Kenwood CAW-1170-05 User manual

Installation kit includes the following items:
* 1X 2-ISO 100 mm. metal bracket
* 1X Radio trim
* 1X Replacement panel
* 2X Mounting plates
* 2X Mounting spacers
* 2X Radio removal keys
* 4X Screws
* 2X Cushion
Installation manual for:
Mazda 5 2005 -->
* Mount the plates.
2-DIN CAW-1170-05
Use this hole
Use this hole
Kenwood DDX6029
We advice to use the following positions.
Other positions are also possible.
Use position 1 marked with a cross.
Use position 7 & 9 marked with an arrow.
Measured from left to right.
Kenwood DDX 7025
We advice to use the following positions.
Other positions are also possible.
Use position 1 marked with a cross.
Use position 14 & 16 marked with an arrow
Measured from left to right.

Remove the panel around the gear lever.
Remove the screws behind the panel
shown in 3A. This should be removed on
the passenger and driver side. Remove
the panel.
Remove the screws on the location of the
arrows shown in 3.
Remove the screw at the location of the
arrow.
Connect all of the needed wiring harnesses and check the connections carefully.
12
3
Remove the original radio panel.
4
2-DIN CAW-1170-05
Place the replacement frame and place
the 2-Din metal bracket.
Use the clips from the original panel to
tighten the replacement panel.
5
Place the headunit and radio trim.
6
3A