Kenmore 596.52673200 User manual

ORDER # 12591310
®
Side-by-Side Refrigerator
Use & Care Guide
Refrigerador Deplex
Guia para el Uso y Cuidado
R_frig_rateur & Compartiments Juxtaposes
Guide D'utilisation et D'entretien
596.52672200, 596.52673200, 596.52674200, 596.52679200,
596.50002100, 596.50003100,596.50004100,596.50009100,
596.50012100,596.50013100,596.50014100,596.500191 O0
II1
m
m
-!I
0
r-'
"111
Z
m
12591340 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U S.A www°searsrcom
Sears Canada, tnc, Toronto, Ontario, Canada M5B 2B8 Au Canada, www.sears.ca

Electrical Requirements
_Recognize this symbol as a safety alert indicator
[WARNING ]
To avoid electrical shock which can cause severe personal injury or death, do not cut or remove the round grounding
prong from the plug Refrigerator must be grounded at all times Do not remove warning tag from cord Do not use a two-
prong adaptorr. Do not use an extension cord
Electrical Grounding instructions-This refrigerator is equipped with a three-prong (grounding) plug for protection L-_tt'_-_"i_
against possible shock hazards If you encounter a two-prong receptac e contact a qualified electrician and have
the two-prong wall receptacle replaced with a properly grounded three-prong walt receptacle in accordance with the
National Electrical Code Refrigerator is designed to operate on a separate !03 to 126 volt, 15 amp, 60 cycle line
[DANGER ]
IMPORTANT: Child entrapment and suffocation are not problems of the past Junked or abandoned ___=7_ I
refrigerators are still dangerous--even if they will sit for "just a few days" If you discard an old refrigerator, '! _ _.,__.,i
please fo,iow the instructions beIow to he,p prevent accidents i_i _II
BEFORE YOU TH ROW AWAY YOU R OLD REFRIGERATOR OR FREEZER: 'i_ I I_I
•Take offthe doors. ',!=_ II_
•Leave the shelves in place so children may not easily climb inside.
Maintenance Agreement
We Service What We Sell
Your purchase has added value because you carl depend on Sears HomeCentral® for service With over 12.000 trained
repair specialists and access to over 4 2 million parts and accessores we have the tools, parts, and knowledge and skills
to ensure our pledge: We Service What We Sell.
Sears Maintenance Agreements
Your Kenmore appliance is designed, manufactured and tested to provide years of dependable operation Yet any major
appliance may require service from time to time The Sears Maintenance Agreement offers you an outstanding service
program, affordably priced
The Sears Maintenance Agreement
• Is your way to buy tomorrow's service at today's price
Eliminates repair bills resulting from normal wear and tear
Provides for nontechnical and instructiona! assistance
Even if you don't need repairs, provides an annual Preventative
Maintenance Check, at your request, to ensure that your appliance
is in proper running condition
Some limitations apply. For more information,
call 1-800-361_6665.
For information concerning Sears Canada
Maintenance Agreements, call 1-800-361-666&
Full One Year Warranty on Refrigerator
For one year from the date of purchase, when this refrigerator is operated and maintained according to instructions
attached to or furnished with it, Sears will repair it, free of charge, if defective in material or' workmanship
Full Five Year Warranty on Sealed Refrigeration System
For five years from the date of purchase, when this refrigerator is operated and maintained according to instructions
attached to or furnished with it, Sears will repair the sealed system (consisting of refrigerator, connecting tubing and
compressor motor) free of charge, if defective in material or workmanship
The above warranty coverage applies only to refrigerators which are used for storage of food for private household
purposes It excludes original and replacement Kenmore ice & water filter cartridges (if equipped with the filter system)
Original and replacement cartridges are warranted for 30 days, parts only, against defects of material or workmanship
Warranty service is available by contacting 1-800-4-MY-HOME (t-800-469-5811)
This warranty applies only while this product is in use in the United States
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state
Sears, Roebuck and Co, Dept 817WA, Hoffman Estates, IL 60179
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, , ,
2

Full One Year Warranty on Refrigerator
For one year from the date of purchase, when this refrigerator is operated and maintained according to instructions
attached to or furnished with it, Sears will repair it, free of charge, if defective in material or workmanship
Full Five Year Warranty on Sealed Refrigeration System
For five years from the date of purchase, when this refrigerator is operated and maintained according to instructions
attached to or furnished with it. Sears will repair the sealed system (consisting of refrigerant, evaporator, and condenser)
roe of charge, if defective in material or workmanship
Ten Year Parts Warranty on Compressor
For ten years from the date of purchase, when this refrigerator is operated and maintained according to instructions
attached to or furnished with it, Sears will replace any compressor part, if defective in material or workmanship
The above warranty coverage applies only to refrigerators which are used for storage of food for private household
purposes It excludes original and replacement Kenmore filtered ice & water filter cartridges (if equipped with the filter
system) Original and replacement cartridges are warranted for 30 days, parts only, against defects of material or
workmanship
Warranty service is available by contacting 1-800-4-MY-HOME or (1-800-469-581 t)
Sears Canada, fnc, Toronto, Canada, M5B 2B8
ii lllll ilnnn
Product Record
In the space below record the model and serial numbers and
}urchase date of your refrigerator You will find the model and
serial number sticker inside the unit on the left wail of
refrigerator section
Model Number: 596 .............................
Serial Number:
Purchase Date: ....................................
Keep this booklet and your Sears sales receipt in a
safe place for future reference,
Important
Recognize Safety Symbols, Words, Labels
[DANGER ]
DANGER--Immediate hazards which WILL result in severe personal injury or
death
l_ WARNING 1
WARNING--Hazards or unsafe practices which COULD result in severe personal
injury or death
ICAUTION ]
CAUTION--Hazards or unsafe practices which COULD result in minor personal
injury or product or property damage
Safety Information : :
What You Need to Know
about Safety Instructions
Warning and Important Safety
Instructions appearing in this manual
are not meant to cover alepossible
conditions and situations that may
occur Common sense, caution, and
care must be exercised when installing,
maintaining, or operating refrigerator
Always contact your dealer, distributor,
service agent, or manufacturer about
problems or conditions you do not
understand
I11
Z
O
I"
m
W

