Kenwood KDC-MP3035 User manual

KDC-MP3035
KDC-MP335
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D'EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Kenwood Corporation
~ H?)Radio@
READY READY
((i
AAC
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will helpyou obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-MP3035/MP335 Serial number _
US Residence Only
Register Online
©864-3534-00/00 (KW)

Contents
Safety precautions
Notes
General features
Power
Selecting the Source
Volume
Attenuator
Audio Control
Audio Setup
Bass Boost
Speaker Setting
Switching Display
Subwoofer Output
Theft Deterrent
Faceplate
TEL Mute
Tuner features
Tuning
Tuning Mode
Direct
Access Tuning
Station
Preset Memory
Auto Memory Entry
Preset Tuning
CD/Audio file/External disc control
features
Playing CD &Audio file
Playing External Disc
Fast Forwarding and Reversing
Track/File Search
Disc Search/Folder Search
Direct Track/File Search
Direct Disc Search
Track/File/Disc/Folder Repeat
Scan Play
Random Play
Magazine Random Play
Folder Select
Text/Title
Scroll
HD Radio control features
About HD Radio
Tuning
2I English
3Menu system
18
4Menu
System
Activating Security Code
7Deactivating Security
Code
Touch Sensor Tone
Manual Clock Adjustment
DSI (Disabled System Indicator)
Display Illumination Control
Dimmer
Switching preout
Supreme Setting
CRSC (Clean Reception System Circuit)
Receive mode Setting
SIRIUS ID (ESN) display
Auxiliary Input Display Setting
Text Scroll
Built-in Auxiliary input Setting
11
CD Read Setting
Demonstration mode Setting
Basic Operations of remote control 24
Accessories/Installation Procedure
26
Connecting Wires to Terminals 27
Installation
28
13
Troubleshooting Guide
30
Specifications
32
17

Safetyprecautions
AWARNING
To prevent injury or fire, take the following
precautions:
• To prevent ashort circuit, never put or leave any
metallic objects (such
as coins or metal tools) inside
the unit.
• Mounting and wiring this product requires skills and
experience.
For safety's sake, leave the mounting
and wiring work to professionals.
Attach the panel while you are on the
vehicle
The panel lock arm appears when the panel is
removed. Therefore, the panel must be attached while
the electrical system of the car is operating.
ACAUTION
To prevent damage to the machine, take
the following precautions:
•Make sure to ground the unit to anegative 12V DC
power supply.
•Do
not install the unit in aspot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places
with too much dust or the possibility of
water splashing.
•Do
not place the faceplate (and the faceplate case)
in areas exposed to direct sunlight, excessive heat or
humidity. Also avoid places with too much dust or
the possibility of water splashing.
•
To prevent deterioration, do not touch the terminals
of the unit or faceplate with your fingers.
•Do
not subject the faceplate to excessive shock, as it
is apiece of precision equipment.
•When replacing afuse, only use a new fuse with
the prescribed rating. Using afuse with the wrong
rating may cause your unit to malfunction.
•Do
not apply excessive force to the open faceplate
or place objects on it. Doing so will cause damage
or breakdown.
•Do
not use your own screws. Use only the screws
provided. Ifyou
use the wrong screws, you could
damage the unit.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter into the
unit, the adapter might separate from the CD and
damage
the unit.
About CD players/disc changers connected
to this unit
Kenwood disc changers/ CD players released in 1998
or later can be connected to this unit.
Refer to the catalog or consult your Kenwood dealer
for connectable models
of disc changers/ CD players.
Note that any Kenwood disc changers/ CD players
released in 1997
or earlier and disc changers made by
other makers cannot be connected to this unit.
Connecting
unsupported disc changers/CD players to
this unit may result in damage.
Set the 1I0-N
II
Switch to the IIN
II
position for the
applicable Kenwood disc changers/ CD players.
The functions you can
use and the information that
can be displayed may differ depending on the models
being connected.
