Kenroy Home MARIAH User manual

USE AND CARE GUIDE
MARIAH FLOOR LAMP-#33129
Questions, problems, missing parts? Before returning to the store,
call Kenroy Home Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
904-642-4340
THANK YOU
We appreciate the trust and confidence you have placed in Kenroy Home through the purchase of this lamp.
We strive to continually create quality products designed to enhance your home.
Thank you for choosing us!

Table of Contents
Safety Information ....................................................................................................................................... 2
Warranty ...................................................................................................................................................... 2
Pre-Installation ............................................................................................................................................ 3
Planning Installation ............................................................................................................................. 3
Package Contents .................................................................................................................................. 3
Assembly ..............................................................................................................................................4, 5, 6
Care and Cleaning ....................................................................................................................................... 7
Troubleshooting ........................................................................................................................................... 7
Safety Information
Consult a qualified electrician with any
electrical questions you may have.
Warranty
1-YEAR LIMITED WARRANTY
WHAT IS COVERED
The manufacturer warrants this lamp to be free from defects in the materials and workmanship for a period of
one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to
products used in normal use. If this product is found to be defective, the manufacturer's only obligation, and
your exclusive remedy, is the repair or replacement of the product at the manufacturer's discretion, provided
that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or
mishandling. This warranty shall not apply to any product that is found to have been improperly installed,
assembled, or used in any way not in accordance with the instructions supplied with the product. This
warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,
alteration, faulty installation, or any other failure not relating to faulty material or workmanship.
WHAT IS NOT COVERED
This warranty shall not apply to the finish on any portion of the product due to weathering, as this is
considered normal wear. The manufacturer does not warrant and specifically disclaims any warranty, whether
expressed or implied, other than the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or damage, including but not limited
to, any labor or expense costs involved in the replacement or repair of the product.
Contact the Customer Service Team at 904-642-4340.
IMPORTANT: Inspect the wire insulation for
any cuts, abrasions, or exposed copper that may
have occurred during shipping. If there is a
defect in the wire, do not continue the assembly
process. Please call our Customer Service Team
at 904-642-4340.
2

Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet
or cardboard. Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
NOTE: This lamp requires the use of one 120V, 60HZ, 150-Watt max,
medium-base type A 3-way bulb (not included).
Do not exceed the recommended wattage.
PACKAGE CONTENTS
A
B1
D
Finial
Rubber washer
Harp
CShade
1
1
1
Part Description Quantity
G3
FUpper pole 3
H
Lower pole
1
Part Description Quantity
ESocket assembly 1ISet screw 3
A
B
C
D
E
F
G
H
I
J
3
Base
JAllen wrench 1

Assembly instructions
1. Unpack the lamp and assemble
the upper poles
2. Assemble the lower poles & base
Carefully organize and place all parts on
a smooth, flat surface. line up all of the
parts according to the assembly diagram.
Screw three upper poles (F) to bottom of
the socket assembly (E).
Screw three lower poles (G) to bottom of
three upper poles (F).
Pull the excess power cord through base (H).
Place the base (H) to bottom of these lower
poles (G) and secure with three set screws
(I) (Allen wrench (J) included).
4
E
F
G
H
I
J
F

Assembly instructions (continued)
3. Assemble the harp
Squeeze legs of the harp (D) together and
insert the two ends between the prongs of
the harp holder.
4. Assemble the shade
Place the shade (C) onto the harp (D).
Secure the shade (C) to harp (D) with
rubber washer (B) and finial (A).
5
D
Harp holder
A
B
C
D

5.Install the bulb
Prior to installing the bulb, inspect socket for silica packet. If packet is
present, then remove and throw away. Do not expose it to children or pets.
Install one 120V, 60HZ, 150-watt max. medium-base type A 3-way bulb
(not included) into the socket of the light lamp.
NOTES: Make sure a 3-way bulb is being used and that the bulb is fully
screwed into the base of the socket. this may require an extra turn of the bulb.
Plug cord into an outlet and turn on at the switch.
Assembly instructions (continued)
6
Bulb
(not included)
Socket

Care and Cleaning
Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Possible Cause
The bulb is burned out.
The power is off.
The circuit breaker is off.
There is an exposed wire.
There are too many items on
one circuit.
Discontinue use of the lamp.
Contact a qualified electrician or
call the Customer Service Team at
904-642-4340.
Unplug other items on the circuit.
Ensure that the circuit breaker
is set in the on position.
Ensure that the power supply
is turned on.
Replace the light bulb.
Solution
The bulb will not light.
The fuse blows or a
circuit breaker trips when
the light is turned on.
Problem
Did not insert plug into power
outlet.
Ensure that the plug is fully and
properly inserted into the power
outlet.
Important safety instructions
This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. never use with an extension cord
unless plug can be fully inserted. Do not alter the plug.
7

904-642-4340
@KenroyHome
[email protected]
CUSTOMER SUPPORT TEAM
For any additional questions or concerns please contact our
Customer Support Team:
www.kenroyhome.com