Electrical Requirements .................... 2
Maintenance Agreement .............................. 2
Warranty ........................................................... 2
Warranty-Canada ....................................... 3
Product Record ....................................... 3
_mportant Safety Information ........................... 3
Installing Your Refrigerator ............................... 5
How to Transport Your Unit ........................... 5
How to Select the Best Location ............. 5
How to Remove the Doors and Hinges ............ 6
Hew to Install and Remove Handles 6
How to Lever Your Refrigerator' ................. 7
Hew to Connect the Water Supply ..................... 8
How to Adjust the Temperature Contro]s ........... 9
About Your' Fittration System ............. 10
Refrigerator Features .................................... 11
Door Storage ......................................................... 11
Shelves .......................................................... 11
Drawers ........................................................... 11
Freezer Features .............................. 13
Primary Features .................................... 13
Drawers .................................... 13
Door Storage ................................... 13
Shelves ............................................. 13
Dispenser Features ...................................... 14
Water Dispenser Operation ................ 14
Controf Features ......................................... 15
Hints and Care ............................... 19
How to Clean Your Unit ................................ 19
How to Remove and Replace Light Bulbs .... 20
Troubleshooting .............................................. 21
Water Filter Data ............................................. 25
EspaSol .......................................................................................28
Fran_ais ............................................. 53
Service .................................................. Back Cover
4

Installing Your
These instructions were provided to aid you in the installation of your unit Sears cannot be responsible for improper
installation
How to Transport Your Unit
Follow these tips when moving the unit to final location:
NEVER transport unit on its side If an upright position is not possible, lay
unit on its back Allow unit to sit upright for approximately 30 minutes prier
to prugging unit in to assure oil return to the compressor Plugging unit in
immediately may cause damage to internal parts
, Use an appliance doily when moving unit ALWAYS truck unit from its
side-NEVER from its front or back
Protect outside finish of unit during transport by wrapping cabinet in
blankets or inserting padding between the unit and dolly
• Secure unit to dolly firmty with straps or bungee cords Thread straps
through handles when possible DO NOT overtighten Overtightening
restraints may dent or damage outside finish
How to Select the Best Location
Observe these points when choosing the final location for your unit:
DO NOT install refrigerator near oven, radiator, or other heat source tf
that is not possible, shield refrigerator with cabinet material
DO NOT install where temperature falls below 55°F (13°C) Malfunction
may occur at this temperature
Make sure floor is level If floor is not level, shim rear wheels of unit with a
piece of plywood or other shim material
To assure proper door closure, verify that the unit is leveled with a ¼" tilt
to the back
How to Remove and Install Panels
(some models)
Reference the sheet entitled Decorator Door Panel Installation Instructions
shipped on the front of your unit
Refrigerator
How do I measure an opening
to insure proper fit?
This refrigerator was designed to fit a 69" tall
opening to allow for proper ventilation,
leveling, and door adjustments
Please also take into account, when
measuring space for your unit, that some
models require a certain amount of
clearance around it to allow for proper air
flow Proper air flow is key to keep your unit
running a optimum efficiency To determine
measurements, please reference the table
below O
Subflooring or floor coverings (i e carpet, tile, i
wood floors, rugs) may make your opening
smaller than anticipated !
Some clearance may be gained by using the _/_
leveling procedure under "How to Level Your
Refrigerator"
Unit ]oral
Volume
Less Than 23
CU.ft.
Greater
Than 23 cu. ft.
Recommende(1
Clearance
Top Sides Rear
N/A NiA NiA
9_'" NtA %2"
IMPORTANT: If unit is to be installed into a
recess where top of unit is completely
covered, use dimensions from floor to top of
hinge cap to verify proper clearance

Inst Jling Your Refrigerator
How to Remove the Doors and Hinges
I _k, WARNING
To avoid severe personal injury or death, observe the following:
• Disconnect power to refrigerator before removing doors Connect power onty after [eplacing doors
•Green ground wire must be attached to top hinge while performing door removal and replacement
• Tape decorative panels (some models) securely into place before [emoving door handles
[ CAUTION
To avoid property damage, observe the following:
• Protect soft vinyl or other flooring with cardboard, rugs, or other protective material, prior to moving refrigerator
•To avoid damage or breakage to adjusting bolt, do not use power tools to correct leveling
•DO NOT adjust unit to be any shorter than 68 ½" inches tall (minus hinge and cap) Doing so may damage underside
components
bo.o='.go°over,+ I
OpenbothdoorsI_0°,or'as "_I |
,_, wide as possible, to remove ,a_ J
I
I
Remove top hinges along
with doors.
Close doo_so Unscrew s/_6"hex
head screws £rom top tu'ages.
DO NOT remove either green ground
wire or wire connecting center screw
Remove bottom hinges with a
3/n"hex head driver.
How to Replace the Doors
• To replace doors, follow the steps in How to 1
Remove the Doors and Hinges in reverse orderl )
How to Install and Remove Handles
Installing Front-Mounted Handles
If installing handles for' the first time, the flesh fbod handles can be located within the fresh food section Ihe handle trim will
be located in the literature pack
and bottom sets of door clips, _ _ of handles and retainers on
and slide down until screw _ _ bottom of door.
holes oa bottom o£ handles _ •
match with door screw hales. _l .