Lt-
• You can damage both your unit and the CD changer if you
connect them incorrectly.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on the lens may not allow CDs to play.
In such asituation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after awhile, consult your Kenwood
dealer.
The IIAAC
II
logo is trademark of Dolby
Laboratories.
English I3

Notes
•Ifyou experience problems during installation,
consult your Kenwood dealer.
•When you purchase optional accessories, check
with
your Kenwood dealer to make sure that they work
with your model and in your area.
• We recommend the use of <Activating Security
Code> (page
19) to prevent theft.
•The characters which can be displayed by this unit
are A-Z 0-9 @ '" '%&*+ - =,./ \ < > [J () : ; 1\ - {} I
•The illustrations of the display and the panel
appearing in this manual are examples used
to
explain more clearly how the controls are used.
Therefore,
what appears on the display in the
illustrations may differ from
what appears on the
display on
the actual equipment, and some of the
illustrations on the display may be inapplicable.
How to reset your unit
•Ifthe unit fails to operate properly, press the Reset
button.The unit returns to factory settings when the
Reset button is pressed.
•
Press the reset button if the disc auto changer fails
to operate correctly. Normal operation should be
restored.
Cleaning the Unit
Ifthe faceplate of this unit is stained, wipe it with a
dry soft cloth such
as asilicon cloth.
Ifthe faceplate
is stained badly, wipe the stain off with
acloth moistened with neutral cleaner, then wipe it
again
with aclean soft dry cloth.
Lt
•Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using avolatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
Cleaning the Faceplate Terminals
Ifthe terminals on the unit or faceplate get dirty, wipe
them with aclean soft dry cloth. '
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this
unit for the first time, cancel the
<Demonstration
mode Setting> (page 23).
2 :3
KENWOOO
Reset button
4I English

About Audio file
•Playable Audio file
AAC (.m4a), MP3 (.mp3), WMA (.wma)
•Playable disc media
CD-R/RW/ROM
•Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Although
the audio files are complied with the
standards listed above,
the play maybe impossible
depending on the types or conditions
of media or
device.
•Playing order of the Audio file
In the example of folder/file tree shown below, the
files
are played in the order from CD to @.
o CD (OJ) D: Folder
J>CD J> :Audio file
OJ
L-OJr-J>@
Q] LJ>@
t=J>@
CtltJ>®
1@
An online manual about audio files is put on the
site, www.kenwood.com/audiofilel. On this online
manual, detailed information and notes which
are not
written in this manual are provided. Make sure to read
through the online manual as well.
Handling CDs
•Do not touch the recording surface of the CD.
•Do not stick tape etc. on the CD, or use a CD with
ta pe stuck on it.
•Do
not use disc type accessories.
•Clean from
the center of the disc and move
outward.
•When removing
CDs from this unit, pull them out
horizontally.
•If
the CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen etc.
CDs that cannot be used
• CDs that are not round cannot be used.
•
CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
•This
unit can only play the CDs with ffiJm ~r~ ffi]m
DIlJI1JU.AUIllO~~
This unit may not correctly play discs which do not·
have the mark.
•
You cannot playa CD-R or CD-RW that has not been
finalized. (For the finalization process refer
to your
CD-R/CD-RW
writing software, and your CD-R/CD-
RW recorder instruction manual.)
English I5

Notes
About SIRIUS Satellite radio tuner
Refer to the instruction manual of SIRIUS Satellite
radio
tuner KTC-SR90l/SR902/SR903 (optional
accessory),
when connected, for the operation
method.
•Refer to the sections of Amodels for operations.
FM/
I~ SCRL AUTO ~
=====~KE~NW;::::O:::::::::OD~=====I-- =1
~ ~
~VOL I
r~
'--------M.RO-M -.o~ ~
~~.!:' ':S"::<::::::::::::'::=\:::::}::::'=:JS===' :::=:::;::;::::,~'~~- ~
I
1 -6 SRC AM DISP/C.S,
About DAB Tuner control
Refer to ~ group on the Instruction manual of DAB
Tuner KTC-9090DAB (optional accessory) for the
control method of DAB Tuner function.
