged contact with foods containing salt,
vinegar, milk products or juice could damage finish.
Always check manufacturer's recommendation before washing.
Run a Quick Rinse cycle (rinse only cycle) if not washing
immediately. Prolonged contact with food containing salt, acid or
sulfide (eggs, mayonnaise and seafood) could damage finish.
Commercial "darkening" may be removed by detergent.
Wooden Items No Wood may warp, crack or discolor.
Top Rack Items Yes Items labeled as "top rack only" can be washed in either (select
models) the top or bottom drawer.
15
All manuals and user guides at all-guides.com
all-guides.com

CARE CLEAN G
General Recommendations
The dishwasher interior is normally self-cleaning.
Periodically check the bottom of the dishwasher
drawer to see if any large food particles remain.
Wipe the edge of the drawer to remove any food soil
splashes that occurred during loading.
When cleaning the stainless steel exterior, always
wipe with the grain. Never use products containing
chlorine bleach or citric acid.
, The color from some tomato-based food soils may
occasionally adhere to various components of the
dishwasher interior, causing temporary discoloration.
To minimize this:
, Remove excess tomato-based food soils from
dishes before loading.
, Run the Smart Sense '° (select models) or Heavy
Wash (select models) cycle when washing loads
containing tomato-based food soils.
, Be sure to use a dishwasher detergent that
contains chlorine to better fight staining.
Standard Exterior
Stainless Steel
Exterior
(:select models)
Light to moderate
Daily cleaning and light soil
Soft, damp cloth and liquid spray cleaner. De net
use abrasive powders or cleaning pads.
Soft cloth or sponge and one of the following:
Mild detergent and water
A solution of white vinegar and water
Glass and surface cleaner or similar
multi-surface cleaner. Follow with rinse and dry.
De net use products containing chlorine bleach
or citric acid.
Moderate to heavy soil Soft cloth or damp sponge and stainless steel
cleaner. Follow with rinse and dry.
Streaks or fingerprints/restore shine Soft cloth and stainless steel cleaner.
Discoloration Soft cloth or damp sponge and stainless steel
cleaner. Rinse immediately and dry.
Light to moderate Soft cloth or damp sponge.
Interior Discoloration or tomato-based stains Switch dishwasher detergent to
chlorine-based product.
Moderate to heavy soil
Call 1-800-4-MY-HOMP' (1-800-469-4663)to order.
o Make a paste with powdered dishwasher
detergent on a damp sponge and clean.
See the vinegar rinse procedure in Glassesare
cloudy/spotted in Troubleshooting.
Run a Normal Wash cycle with detergent after
cleaning the interior.
16
All manuals and user guides at all-guides.com

CLEAN|
Coarse Filter Cup 3.
The coarse filter cup is
located on the floor of the
dishwasher drawer. It is
designed to collect large
food and non-food items
that cannot be
processed through the
dishwasher disposal
system, i.e. bone,
broken glass, etc.
Check and empty the
coarse filter cup if food
soil remains on the
coarse filter plate. This
ensures foreign objects
are not recirculated
through a cycle, causing possible damage to dish load.
important: Do not start the dishwasher until the
coarse filter cup is securely in place and flush with the
coarse filter plate. Doing so may damage the
dishwasher motor and/or spray arm.
Cleaning the coarse filter plate and coarse filter cup:
If coarse filter plate accumulates food soil, cleaning of
the coarse filter cup is needed.
Three-Piece Rack (select models:)
1. Make sure that the dishwasher drawer is cool before
you clean the coarse filter plate and coarse filter cup.
2. Pull drawer out to
its full extension.
Make sure the rack
is empty. Fold the
variable tines along
the back flat on
the rack. Grasp
the front center of
the rack and pivot
upward to access
the coarse filter cup.
.
.
.
Wipe the coarse filter plate with a damp cloth in a
clockwise motion.
To remove the coarse filter cup, unscrew the small
cap turning in a counterclockwise motion. Lift and
remove the coarse filter cup out of the drawee
Empty the cup of hard objects and food soil. Rinse
cup under hot water.
Place the coarse filter cup back into the coarse filter
plate and tighten the cap, turning in a clockwise
motion. Make sure the coarse filter cup is flush
with the coarse filter plate.
Pivot the center rack downward to its original
position.
8. Make sure spray arm rotates freely.
NOteS: Removal of the center rack is not
recommended, however if it is needed:
, Pull drawer out to its full extension. Make sure
the rack is empty. Fold the variable tines along
the back flat on the rack. Grasp the front center
of the rack and pivot upward.
Pivot the rack
toward the left.
, Pull the rack
toward the front of
the drawer and lift
up to remove.
To reinstall the
rack:
, Place the hook in the loop on the back left corner
of the rack.
, Pivot the rack to the right, then pivot downward to
its original position.
17
All manuals and user guides at all-guides.com

