KENT CMIC-PW4 User manual
INTERNATIONAL
130, Shields Court
Markham, Ontario, Canada L3R 9T5
Tel: 905 - 940 8539 Fax : 905 - 940 8543
Web: www.kentpp.com eMAIL: kentpp@interlog.com
Pneumatic Washing Machine
CMIC-PW4 Operation Manual
Serial No.:
Page 1
Kent Pad Printer Canada Inc.
Main Features
Up and Down
Washing
Speed
Regulators
Tank Cover
On/Off
Switch
Cup
Hangers (x2)
Ink
Container
Holder (x2)
Tank Cover
Lock
Page 2
Kent Pad Printer Canada Inc.
1. Connect compressed air into air
inlet. Air pressure should be set to
4 Bar.
2. Drain ink from cup into plastic
container.
3. Use paper towel to remove
excess ink.
Washing Procedure
Page 3
Kent Pad Printer Canada Inc.
4. Unlock and open the tank cover.
Take the washing basket out and
fill tank with washing liquid up to
approximately 80% full.
5. Place cup with lids as shown on
washing basket.
6. Plunge washing basket in the
washing liquid.
Page 4
Kent Pad Printer Canada Inc.
7.
Hang
Tighten locking knob
Hang basket on fixation pin and
tighten the locking knob.
Page 5
Kent Pad Printer Canada Inc.
8. Turn the washing machine on.
If necessary, adjust the up and
down washing speed by up and
down speed regulators.
9. Washing cycle takes
approximately 5 minutes.
11. Once the time has elapsed, take
the parts out of the tank and dry
them out.
Gently cover the ceramic ring side
of cup with cover plate for storage.