However, the following control methods of the
function for this unit may be different from the
Instruction manual; therefore, refer to the following
supplemental instruction.
<Auto Ensemble Memory Entry>
1. Select the preset band for Auto Ensemble Memory
Entry.
2. Press the [AMEJ button for at least 2seconds.
Open Auto Ensemble
Memory Entry.
After storing in the memory finishes, the number
of the pre-set buttons and the ensemble label are
displayed.
<Searching by programme type and language>
and <Languages
to be displayed> in <Programme
Type (PTY) Function>
At the operation to press [DISPJ button, use [AUTO]
button instead.
<Automatic Switching DAB priority>
This function cannot be used.
6I English
ACAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.
Kenwood Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI
TOKYO, JAPAN
KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS NO.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.
Location: Bottom Panel
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications
are expressly approved in the
instruction manual.The user could lose the authority
to operate this equipment if an unauthorized change
or modification is made.
NOTE
This equipment has been tested and found to
comply with the limits for a Class Bdigital device,
pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in aresidential installation. This
equipment may cause harmful interference to radio
communications, if it is not installed and used in
accordance with the instructions. However, there
is no guarantee that interference will not occur in a
particular installation. Ifthis
equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one
or more of the following
measures:
•Reorient or relocate
the receiving antenna.
•Increase the separation between
the equipment
and receiver.
•Connect
the equipment into an outlet on a
circuit different from
that to which the receiver is
connected.
•Consult the dealer or
an experienced radiolTV
technician for help.

General features
8.800ST
KENWOOD
SRC Control knob
...
..
Power
,..-- , __ C_IOc_kI_sp_la
y_
C7~ · L:~ .~.:.:.··.··.·.f :
:i .... :·:: .... :: .•• _._ ••. :
.... _-- .
.. .. ---_ .
.....
__ .
________ 'B_oi_ST_' ~---:-~ -_- ~_~_:-_-:_:_:-_-----'
BOOST indicator AIT indicator
Volume
Turning ON the Power
Press the [SRC] button.
Turning OFF the Power
Press the [SRC] button for at least 1 second.
Selecting the Source
Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Attenuator
Press the [SRC] button.
SIRIUS tuner (Optional accessory)
Tuner or HD Radio (Optional accessory)
CD
External disc (Optional accessory)
Auxiliary input
Auxiliary input (Optional accessory)
Standby (Illumination only mode)
"SIRIUS"
"TUNER" or "HD RADIO"
"CD"
"AUX"
"AUX EXT"
"STANDBY"
Turning the volume down quickly.
Press the [ATT] button.
Each time you press the button, the Attenuator
turns
ON and OFF.
When the Attenuator is ON, the "AD" indicator
blinks.
English I7

General features
Audio Control
1Select the source to adjust
Press the [SRC] button.
2Enter Audio Control mode
Press the [VOL] knob.
3Select the Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown
in
the table below.
4Adjust the Audio item
Turn the [VOL] knob.
Audio Setup
Setting the Sound system, such as Volume offset.
1Select the source to adjust
Press the [SRC] button.
2Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown
in
the table below.
4Adjust the Audio setup item
Turn the [VOL] knob.
•Volume offset: Sets each source's volume as adifference
from the
basic volume.
5Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
Subwoofer level IISW L
II
System Q IINATURALIII"ROCKII/
"POPS"/"EASY"/"TOP40'1/
IIJAZZII
Bass level IIBAS L'
Middle level IIMID L
II
Treble level liTRE L
II
Balance II BALli
Fader IIFADII
Exit Audio Control mode (Volume control mode)
-15-+15
Natural/Rock/
Pops/Easy/Top 40/
Jazz
-8-+8
-8-+8
-8-+8
Left 15 - Right 15
Rear 15 - Front 15
Low Pass Filter
Volume offset
~
~
'lPF
II
"V-OFF
II
80/120/160/Through Hz
-8 - ±O (AUX :-8 - +8)
~ About System Q
• You can recall the best sound setting preset for different
types
of music.