CAR CLEAN|
One-Piece Rack
1. Make sure that the dishwasher drawer is cool before
you clean the coarse filter plate and coarse filter cup.
2. Pull drawer out to its full extension. Remove plate
tine insert from rack and set aside.
3. Wipe the coarse filter plate with a damp cloth in a
clockwise motion.
4. To remove the coarse filter cup, unscrew the small
cap, turning in a counterclockwise motion. Lift and
remove the coarse filter cup out of the drawer.
5. Empty the cup of hard objects and food soil. Rinse
cup under hot water.
6. Place the coarse filter cup back into the coarse filter
plate and tighten the cap, turning in a clockwise
motion. Make sure the coarse filter cup is flush with
the coarse filter plate.
Z Replace the plate tine insert.
8. Make sure spray arm rotates freely.
Long Term Storage/Moving
1. Fill detergent cup with a fresh-scented dishwasher
detergent or baking soda, close the lid and select
the Quick Wash cycle. Allow the dishwasher to
complete the cycle.
2. Turn the water supply off and drain the dishwasher.
Press Cancel/Drain once to activate the drain.
3. Operate the drain twice to ensure most of the water
is removed.
4. Disconnect the electrical supply and prop open the
drawer.
5. Be sure dishwasher is clean and dry.
NOte: When turning the water supply to the
home off, the water shut=off at the dishwasher
must be turned off as well.
18
All manuals and user guides at all-guides.com

T L
Dishwasher will not fill
Dishwasher will not drain/
water in tub bottom
Press the Start/Resume pad to start the dishwasher.
, Drawer must be closed within 3 seconds after pressing Start/Resume.
, Be sure drawer is closed securely.
, Be sure the water is turned on.
, Check that the pads are properly selected for a cycle and/or option.
, Check your home's circuit breaker or fuse box.
l
e
e
e
e
If hooked up to a food waste disposer, be sure the knock-out is removed from the
disposer inlet.
Check for food or foreign object obstruction in the drain filter, coarse filter cup or
disposer.
Check drain hose for a kink.
Check your home's circuit breaker or fuse box.
Check that the cycle is completed (see pg. 13-14).
Dishwasher adds water at This isnormal. The sensor in the pump must stay submerged so a short fiii of water is
end of cycle (select models) added after the cycle's lastdrain.
Detergent cup is not empty Check that the cycle is completed (see pg. 13-14).
Be sure dispenser is not blocked.
Use fresh powdered detergent stored in a cool, dry place.
Dishwasher seems noisy
Cycle takes too long
Dishwasher has an odor
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
Dishwasher leaks
Indicator lights flashing
(select models)
A water valve hiss during fill is normal.
Water circulation sounds are normal.
A thumping sound may be a wash arm bumping an item that is extending below the
rack(s). Re-adjust load to avoid obstructing spray arm.
Chopping or grinding sounds may be heard during the drain portion of the cycle as
the internal chopper blade chops hard items like fruit seeds, nuts, etc.
Humming during the drain is normal.
A snap noise is the detergent cup lid hitting the drawer when the dispenser opens
and releases detergent into the drawer during a wash cycle. This is normal.
Proper installation affects the noise level.
Sani-Rinse (select models), High Temp Wash or Sensor Dry (select models) has been
selected and the cycle is extended to heat water.
Rinse aid is not being used and may lengthen dry cycle up to 4 hours.
Check to see that the incoming water temperature is 120° F (49° C).
Run dishes being held in the dishwasher through a Quick Rinse cycle.
Many dishwashers have a "new" smell when first installed. This will dissipate with use.
Dishwasher may not be draining properly. (SeeDishwasher willnot drain section above.)
Fora strong odor, place baking soda in both sides of the detergent cup. Select Quick
Wash cycle and allow the water to circulate for about 10 minutes. Interrupt the cycle by
opening the drawer and let it stand overnight. Restart the dishwasher by closing the
drawer and pressing Start/Resume. Allow it to complete the cycle. Another alternative is
to use a dishwasher cleaning product.
Check that the dishwasher islevel. (Refer to the Installation Instructions.)
Suds can cause the dishwasher to overflow. Measure the detergent carefully and use
only detergents designed for use in a dishwasher. Less detergent is needed in soft
water. Try another brand of detergent if sudsing continues.
Toavoid rinse aid leaking from the dispenser,be surethe plug issecurelyattached (log.10).
Make sure that items do not extend above the inside top edge of the drawer.
If a cycle other than the currently selected cycle pad is pressed after the cycle and
options are locked, the currently running cycle light will flash three times and four
audible beeps will be heard.
The washing, drying and Start/Resume indicator lights will flash if the drawer is
opened mid-cycle. Start/Resume will need to be pressed before the cycle will resume.
Drawer must be closed within 3 seconds after pressing Start/Resume.
Cont.
19
All manuals and user guides at all-guides.com