Installing Your Refrigerator
How to Install and Remove Handles :ontinued
Removing Front-Mounted Handles
Removing handles may be necessary when tt'ansporfing unit through tight spaces
i
(4 R_o_e bo.omWrao_ oS 1I Iltf h (2 R_o_e _o _a_dle_se
syen out to rdease _om tmit_
lIMPORTANT: Wrap blade of screwdriver I | 1 FIt £1_y be t:ig!!L
L w!!hmask!ngt_Pe!oa_oidd_?ag!ngunit j
Removing Full-Length Extruded Handles
Removing handles may be necessary when transporting unit through tiNlt spaces, or installing or replacing decorative panels,
I WARNING I
To avoid possible injury and damage to property, tape decorative panels (some models) securely into place before
removing door handles,
replacement
Install Full-Length Extruded Handles
dis into notches
I" 9 _*r' I "_" "
and slide handle
d,o_ tmtil it contacts bottom tri_
Repeat instructions to install other handle .,,
Ill
How to Level Your Refrigerator
Materials Needed
•tf_ hex head driver • Level
II R_ove toe grille and bottom hinge covers !
(see previous instruaions)° J
i
_Tur. both front adjustmeat scr_s _----_-)
(A) clockwise to raise and _ _ _ |
counterc]odmrise to Iower. ,_' /"_ _tt j !
_Check with level to verify _/4"tilt to the )
_ck Forproper door closure. J
•If unit is aligned and stable, replace toe grille
.... and hinge covers
5IS required, correct rocking of unit by
turning rear adjustment screw clockwise
to raise _ocking corner.
IS doors are uneveta...
Determine which door needs to be raised
Turn front rotler adjustment
screw clockwise to raise
front corner of door
If the unit has reached the
limit of its adjustment range. ,,_@,_-_,
and doors are still not level- o
lower opposite door by turning roller
adjustment screw counterclockwise
Check with [eve[to verify ¼" tilt to the back for proper
door closure
If unit is aligned and stable, replace toe grille and
hinge covers

Installing Your Refrigerator
How to Connect the Water Supply
IWARNING I
To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before
connecting water supply After connecting water supply, connect power
[ CAUTION ]
To avoid property damage, observe the following:
• Consult a plumber to connect copper tubing to household plumbing to assure compliance with !oca! codes and
ordinances
•Confirm water pressure to water valve is between 20 and 100 pounds per square inch If water filter is installed, water
pressure to water valve must be a minimum of 35 pounds per square inch
• DO NOT use a self-piercing, or 3/m" (48 mm) saddle valve Both reduce water flow. become clogged with time, and may
cause leaks if repair is attempted
•Tighten nuts by hand to prevent cross threading Finish tightening nuts with pliers and wrenches Do not overtighten
•Wait 24 hours before placing unit into final position to check and correct any water leaks
Matedals Needed
•!/+. (6 mm) outer diameter flexible
copper tubing
• Brass nut and sleeve (see
literature pack)
•Shut-off valve (requires a 1/,I"or 6
mm hole to be drilled into water
supply before valve attachment)
•Adjustable wrench
I1 Create service loop with tubing using care to
avoid khzks in tubing,
NOTE: Add 8' (2 m) to tubing length needed to reach
water supply for creation of service loop
II
cap [ram water valve inlet
3__ endPlacebrass nut and sleeve on copper tube _|
"-N
as illustrated+
r,
Place end of oopper tubing into water valve inlet
[epart. Shape tufting slightly-DO NOT KZNK-so
Ltha ttubing feeds straight into inlet port :W
_5 Hde brass nut over sleeve and screw nut into inlet
port. Tighten nut with wrench. Pull on tubing to
con_rna connection is secure.
IMPORTANT: DO NOT overtighten Cross threading may occur,
Locate water tubing damp and instatl with _"hez
head screw, as JilusttatecL Turn on water sut_y
and correct any leaks, i£ present°
F7 Moaitar water connection fnr 24 hours. Cetzect leaks, i£
L" neceSSarTo )

Installing Your Refrigerator
How to Adjust the Temperature Controls
This refrigerator is designed to operate at a household temperature of 55° to 110°F (13° to 43° C)
Dial Temperature Control Models
For initial temperature setting, follow all five steps listed below If doing a simple
temperature modification for an operational unit, only steps 3 through 5 are required
i3Check to see if freezer
temtx_ature is 0 ° to 2° F (-17 °
Locate refrigerator and
freezer controls on upper
leftwall of refrigerator
section, and set both
_tr_s to 3½.
IMPORTANT: Neither section
will cool if freezer control is
set to Off
%,#
to -16° C).
Turn contro! to next highest
number if too warm
Turn control to next lowest number
if too cold
Allow 5 to 8 hours for adjustments
to take effect
4"
Check to see that refrigerator
sec°do_ is 38 ° to 40° F (3 °to
4°C).
Turn control to next highest
number if too warm
Turn control to next lowest number
if too cold
Allow 5 to 8 hours for adjustments
to take effect
• n ecessa I?y.
I2 Allow 24 hours for 1
tednt_ratuzes to stabi]ize. J
How do I perform a
temperature test ____,k_/l_,,
with my di,_ If-]//t
temperature
controls?
IMPORTANT: These instructions
apply to dial temperature controls
only Electronic control models Ill|
constantly monitor unit
temperature on the controls
Materials needed
2thermometers measuring -5 °
to 50°F (-2; ° to 10°o)
2 drinking glasses i
For Freezer _1_
Place thermometer in glass of
vegetable oil in middle
of freezer and continue
with step 3 of How to Adjust
the Temperature Controls
section
IMPORTANT: Due to design of
unit, always start temperature
adjustments with freezer section
For Refrigerator
Place thermometer in glass of
water in middle of unit and
continue with step 3 of How to
Adjust the Temperature
Controls section
Electronic Temperature Control Models
,'['o set t_ature of the freezer, use the "_" buttogas next to the
@button° A setting of 0 °to 2°F (-17 °to -16 ° C) is recommended.
Use the X button to raise the temperature of the freezer section, or the y. to
lower it
Press the _ button to confirm the settings
lilllliiiiliiilliiillllliii i lit i1_
"2 To set the t_ature of the fresh food section, use the "_"v
i
buttons n_xt to the _] button. A setting of .38 °to 40 °F
(3° to 4° (7) is reomm=nded.
Use the/., button to raise the temperature of the fresh food section, or the v
to lower it
I3 Allow 24 hours for _atures to stabilize.
NOTE: if adjusting the temperature of an operational unit. only 5 to 8 hours is
required for temperatures to take effect
9
Press the I._%_ button to confirm the settings ]
Why do the
temperatures on my
LED display
fluctuate after they
have been set?
The compartment temperatures
may vary slightly as the unit cycles
to maintain the set temperatures