• Change each setting value with the <Speaker Setting>
(page 9). First, select the speaker type with the Speaker
setting.
•
"USER": The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
5Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob and [AD]
button.
Bass Boost
Bass sound can be enhanced by one-touch
operatin.
Press the [B.BOOST] button.
When you press the button once, the current Bass
Boost setting is displayed.
Each time you press the button, the Bass Boost
setting alternates.
8I English
Bass Boost 1
Bass Boost 2
Bass Boost off
"88-L L1"
"BB-L L2"
"BB-L OFF
II

Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2Enter Speaker Setting mode
Press the [VOL] knob.
3Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting alternates
between the settings shown
in the table below.
In Audio file source
Song title & Artist name
Album name & Artist name
Folder name
File name
Track number & Play time
Clock
In HD Radio source
Station name
Song title/ Artist name/
Album name/ Genre
"TITLE"
"ALBUM"
"FOLDER"
"FILE"
"P-TIME"
"CLOCK"
"ST NAME"
"TITLE"
OFF
For 5&4 in. speaker
For 6& 6x9 in. speaker
liSP OFF"
liSP 5/4"
liSP 6*9/6"
Frequency
Clock
In SIRIUS tuner source
"FREQ"
II CLOCK"
For the OEM speaker
liSP OEM"
In Standby/ Auxiliary input source
4Exit Speaker Setting mode
Press the [VOL] knob.
Switching Display
Changing the information displayed.
1Enter Switching Display mode
Press the Control knob for at least 1 second.
"DISP SELl is displayed.
2Select the Display item
Push the Control knob towards [~] or [~].
Channel name
Song title
Artist name
Composer name
Category name
Label name
Comment
Band & Channel number
Clock
Source name
Clock
"CH NAME"
"SONG"
"ARTIST"
"COMPOSER"
"CATEGORY"
"LABEL"
"COMMENT"
"CH NUM"
"CLOCK"
"SRC NAME"
"CLOCK"
In CD &Externaldisc source
In Tuner source
Frequency
Clock
Disc title
Track title
Track number & Play time
Clock
"FREQ"
"CLOCK"
"D-TITLE"
"T-TITLF'
"P-TIME"
"CLOCK"
3Exit Switching Display mode
Press the Control knob.
~
~
•If the selected display item does not have any
information, alternative information is displayed.
•When you select the clock display, the display setting of
each source will be changed to the clock display.
•Album name cannot be displayed in WMA file.
English I9

General features
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Push the Control knob toward [AM] for at least
2seconds.
Each time you push the knob, Subwoofer output
switches
ON and OFF.
When it is ON, "SW ON" is displayed.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken
with you, helping to deter theft.
Removing the Faceplate
1 Press the Release button.
Drop open the faceplate.
2Drawing the faceplate to left side pull it to
forward and remove it.
~
•The faceplate is aprecision piece of equipment and can
be damaged by shocks orjolts.
•Keep the faceplate in its faceplate case while detached.
•Do not expose the faceplate (and the faceplate case) to
direct sunlight or excessive heat or humidity. Also avoid
pla~es with too much dust or the possibility of water
splashing.
Reattaching the Faceplate
1Align the shaft on the unit with the depression
on the faceplate.
10 I English
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use
the unit.
TEL Mute
The audio system automatically mutes when a call
comes in.
When acallcomes in
"CALL' is displayed.
The audio system pauses.
Listening to the audio during acall
Press the [SRC] button.
The "CALLI display disappears and the audio system
comes back ON.
When the callends
Hang up the phone.
The "CALLI display disappears and the audio system
comes back ON.
~
~
• To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using acommercial
telephone accessory. Refer to <Connecting Wires to
Terminals> (page 27).

