KENT A1369 User manual

150mm Palm Air Sander
Tools, Accessories & Consumables
Powerful Air Sanders with orbital motions and low air consumption. Ready for use with it’s own portable
dust bag, central vacuum system or stand-alone.
Part Nº: A1369 = 5 mm orbit
A1370 = 2.5mm orbit
A1372 = Dust Hose & Bag
A1373 = Lubricant
Features
•Direct hook-up to a central system or own dust bag
•Adjustable motor speed
•Easy to handle
•Powerful air motor with low air consumption
•Operating Pressure 90psi (6.3 kg/cm2)
Applications
Orbital Air Sanders, ready to use with any central
or portable vacuum system, but also stand-alone
with its own dust bag, or with no vacuum. With its
light weight and smooth operation is easy to
master while providing the power and flexibility you
need.
The Dust Bag A1372 is a cost effective alternative
for workplaces without a central or portable
vacuum system. The Sander self-generates a
vacuum to remove dust to the bag.
The Sanders cover all applications with all 150mm
grit grades
Instructions
1. Ensure the Sander is connected to the central or
portable system OR own bag OR standalone
2. Check Operating Pressure (90 psi/).
3. Place the Abrasive on the Pad size selected.
4. Commence Sanding.
Benefits
•Versatile with low air consumption
•Adapts to every surface preparation
•Can be used in area’s where no central vacuum
supply without dust contamination

KENT (United Kingdom) Ltd, Forsyth House, Pitreavie Drive, Pitreavie Business Park, Dunfermline, Fife, KY11 8US
Tel : [phone] or 01383 723344 between 08:30-17:30 Monday-Thursday, 09:00-15:00 on Fridays.
For out of hours queries please Fax us on 01383 735829 or Email: [e-mail]
liability resulting from negligence or where the Group was aware of the
possibility of such loss or damage arising) is excluded. This will not
operate to limit or restrict the Group's liability for death or personal injury
resulting from its negligence KENT is the trading name of KENT (United
Kingdom) Ltd
Registered Office: Amber House, Showground Road, Bridgewater,
Somerset, United Kingdom, TA6 6AJ
All rights reserved.
Terms and Conditions
No part of this publication may be reproduced, transmitted or
stored, electronically, mechanically or photocopied without
the prior permission of KENT (United Kingdom) Ltd.
This data sheet and its contents (the "Information")belong to
the KENT (United Kingdom) Ltd or are licensed to it. No
license is granted for the use of it other than for information
purposes in connection with the products to which it relates.
No license of any intellectualproperty rights is granted.
The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility
for its accuracy or completeness, any error from or omission in it
nor for any use made of it. Users of this data sheet should check
for themselves the Information and the suitability of the products
for their purpose and not make any assumptions based on
information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including
SDS available on www.kenteurope.com
Rev: 18/07/2017
Technical Information
Description: Orbital action Palm Air Sanders
weight: 0.96Kg (A1369); 0.93Kg (A1370)
Selling Unit: each
Accessories: Dust Bag/Hose: Lubricant
Customs Tariff code: 84671110
Air Pressure PSI (BAR): 90 (6.3) Approx
Motor Free Speed : 10,000 rpm @ 90 PSI (6 Bar)
Vacuum Mode: Central system; self-generated OR none
Air Inlet: in (mm) :1/4” (6.35)
Min. hose size in (mm): 1/4” (6.35)
Pad Model Size: 152mm 6 inches
Orbit Action: 5mm and 2.5mm
Air Consumption: 6.7 Ft3/m 190L/m

Instructions for use
INTRODUCING 3-in-1
Turning Adjustment (fig.1)
The motor speed can be freely adjusted to meet different jobs.
Air Supply Requirements (fig. 2)
•For best performance and maximum durability of parts, operating
air pressure must be set at 90PSI (6.2Kg/cm2) maximum at the inlet.
•Connect tool to airline using pipe, hose and fitting sizes shown
as the diagram.
Notice
•Keep hand and clothing away from the moving sand pad.
•Do not wear loose clothing or jewelry and be sure that hair is properly restrained.
•Release inlet air pressure before changing the pad.
Lubrication (fig. 3)
Use an air line lubricator
(#KENT product? or SAE #10 oil)
adjusted to 2 drops per minute,
or lubricate into air inlet daily
before and after operation.
(fig.1)
(fig.3)
(fig.2)

!! WARNING !!
Carefully read and understand all instructions before work starts
to reduce risk of injury/damage to operator(s) and tool.
This product is not subject to identification regulations under
EC Directives and the Ordinanceon Hazardous Materials.