About Your Filtration System...
Water Filter Removal and Installation
[ _ WARNING j
To avoid serious illness or death, do not use unit where water' is unsafe or of unknown quNity without adequate
disinfection before or after use of filter
[ cAUnON 1
•Bypass cartridge DOES NOT filter water Be sure to have replacement cartridge available when filter change is required
• If water filtration system has been allowed to freeze, replace filter cartridge
• if system has not been used for several months, and water has an unpleasant taste or odor, flush system by dispensing
2-3 glasses of water if unpleasant taste or odor persists, change filter cartridge
When do Idlange the
water filter?
The dispenser features a water
filter change indicator For
instructions on how to operate and
reset this feature, refer to the
Dispenser Features section
IMPORTANT: Condition of water
and amount used determines life
span of water' filter cartridge if
water use is high, or if water is of
poor quality, replacement may need
to take place more often
How do I order a
replacement filter
cartridge?
Kenmore _' replacement water filter
cartridge model 9005
is available through Sears dealers
and servicers You may also order
through Sears by using the
information on the back cover
I'm trying to dispense
water to flush the 66
system. Where's
the water?
During initial use, allow about a 1 to
2 minute delay in water dispersal to
allow internal water tank to fill
What if I choose not to
use the water filtration
system?
Dispenser feature may be used
without water filter cartridge if you
choose this option, replace fitter
with blue bypass cap
Initial Install of Water Filter
,,,,H,H,n=,,,nm,n H=,=, , == n=
fZ Remove sealing label from J
Ia1 =b d. \
I " Rotate gently cbckwise until filter stops "--_._" 'tl
Land snap filter cover closed "_ _ ,_
Reduce water spurts by flustdng air from
system Run water continuously for 2
minutes tltrough dislx_Ser until w_ter runs
stea dy.
• Additional flushing may be required in some households
_, where water' is of poor quality. ,_
Replacing Water Filter
IMPORTANT: Air trapped in system may cause water and
cartridge to eject Use caution when removing
rlTw:n Biter counterclockwise undl it releases l
:,from _lter head.
2 Dtain from £dter into and
--t_ Wipe up excess water in Iilter o_rer and
IJ condnue wi8 Imtiai Install of Water J
l
Filter, steps 2and 3,
10

[ CAUTION j
To avoid property damage or injury, observe the following:
• Cenfin'n shelf is secure before placing items on shelf
• Handle tempered glass shelves carefully Shelves may
break suddenly "rfnicked, scratched, or exposed to sudden
temperature change
i i
Door Storage
nl i i iii
FMilk Savor TM (some models)
The temperature-controlled Milk Savor TM
keeps beverages and ether items up to 5° F
(3° C) colder than the rest of the fresh food
section Air inlet allows air from the freezer
section to pass to Milk Savor TM
The Milk Savor TM control is located
on the left wall of fresh food section
Control adjusts amount of air circulating in
Milk Savor TM Turn control clockwise for colder
temperature
To remove and install Milk Savor TM"
If located directly above Milk
SavorT_,%dairy center or door _=_'tl
bucket may need to be removed I I_ I IJ
Refer to appropriate instructions I_1
and remove item Slide Milk SavorT_I
assembly up and pull straight out -_
To install, align one of the
Milk Savor' cold air intake _c:::_lll ]
holes (A)with one of the two /,_ _,4_{}H.B
air inlets (B) in door liner ACq_E=_I {H{{l
Push assembly down onto "_Eq]l=_lijl t
door liner retainer until it stops _" _"_l'_l]t ]
IMPORTANT: Milk Savor TM wil! not operate properly if
air intake holes are not aligned with air inlet in door
Iiner
Dairy Center
The dairy center provides convenient storage for items
such as butter, yogurt, cheese, etc
This compartment is an adjustable feature located in
the door It can be moved to several different locations
to accommodate storage needs
To remove and install bin: _% _ !
•To remove, slide dairy center up
and pull out
To install, slide assembly in /_/_
above desired door liner
retainer and push down until it
stops
To remove and install dairy door:
To remove, press in sides of dairy door and pull out.
To install, slide sides of dairy door inside dairy
center until hinge points snap into place
Refrigerator Features
Door Storage
"Tilt-Out Door Buckets (some models)
The Tiit-Out Bucket assembly consists of a bucket and frame,
providing adjustable, convenient storage for food items in door
The bucket assembly tilLsforward for easy access of items, and
lifts out for ease in cleaning and adjusting
To remove and install bucket:
Toremove bucket, tip bucket forward
and pull straight out to remove
To instail bucket, slide bucket into bucket
frame and push bucket upright
To adjust bucket frame: ",.Y_&|l tin
•Remove bucket per above instructions
• Lift frame off door support and place in
,. desired door location
Door Buckets
Door buckets adjust to meet individual
storage needs
To remove and install buckets:
Liftthe door bucket up until it clears the
retainers on the door liner, then pull the door
bucket straight out
To install,sfide bucket in above desired door
liner retainer and push down until bucket stops
Shelves
Spillproof Shelves
Spillp_of stationary shelves hold
simple spills for easier cleaning
Toremove and install shelves:
To remove shelves, lift front of shelf to
release shelf hooks from metal track
and pullout to remove
To instal! shelves, select point in metal track for replacement
and insert shelf hooks. Raise front of shelf until hooks lock
into place Lower shelf front,
Drawers
ill llll iiil,llUl, ill ,,,IH
F
Snack Drawer __1_
This drawer can be used for storage of
food items or extra produce
To remove and install snack drawer:
To remove, putldrawer out tofull
extension Tilt up front of drawer and
pul{straight out
To install, reverse above procedure
11