Tuner features
SRC Control knob
KENWOOD
://::::11 n~\::rrll 113:: \'t41 M
~~~~~I~~~~~;;I~;;I~~
1-6
Band display Frequency display
r-;;;, ==;;;;.I~==;;;\:---;;, ==;;;;.I~=;;;;;;:l--------l
. ....
·.
·.
·.
......
: ..... :.
. ....
. .
. .
~~.:)
· ..
· ..
· .:
.
.
.....
.
.
i····
.... . .
..... .
..... . .. .
..) :.:
ch : •
. ... _._ ....
C§IJ ~::::::::::
I
..... _ .....
...........
---.-~
ST indicator
Preset station number
Tuning Tuning Mode
Choose the tuning mode.
Press the [AUTO] button.
Each time you press the button, theTuning mode
alternates between the modes shown in the table
below.
Selecting the station.
1Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
2Select the band
Push the Control knob towards [FM] or [AM].
Each time you push the knob toward [FM], it
switches between the
FM 1, FM2, and FM3 bands.
3Tune up or down band
Push the Control knob towards [~] or [~].
§
Auto seek
Preset station seek
Manual
"AUTO 1
11
"AUTO 2"
"MANUAL"
Automatic search for a station.
Search in order of the stations in
the Preset memory.
Normal manual tuning control.
•During reception of stereo stations the 15T" indicator is
ON.
English I 11

Tuner features
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1Select the band
Press the [FM] or [AM] button.
2Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"- - - -" is displayed.
3Enter the frequency
Press the number buttons on the remote
control.
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1Select the band for Auto Memory Entry
Push the Control knob towards [FM] or [AM].
2Open Auto Memory Entry
Press the [AME] button for at least 2seconds.
"A-MEMORY" is displayed.
When 6stations that can be received are put in the
memory Auto Memory
Entry closes.
Preset Tuning
Cancelling DirectAccess Tuning
Press the [DIRECT] button on the remote
control.
92.1 MHz (FM)
810 kHz (AM)
[0], [9], [2], [1]
[0], [8], [1], [0]
Recalling the stations in the memory.
1Select the band
Push the Control knob towards [FM] or [AM].
2Recall the station
Press the desired [1] -[6] button.
Station Preset Memory
Putting astation in the memory.
1Select the band
Push the Control knob towards [FM] or [AM].
2Select the frequency to put in the memory
Push the Control knob towards [, ......] or [~~].
3Put the frequency in the memory
Press the desired [1] -[6] button for at least 2
seconds.
The preset number display blinks 1time.
On each band, 1station can be put in the memory
on each [1 J- [6J button.
12 IEnglish

CD/Audio file/External disc control features
KENWOOD
Release button
SCAN RDMI REP F.SEL M.RDM SRC Control knob
3
Track number Play time
r--:;;t ===;;.I~===;;'1~t===JI.===;-\ ------1
. ....
.. ,
.. '
: .:
:. :
:i .... :
..... . ....
.. ,
.. :.
:' ..... :
:. : :
::: ... :.: .....
.....
i ·
(:.::
.....
.. ,
.. ,
: .:
:. :
:i .... :
.....
..
.. ... .
...... .. .
~ .. ):.:
. .
... __ . -_ .
.. . _---_ .
.. _.
.. _.
~--------- II_:_~_~-~·_·:_:_:_:·_·:---'
IN indicator
Disc number
Playing CD &Audio file
When there isno disc inserted
1Drop open the faceplate
Press the Release button.
2Insert adisc.
3Push the faceplate on the left side, and return it
to its former position.
Lt
•When the faceplate has been dropped open, it might
interfere with the shift lever or other vehicle function.
Ifthis happens, pay attention
to safety and move the
shift lever or take
an appropriate action to remove the
obstacle, then operate the unit.
•Do
not use the unit with the faceplate in the open
condition. If it's used in the open position dust
can enter
the inside part and cause damage.
