kenson BONO User manual

Par
Thank you for choosing BONO Office Chair
Scan the QR code to access for explanatory
installation manual in your language
Let`s get started!
Quickguide
6mm
5mm
J
A
C
D
E
F
G
H
I
J
5
1
1
1
3
1
2
2
1
M8x1 6
PartP icture Qty. 12 3
45
C
B
A
B1
D
E
F
G
I
H
K
K
1

Kenson BONO Office Chair - Prod.nr. KAS021012
Headrest adjustment
To adjust the headrest height, liftup the headrest (1) to desired position.
To adjust the headrestangle, turn the headrest directly to desired angle.
Back heigh adjustment
To change the back height (2), lift up the back by putting your force at the
bottom of the back, then adjust the back height step by step. Only the back
reach the heighest position, then can pull down the back to the first position
(lowest position)
Armrest adjustment (3)
To rise up or lower down the armrest, pull up the button under the armrest
top and move up or down. To move the arm top position, push the top for-
ward or pull backward. To adjust the arm width, push down the lever (bottom
side) to unlock the arm, pull or push the arm to desired position, then pull up
the lever to lock.
Tilt tension adjustment
To adjust the seat tilt tension, tum the tension adjustment knob (5) on the
mechanism to desired tension, turn clockwise or anticlockwise. Clockwise to
stronger and anticlockwise to weaker.
Seat height adjustment
To raise the seat height, remove weight from the seat and pull up on the
height adjustment lever (6), release the lever when reaching the desired
position. To lower the seat height, while seated, pull up slowly on the height
adjustment lever until the seat is at the desired height.
Backrest angle adjustment (tilt/swing lock)
To change backrest`s position, turn clockwise the adjustment lever (7), then
lie backwards the backrest to desired position, and turn anticlockwise the
adjustment lever to lock. To go back to the first position, turn clockwise the
adjustment lever to unlock, lie backward again, then backrest will return
automatically.
Seat depth adjustment
To enlarge the seat depth, pull up the slider lever (8) and move frontward to
desired position, then release the lever. To go back to the first position, pull
up the slider lever and remove body weight from the seat, then the seat will
go back automatically.
Seat angle adjustment (forward tilt)
To adjust the seat angle, turn the seat angle adjustment handle (4) clockwise
to lift up the seat-end up till it lock.
Turn anticlockwise the handle to go back to original position.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)