Refrigerator Features
What setting should I use for items in
my temperature-controlled drawer?
You should not store lettuce or other leafy produce in this
drawer
•cauliflower •steaks
COLD .cucumbers COLDEST .hard cheeses
•zucchini •cold cuts
•apples •bacon
• corn •hot dogs
• oranges
• grapes
What setting should I use for items in
my humidity-controlled drawers?
•cauliflower -oranges •grapes
LOW •apples * zucchini
•corn
HIGH • cucumbers -cabbage •fresh
-lettuce -celery sprouts
•asparagus •broccoli *fresh herbs
• spinach
What can Ido to prolong the life of my
produce?
P_ease observe the following rules when storing produce in
humidity-controlled crispers:
DO NOT wash produce before placing in crispers Any
additional moisture added to the crispers may cause
produce to prematurely spoil
DO NOT line crispers with paper towels Towels will
retain moisture
Follow control instructions carefully Incorrect control
settings may damage produce
Drawers
Temperature-Controlled Meat
Drawer
The temperature-controlled meat drawer provides a drawer
with a variable temperature control that keeps the
compartment up to 5°F (3°C) colder than refrigerator
temperature This drawer can be used for deli storage or
additional produce storage
NOTE: Cold air directed to the temperature-controlled
meat drawer can lower refrigerator temperature
Refrigerator control may need to be adjusted
Controls
Located on the wall to the left of the drawer the climate
controls regulate the air temperature in the temperature-
controlled meat drawer Set control level to cold to provide
normal refrigerator temperature for non-leafy produce
Use the coldest setting for meats or other
deli items
To remove and install drawer:
To remove pull drawer out
to fuii extension Tilt up front of
drawer and pull straight out
To install, guide drawer into
frame and push back until drawer
is flush with rear wall
Humidity-Controlled Crisper
The humidity-controlled crisper keeps produce fresh
longer by providing an environment with adjustable
humidity
Controls
The humidity_controHed crisper controls regulate the
amount of humidity in the crisper drawer Use the low
setting for nonqeafy produce Use the high setting for leafy
produce
To remove and install drawer:
•To remove, pulFdrawer out
to full extension Tilt up front of
drawer and pull straight out
• To install, guide drawer into
frame and push back until drawer
is flush with rear wall
To remove and install shelf:
. To remove, lift shelf from wall supports
SJ_".U
To install shelf, lower shelf onto wall supports and
push in until shelf is flush with rear wall J
12

Freezer Features
! CAUTION I
To avoid properly damage, observe the following:
• Do not force ice maker arm down or up
• Do not place or stere anything in ice storage bin
[WARNING ]
To avoid possible injury, including death, do not place glass
items in ice cream shelf Glass objects may shatter or
explode if exposed to extreme cold
Primary Features
r •
Automatic Dispensing Ice Maker
This ice maker creates the ice used in the dispensing
system
Using Ice Maker for the First Time
• Confirm ice bin is in place
and ice maker arm is down
•After freezer section reaches
between 0 ° to 2°F (-18 ° to
-17 ° C) ice maker fills with
water and begins operating
QAllow approximately 24 hours after installation to
receive first harvest of ice
Discard ice created within first 12 hours of operation to
verify system is flushed of impurities
Operating Instructions
Confirm ice bin is in place and ice maker arm is down
, After freezer section reaches 0° to 2°F (-18" to -!7 ° C),
ice maker fills with water and
begins operating You will have a
complete harvest of ice
approximately every 3 hours
Stop ice production by raising ice
maker arm until click is heard
Ice maker will remain in the off position until arm is
pushed down
Drawers
gce Cream Shelf
Ice cream shelf provides a space for items to be
chilled or frozen quickly
, To remove, lift ice cream shelf
from ice bin rails and pull
straight out
. To install, fit shelf over top of
ice maker and lower onto ice
bucket rails
Storage Bin
The ice storage bin is located below the automatic
dispensing ice maker
To remove and install ice storage bin:
• To remove bin, remove ice cream shelf
Raise ice maker arm to deactivate ice
maker Lift front of bin and pull out
to its full extension Lift up front of
bin and remove
.To install, slide bin into rails below ice maker until bin
locks into place Drop ice maker arm to activate ice
maker, and replace ice cream shelf
IMPORTANT: Ice bin must be
locked in proper place for proper _/_'_
ice dispensing If freezer door
does not close, bin is not in proper
location Turn auger driver counterclockwise (as shown)
to properly align ice bin with back of unit
i m
Shellves
Freezer Shelf
To remove and install clip-mounted shelves:
,A
To remove, pull shelf from wall ____
mounting clips and pull left side
of shelf out of wall mounting
holes
To install, place shelf in mounting hole and attach to
wall mounting clips
To remove and install rail-mourl
To remove snap right side of
shelf from cabinet railing and
remove from wall mounting
clips
To install, replace shelf in
wall mounting clips Be sure back edge of shelf is
flush with back of cabinet and snap shelf into cabinet
railing
Door Storage i ii i iii iiii i i iiii iii
Door Buckets
t Refer to refrigerator section for instructions J
t.3