@2
•When adisc is inserted, the "IN" indicator is ON.
When adiscis inserted
Press the [SRC] button.
Select the "CD" display.
Pause and play
Press the Control knob.
Each time you press the knob, the audio pauses or
plays.
Eject the disc
1Drop open the faceplate
Press the Release button.
2Eject the disc
Press the [~] button.
3 Press the faceplate on the left side, and return it
to its former position.
~
~
• You can eject the disc for 10 minutes after switching off
the engine.
English I 13

CD/Audio file/External disc control features
Playing External Disc
Playing discs set in the optional accessory disc
player connected to this unit.
Press the [SRC] button.
Select the display for the disc player you want.
Display examples:
Function of disc changer/ Audio file
Disc Search/Folder Search
Selecting the disc set in the Disc changer or the
folder recorded on the Audio file media.
Push the Control knob towards [FM] or [AM].
"CDCH"
"MDCH"
CD changer
MD changer
Function of remote control
DirectTrack/File Search
Pause and play
Press the Control knob.
Each time you press the knob, the audio pauses or
plays.
~
~
•Disc lOis displayed as "0".
•The functions that can be used and the information that
can be displayed will differ depending on the external
disc players being connected.
Fast Forwarding and Reversing
Fast Forwarding
Hold down toward [~~] with the Control knob.
Release to resume the playback.
Reversing
Hold down toward [I~] with the Control knob.
Release to resume the playback.
~
•There is no sound while the Audio file is being searched.
•The accurate track
time is not displayed during fast
forwarding or reversing
of the Audio file.
Track/File Search
Searching for a song on the disc or in the Audio file
folder.
Push the Control knob towards [~] or [~~].
14 I English
Doing Track/File Search by entering the track/file
number.
1Enter the track/file number
Press the number buttons on the remote
control.
2 Do Track/File Search
Press the [~] or [~] button.
Cancelling DirectTrack/File Search
Press the [~II] button.
Function of disc changers with remote control
Direct Disc Search
Doing Disc Search by entering the disc number.
1Enter the disc number
Press the number buttons on the remote
control.
2 Do Disc Search
Press the [+] or [-] button.
Cancelling DirectDisc Search
Press the [~II] button.
~
•Input flO" to select disc 10.

Track/File/Disc/Folder Repeat Random Play
Replaying the song, disc in the Disc changer or
Audio file folder you are listening to.
Press the [REP] button.
Each time you press the button, the Repeat Play
alternates between the modes shown in the tables
below.
In CD &External disc source
Playing the first part of each song on the disc or
Audio file folder you are listening to and searching
for the song you want to hear.
Track Repeat
Disc Repeat (In Disc Changer)
OFF
In Audio file source
File Repeat
Folder Repeat
OFF
Scan Play
"TRAC REP"
"Dlse REP"
"REP OFF'
"FILE REP"
"FOLD REP"
"REP OFF"
Play all the songs on the disc or Audio file folder in
random order.
Press the [ROM] button.
Each time you press the button, Random Play turns
ON or OFF.
When the Random mode is ON, "DISC RDM"j"FOLD
RDMlj"RDM ON" is displayed.
@2
•When you push the Control knob toward [~], the next
random song starts.
Function of disc changer
Magazine Random Play
Play the songs on all the discs in the disc changer in
random order.
Press the [M.ROM] button.
Each time you press the button, the Magazine
Random Play turns ON or OFF.
When the Magazine Random mode is ON, lIMGZN
RDM" is displayed.
@2
•When you push the Control knob toward [~], the next
ra ndom song sta rts.
1Start Scan Play
Press the [SCAN] button.
"TRAC SCNlj"FILE SCN"/ISCAN ON" is displayed.
2Release it when the song you want to listen to
is played
Press the [SCAN] button.
English I 15

CD/Audio file/External disc control features
Function of Audio file
Folder Select
Quickly selecting the folder you want to hear.
