Kenwood KDC-BT640U User manual

How to connect your iPhone to Alexa on the Kenwood KDC-BT640U
1. Connect the iPhone to the Kenwood KDC-BT640U via “BLUETOOTH”
1a. SETTINGS >
BLUETOOTH Ensure your
Bluetooth is switched on. Then
select [KDC-BT640U] from
the OTHER DEVICES list
1d. The iPhone will now
display Allow Contacts and
Favourites Sync?
Select [PAIR]
1b. When your iPhone has
found the KDC-BT640U, it will
ask to pair. Select [PAIR]
2. You will now require the Amazon Alexa App on your iPhone and also an account needs to be set-up before
proceeding. Once downloaded from the App Store DO NOT OPEN the Amazon Alexa App via the App Store. Close the
App Store and then open the Amazon Alexa App directly. If you already have this app and it has been setup go to Fig 3.
3. Open Amazon Alexa
App and select [DEVICES]
4. Select [+]
Version0919-1
www.kenwood-electronics.co.uk
1c. The KDC-BT640U will also display
Push the “VOLUME BUTTON” on the
KDC-BT640U to accept pairing

7. Then press the [MICROPHONE] button on the KDC-BT640U
The KDC-BT640U will display “DISCONNECTED”
9. Select [CONTINUE]8. Select [KDC-BT640U] 10. Your iPhone should display
“SETUP COMPLETE”
11. Click on [DONE] on Alexa App
You can ask Alexa - “Alexa trafc information for my drive home?”
For this feature you need to setup location information for your trafc update. To do this go to Alexa app:
• Select the [3 LINES SYMBOL] top left hand corner
• [SETTINGS]
• Scroll down to [TRAFFIC] and select
• Enter location information
Press the [MICROPHONE] button on KDC-BT640U
When the KDC-BT640U displays “LISTENING” ask Alexa “Alexa trafc information for my drive home?”
When Alexa is talking it will display “SPEAKING” on the
display of the KDC-BT640U
12. Press the [MICROPHONE] button on the KDC-BT640U
When the KDC-BT640U displays “LISTENING” ask
Alexa a question - “Alexa weather for today?”
5. Select [ADD DEVICE]
Version0919-1
www.kenwood-electronics.co.uk
6. Select [HEADPHONES]