Dispenser Features
Dispenser Light ,_o/s/Jo,,,,,
A light activates within the dispenser area at full power when dispensing ice or water
Dispenser Pad
The dispenser pad is located on the back wall of the dispensing area When the dispenser
pad is pressed, the selection chosen on your dispenser control panel will dispense
Removable Tray
The removable tray at the bottom of the dispenser area is designed to collect small spills
and may be easily removed for cleaning and emptying purposes
IMPORTANT: Removable tray does not drain Continuous water running into tray will cause tray to overflow
Water Dispenser Operation
[CAUTION I
To avoid personal injury or property damage observe following instructions:
.Do not put fingers_ hands, or any foreign object into dispenser opening
•Do not use sharp objects to break ice
• Do not dispense ice directly into thin glass, fine china, or delicate crystal
NOTE: During initial use of water dispenser, there will be a 1 to 2 minute delay while water tank
fiIIs before water dispenses Discar_dfirst 10-14 containers of water after initially connecting
refrigerator to household water supply and after extended periods of nonuse
To use dispenser pad:
. Choose water selection flora dispenser control panel
Press sturdy, wide-mouthed container against dispenser pad When dispensing crushed ice.
ho!d container as c!0se to chute as possible to reduce spraying
Release pressure on dispenser pad to stop water' from dispensing A small amount of water
may continue to dispense, and collect in dispenser tray Large spills should be wiped dry
14

Five-Button Contron Features
Dispenser Features
ooo00
SgN_
FILTER DISPENSER FILTENND ICE & WATER LIGHT
J
Dispenser Operation _
To dispense:
Select CUBE, CRUSH, or WATER mode by pushing button on dispenser controt panel A green indicator light above
button shows mode selection
Press container against dispenser pad Selection mode may not be changed while ice dispenser is in operation°
NOTE: If water dispenser is continuously active for more than 5 mimJtes, an automatic lock out sensor will shut down
power to dispenser area For instructions on how to unlock your dispenser, see the section entitled "Dispenser Lock"
below
w
Dispenser Lock
This feature prevents ice or water from being dispensed
To lock and unlock dispenser:
To lock dispenser, press and hotd LOCK/UNLOCK button for 3 seconds A green indicator light above button confirms
dispenser is locked
To unlock dispenser, hold LOCK/UNLOCK button for 3 seconds Green indicator iight above button will go out
..................... i
r" Filter Status indicator Light
The filter status indicator light serves as a reminder to replace the water filter A green light indicates that the
filter is in good condition A red light indicates the filter should be changed Once light turns red, it wilf remain
red until function is reset _:_ Good
Cha_go
FILTER
To reset indicator:
Press and hold both LOCK/UNLOCK and WATER buttons simultaneously for 4 seconds The green filter
status indicator light wilt flash 3 times when the function has successfully reset
i iiilU iiii I II,HIIIINHH
Auto Light
The auto light function offers the ability to activate the dispenser light at half-power when the
LIGHT SENSOR detects that the light levels in room are low
To activate and deactivate auto light:
To activate, press ONIOFF button located on control panel A green
indicator fight above button displays to show that sensor is active
To deactivate, press ONIOFF button Green indicator light wilt go out
--O ....
LIG_fT
NOTE: Dispenser light will operate whether
or not auto light is selected
,, ,,,, ,, ,,,,,,,,,,,,,,
Sabbath Mode @ +
This mode is intended to deactivate power to the LED and dispenser lights, while allowing the
controls to remain operational
To activate and deactivate Sabbath Mode:
To activate, press and hold both LOCK/UNLOCK and ONIOFF buttons
simultaneously for 3 to 4 seconds After 3 to 4 seconds, the LED and dispenser
lights will turn off Dispenser light will not activate during dispensing while in
this mode,
To deactivate, press and hold both LOCKIUNLOCK and ONIOFF buttons simultaneously for
3 to 4 seconds After 3 to 4 seconds, the LED and dispenser lights wilt activate
Hii i i ii HH,,HHHH,,HHHHHH',H,,HHH,,HI --,d
15
NOTE: In the event that power is
interrupted while the Sabbath Mode
is active, the control will remain in
Sabbath Mode when power returns

Dispenser Features
Electronic Control Features
OFF
ON
A
DISPENSER LIGHT
Dispenser Operation
To dispense water: To dispense ice:
Select the button, Select the button for cubed ice
Press container against •Press the _ button for crushed ice
dispenser pad Press container_ against dispenser pad
NOTE: if water dispenser is continuously active
for more than 2 minutes, an automatic lockout
sensor will shut down power todispenser area
For instructions on hew to uniock your dispenser,
see the section entitled "Dispenser Lock" below ,_
Dispenser Lock
Light Function _UG"T
The light function offers offers two settings: OFF and AUTO NOTE: Dispenser lightwil_operate at fuff power [-o_F_l
The OFF setting will turn off the dispenser cavity light when ice or water functions are in use v C_.)_'._
The AUTO setting allows the SENSOR to measure the surrounding tight levels and adjust the power of the cavity light
accordingly When the senser registers lower light leveis (night time, darkened kitchen), the cavity tight wilt respond at
50% power When the senser registers high light levefs (lighted kitchen, direct sunlight)_ the cavity light will not activate.
ro activate auto setting:
Press the _ button located on contro_nel
. To activate the AUTO setting, press the _ button
When the green indicator light above the button display
is on, the cavity dispenser light will use the AUTO setting
To deactivate light;
Press the _ button located on control panel Green
V
indicator tight above button will go out
i
i
rFilter Status indicator Light FILTER
| The filter status indicator light serves as a reminder to reptace the water fi(ter, A green light indicates that the GOODC,
| filter is in good condition. A red Iight indicates the filter should be changed Once light turns red, it will remain C.A.GEO
red untif function is reset
/ To reset indicator:
Press and hold both the _ and the L_,*_ buttons simultaneously for 4 seconds The filter status indicator
green
L, light will flash 3 times when the function has successfully reset
Iemperature Keys
These keys will lower or raise the freezer or fresh food
compartment temperature
NOTE: See the section How to Adjust the Temperature
Contro|s for instructions on how toset food compartment
temperatures i i
16