1Enter Folder Select mode
Press the [F.SEL] button.
"FLD SELl is displayed.
During Select
mode the folder information is
displayed as shown below.
Folder name display
Displays the current folder name.
I
2Select the folder level
Push the Control knob towards [FM] or [AM].
With the
[FM] of the Control knob, you move 1
level down and with the [AM] of the Control knob,
1level up.
Selecting afolder in the same level
Push the Control knob towards [~] or [~].
With the [~] of the Control knob, you move
to the previous folder, and
with the [~] of the
Control knob,
to the next folder.
Returning to the top level
Press the [3] button.
Scrolling the folder namedisplay
Push the Control knob toward [FM] for at least
2seconds.
3Decide the folder to play
Press the Control knob.
The Folder Select
mode releases, and the Audio file
in the folder being displayed
plays.
Cancelling the FolderSelectmode
Press the [F.SEL] button.
16 I English
Text/Title Scroll
Scrolling the displayed CD text, Audio file text, or
MD title.
Push the Control knob toward [FM] for at least
2seconds.
~
~
•When the <Display Illumination Control> (page 20) is set
to OFF, the display may black out while scrolling.

HD Radio control features
KENWOOD
SRC Control knob
Band display Frequency display
r--;;;t ==;;;;.I~==~\-~t==;;;I~=='\-------l
. ..
..
.
.....
:.
..... .
.. ):
Preset station number
.....
·.
·.
· .
....
· .
= ..... =.
.....
. .
::.::e
.....
·
....
·
·
·
··
·
·
·
ch : :
.... _. _.
.... _-_ .
[ill ..... _ .
I---------------I.-:-~-~-~:_·:_:_:·_: :-=---.'
ST indicator
About HD Radio
Tuning
•When you connect an HD Radio, Tuner features
of the unit are disabled and changed to HD Radio
tuner features. Aportion
of the setting methods
including
the Tuning Mode will change.
•With the
HD Radio tuner, you can use the similar
functions
to <Station Preset Memory>, <Auto
Memory Entry>, <Tuning Mode>, and <Preset
Tuning>
of Tuner features. Refer to Tuner features
for
how to use the functions.
Selecting the station.
1Select HD Radio source
Press the [SRC] button.
Select the tlHD RADIO" display.
2Select the HD FM band
Push the Control knob toward [FM].
Each time you push the knob to [FM], the band
alternates between the
HF1, HF2, and HF3 bands.
Select the HD AM band
Push the Control knob toward [AM].
3Tune up or down band
Push the Control knob towards [~] or [~~].
English I 17

Menu system
KENWOOD
MENU
SRC Control knob
·.
·.
·:
.:
-.:
..... ..... ..... ..... . ....
.. . .. ..
:. .:: . :: ::
.: f··· i.·.·.·.·. •.... ::
.. : .. : ..... . ....
l J
'-----1--------'
Menu display
Menu System
Setting beep sound during operation, etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
1Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2Select the menu item
Push the Control knob towards [FM] or [AM].
Example: When you want to set the beep sound
select the
"BEEP" display.
3Set the menu item
Push the Control knob towards [~] or [~~].
Example: When you select "BEEP", each time you
push the knob it alternates between
"BEEP ON" or "BEEP OFF". Select 1 of them
as the setting.
You can continue by returning to step 2 and
setting other items.
18 I English
4Exit Menu mode
Press the [MENU] button.
~
~
•When other items those applicable to the basic
operation method above are displayed, their setting
content chart is entered. (Normally the setting listed at
the top of the chart is the original setting.)
Also, the explanation for items that are not applicable
«Manual Clock Adjustment> etc.) are entered step by
step.

In Standby mode
Activating Security Code
Activating the Security Code disables the usage
of audio unit by someone else. Once the Security
Code is activated, the entry of authorized Security
Code is required to turn on the audio unit when it is
removed from the vehicle. Indication of this Security
Code activation prevents your precious audio unit
from stealing.