Dispenser Features
Electronic Control Features _o_._a
MAX TENET V
LIGHT
@SE_SQR
m
NOTE: The temperature setting cannot be p
changed if Max Coo! or Max Freeze II
IIIlllli
,,, ,, , ,, ,,, ,,,,, ,,,,,,,,,,,,,,,,,,,,H,,, I I
rMax Freeze
This function causes the freezer temperature to drop to the minimum freezer
temperature setting available This setting remains in effect for approximately 24
hours
To activate and deactivate Max Freeze:
To activate, press the _ button The green light above the button wili indicate
active status
To deactivate, press the _ button The green light above the button will go out
HII ii iiirll i ii i i i,nn iiiiiiii i nnnuHnn,l,,,Hi Hml ii
NOTE: Thetemperature setting cannot
be changed if Max Coot or Max Freeze
setting isactive
Iacation Mode
This key, if enabled, causes less frequent defrost cycles This conserves energy
To activate and deactivate Vacation Mode:
To activate, press the _ button The green light above the button will indicate
active status
deactivate, press the @ button, or open either refrigerator
To door
6
Press the _ button
i7

Dispenser Features
Hidden Electronic Control Features
This mode is intended to deactivate power to the LED and dispenser lights, while allowing the -Jr"
controls to remain operational No visual or audio alarms will be available while in this mode
To activate and deactivate Sabbath Mode:
To activate, press and hold both the _ and _,,,_., buttons simultaneously for 3
seconds After 3 seconds, the LED and dispenser lights will turn off Dispenser light
will not activate during dispensing while in this mode,
To deactivate press and held both .... and buttons simultaneously for 3
seconds After 3 seconds, the LED and dispenser lights will activate
rAuto Display
The auto display controls the illumination of the LED display based on the light readings received from the SENSOR If
the SENSOR indicates low dight leves the display wiII be dimmer than if displaying during well-lit periods
To set the power level of the display:
.Press and hold both the [o.,o.,Jbutton and the freezer y button for' 3 seconds The current active state will show in the
display by using AL O for on, AL A for auto
z-,, NOTE:The letters AL will always show in freezer
Use the refrigerator ...... button to scroll through the display states temperature display while in this mode,
• Activate the chosen setting by pressing the _ button
NOTE: tn the event that power
is interrupted whiie the Sabbath
Mode is active, the control will
remain in Sabbath Mode when
power returns
i nn iI t
Temperature Conversion Mode C ]
°F
This mode is available to change the temperature display between Fahrenheit and Celsius
To change current temperature reading: o
Press the @ and _, buttons simultaneously for 3 seconds
IHidden Lockout for Upper Keypad
The purpose of this mode is to prevent tampering with the upper set of dispenser controls _ _
This includes the Display On/Off, Max Freeze, Max Cool, Vacation Mode, and Temperature Set I_] Jr I_'F_ I
functions _
To activate and deactivate Hidden Dispenser Lockout:
° To activate, press the @ and @ buttons simultaneously for 3 seconds
• To deactivate, press the @ and @ buttons simultaneously for 3 seconds
ON/OFF Function tWARNING
The ON/OFF function turns off cooling to the fresh food and
freezer sections while al{owing the lights and electronic To avoid electrical shock which can cause severe personal
display to stay on The dispenser functions will not be injury or death, do not perform maintenance or service on
available while in this mode refrigerator unless unit is unplugged,
To deactivate and activate unit:
To deactivate, press the freezer _ button until the readout registers
beyond the maximum allowable freezer temperature At this point, the
LED will read OFF Press the _ button to confirm the selection
To reactivate, press the freezer v button Press the _ button to
confirm the sefection
NOTE: After reactivation, the display will
show temperature setting previousIy in
use See the section How to Adjust the
Temperature Controls for instructions
on how to set food compartment
temperatures,
18