~
~
• You can set the Security Code with a4 digit number ofyour
choice.
•
The Security Code cannot be displayed or referenced. Make
anote of the Security Code and treasure it up.
1Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2Enter Menu mode
Press the [MENU] button for at least 1second.
When I'MENU
lI
is displayed, "CODE SET
II
is also
displayed.
3Enter Security Code mode
Press the Control knob for at least 1second.
When lIENTER" is displayed, "CODE
lI
is also
displayed.
4Select the digits to enter
Push the Control knob towards [~] or [~].
5Select the Security Code numbers
Push the Control knob towards [FM] or [AM].
6Repeat step 4and 5, and complete the Security
Code.
7Confirm the Security Code
Press the Control knob for at least 3seconds.
When "RE-ENTER" is displayed, "CODE" is also
displayed.
8Do the step 4through 7operation, and reenter
the Security Code.
"APPROVED" is displayed.
The Security Code function activates.
9Exit Security Code mode
Press the [MENU] button.
~
•If you enter the wrong Code in step 4through 6, repeat
from step
4.
Resetting theSecurityCode function when the
audio
unit is first used after removed from the
battery powersource orthe Resetbutton;s
pressed
1Turn the power ON.
2Do the step 4through 7operation, and reenter
the Security Code.
"APPROVED
II
is displayed.
Now, you can use the unit.
~
~
• When the Security Code function is activated, "CODE
SET
ll
changes to llCODE CLR
ll
.
•
To deactivate the Security Code function, see the next
section <Deactivating Security
Code>.
In Standby mode
Deactivating Security Code
To deactivate the Security Code function.
1Select Security Code mode
Push the Control knob towards [FM] or [AM].
Select the "CODE CLR" display.
2Enter Security Code mode
Press the Control knob for at least 1second.
When "ENTER" is displayed, "CODE" is also
displayed.
3Select the digits to enter
Push the Control knob towards [~] or [~~].
4Select the Security Code numbers
Push the Control knob towards [FM] or [AM].
5Repeat step 3and 4, and complete the Security
Code.
6 Press the Control knob for at least 3seconds.
"CLEAR" is displayed.
The Security Code function deactivates.
7Exit Security Code mode
Press the [MENU] button.
~
•Ifawrong security code is entered, "ERROR" is displayed.
Enter acorrect security code.
English I19

Menu system
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display Illumination Control
This function turns off the display when you
perform no operation for 5 seconds. This function is
effective when you are driving at night.
"BEEP ON"
"BEEP OFF'
Beep is heard.
Beep canceled.
"DISP ON"
"DISP OFF"
~
~
Keeps the display on.
Turns off the display when you perform no
operation for 5 seconds.
In Standby mode
Manual Clock Adjustment
1Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM].
Select the "elK ADJ" display.
2Enter Clock Adjust mode
Press the Control knob for at least 1second.
The clock display blinks.
3Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards [~] or [~~].
4Exit Clock adjustment mode
Press the [MENU] button.
• Set the Display Illumination Control when the
<Demonstration mode Setting> (page 23) is set to OFF.
•When the display is off, pressing any key will turn qn the
display.
•When the display is off, you cannot perform any
operation except for the following:
•Volume
•Attenuator
•Selecting the source
•Turning off the power
•During function control, such as the Menu System, the
display stays on.
Dimmer
You can lower the brightness of the display by using
the dimmer function.
In Standby mode
DSI (Disabled System Indicator)
"DIM ON"
'IDIM OFF"
The display dims.
The display doesn't dim.
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
"DSION"
"DSIOFF"
LED fiashes.
LED OFF.
Function of KDC-MP335
In Standby mode
Switching preout
Alternating the preout between the rear and
subwoofer. (With the subwoofer the sound outputs
without being effected by fader control.)
20 I English
"SWPRE R"
"SWPRE SW"
Rear preout.
Subwoofer preout.