@ oO
How to Clean Your Unit
]WARNING ]
TO avoidelectricalshock which can cause severe personalinjuryOF death,
disconnectpower to refrigeratorbeforecleaningAftercleaning,connect power
[ A CAUTION ]
To avoid personal injury or property damage:
•Read and follow manufacturer's directions for all cleaning products
. Do not place buckets, shelves, or accessories in dishwasher Cracking or
warping of accessories may result
AREA
Textured Doors
and Exterior
Cabinet Interior
Stainless Steel Doors
and Exterior _
IMPORTANT;
Damage to stainless steel
finish due to improper use
of cleaning products or
nomrecoromended
products is not covered
under any warranty
Dispenser Controls
DoorGaskets
Condenser Coil Rcmmv
me grilI_ h} d_ c_'_,_
Condenser Fan Outlet
Grille
S_'¢h_..kql'! _:/iig_'ramr
Accessories _heh.c_"
DONOT USE
Abrasive or harsh cleaners
Ammonia
Chforine bleach
Concentrated detergenls or
solvents
Metal or plaslic*textured
scouringpads
Abrasiveor harshcleaners
Ammonia
Ch!odnebieach
Concentrated detergentsor
solvents
Metalor plastic-textured
scouring pads
Vinegar-based product
Citrus-basedcleaners
? Abrasiveor harshcleaners
?Ammonia
! Chlorinebleach
Concentrated detergentsor
solvents
! Metal or plastic-textured
scouring pads
'! Abrasive or harsh cleaners
tMetal or pIastic4extured
scouring pads
N/A
? A Distlwasher
DO...
? Use 4tablespoons of
baking soda dissolved in 1
quart (1 liter) warm soapy
water
?Rinse surfaces with clean
warm wa_er and dry
immediately to avoid water
spots
? Use warm, soapy water and
a soft, dean cloth or
sponge
Rinse surfaces with clean
warm water and dry
immediately to avoid water
spots
? Use a vacuum cleaner hose
nozzle
? Use a vacuum c_eaner hose
nozzle with brush
attachment.
'_ Follow removal and
instaIlation instructions from
appropriate feature section
Allow items to adiust to
room temperature
tDitute mild detergent and
use a soft clean cloth or
sponge for cleaning
,) Use a plastic bristle brush
to get into crevices
! Rinse surfaces with clean
warm mater
? Dry glass and clear items
immediateiy to avoid spots
Hints and Care
How do ]remove _ /7"
refrigerator?
1 Remove all food
2 Disconnect power from refrigerator
3 Clean the following items using the
appropriate instructions in How to
Clean Your Unit :
• Walls, floor, and ceiling of cabinet
interior
• Drawers. shelves, and gaskets
4 Pay special attention to all crevices
by completing the following steps:
• Dilute mild detergent and brash
solution into crevices using a
plastic bristle brush.
• Let stand for 5 minutes
• Rinse surfaces with warm water
Dry surfaces with a soft, clean _/_
cloth
5 Wash and dry all bottles.
containers, and jars Discard
spoiled or expired items
6 Wrap or store odor-causing foods in
tightly-sealed containers to prevent
reoccurring odors
7 Connect power to refrigerator and
return food to unit
8 After 24 hours, check if odor has
been eliminated
If odor is still present
1 Remove drawers and place on top
shelf of refrigerator
2 Pack refrigerator and freezer
sections-including doors-with
crumpled sheets of black and white
newspaper
3, Place charcoal briquettes randomly
on crumpled newspaper in both
freezer and refrigerator
compartments
4 Close doors and let stand 24_48
hours
5 Repeat steps 5 through 7
if odor was not eliminated, contact
Sears Service Center Refer to back of
manual for phone number
* A stainless steel cleaner has been includedinside the refrigerator for your use To purchase
additional cleaner,please contact Sears using the information on the back of your manual
19

Hints and Care
How to Get the
Most Out of
Your Energy
Dollar
•Avoid overcrowding refrigerator
shelves This reduces effectivity of
air circulation around food and
causes refrigerator to run longer
•Avoid adding too much warm food
to unit at one time This overloads
compartments and slows rate of
cooling
, Do not use aluminum foil, wax
paper, or paper' towering as shelf
liners This decreases air flow and
causes unit to run less efficiently
• A freezer that is 2/3full runs most
efficiently
• Locate refrigerator in coolest part of
room Avoid areas of direct sunlight,
or near heating ducts, registers, or
other heat producing appliances If
this is not possible, isolate exterior
by using asection of cabinet or an
added layer of insulation
•Refer to this Use and Care Guide
section on temperature controls for
recommended control settings
•Clean door gaskets every three
months according to this Use and
Care Guide's cleaning instructions
This will assure that door seals
properly and unit runs efficiently
•Take time to organize items in
refrigerator to reduce time that door
is open
• Be sure your doors are closing
securely by leveling unit as
instructed in this Use and Care
Guide
• Clean condenser coils as indicated
in the Use and Care Guide every 3
months This will increase energy
efficiency and cooling performance
How to Remove and Replace Light Bulbs
[WARNING
To avoid electrical shock which can cause severe personal injury or death,
disconnect power to refrigerator before replacing light bulb After replacing light
bulb, connect power
[ CAUTION ]
To avoid personal injury or property damage, observe the following:
• Allow light bulb to coo!
• Wear gloves when replacing light bulb
I Upper refrigerator section
1 Locate finger gaps on each side of clear light
shield Insert fingers and press in on each side _._l_J_
of shield Pull shield down and remove
2 Remove light bulbs
3 Replace with appliance bulbs no greater than
40 watts.
4 Replace light bulb cover by inserting front tabs of (r'v y't-1
light shield into slots directly in front of light assembly
ml HHmm HHmHHH I I#
Lower refrigerator section
1 Pinch bottom tabs (,4) on light cover and pull straight
out
2 Remove light bulb
3 Replace bulb with appliance bulb no greater than 40
watts,
4 Insert top tabs (/3) of light cover into liner slots and
snap bottom portion over light assembly A
Freezer section
1 Remove ice bin by lifting front of bin and pulling out
2 Remove light bulb cover by pinching top tab (,4) and
pulling cover out
3 Remove light bulb Replace with appliance bulb
no greater than 40 watts.
4
5
A
Insert bottom tab (B) of light cover into liner slots and snap B
top portion over light assembly
Replace ice bin by sliding in until bin locks into place
ice and water dispenser _1
1 Locate light bulb inside top edge of dispenser frame Unscrew _ /
to remove _ /
2 Replace light bulb with a 7-watt, 120 volt bulb "t.....J J
i
20