Kenwood KDC-X589 - eXcelon Radio / CD User manual

CD-RECEIVER
KDC-X589
KDC-MP5028
KDC-MP528
INSTRUCTION MANUAL
KENWOOD CORPORATION
_. Designed for
_.
Windows
r", Media~M
<c.~
AAC PHAINOISE
SIRIUSiJ H>' Radio
REA 0y -!JREADY
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty
card, and in the space provided below. Refer to the model and serial numbers whenever you call
upon your KENWOOD dealer for information or service on the product.
Model KDC-X589, KDC-MP5028, KDC-MP528 Serial number _
US Residence Only
©864-2975-10/01 (KW)

Tuning
Tuning Mode
Direct
Access Tuning
Station
Preset Memory
Auto Memory Entry
Preset Tuning
CD/Audio file/External disc control
Basic Operations of remote 30
Accessories/Installation Procedure 32
Menu system 23
Menu System
Security Code
Touch Sensor Tone
Manual Clock Adjustment
DSI (Disabled System Indicator)
Selectable Illumination
Dimmer
SWitching preout
Built-in Amp Setting
Dual Zone System Setting
B.M.5. (Bass Management System)
B.M5. Frequency Offset
AMP Control
CRSC (Clean Reception System Circuit)
Receive mode Setting
SIRIUS 10 (ESN) display
Auxiliary Input Display Setting &Station/Disc
Naming
Text Scroll
Built-in Auxiliary input Setting
CD Read Setting
Voice Index
ACDrive firmware version display
Unique
10 display
Audio
Preset Memory
Audio
Preset Call
Demonstration mode Setting
Contents
Safety precautions
Notes
Warning
About CDs
About AAC, MP3 and WMA
General features
Power
Selecting the Source
Volume
Attenuator
System Q
Audio Control
Audio Setup
Subwoofer Output
Speaker Setting
SWitching Display
Station/Disc Naming
(SNPS/DNPS)
Faceplate Angle Adjustment
Theft Deterrent
Faceplate
TEL Mute
Tuner features
features
Playing CD &Audio file
Playing External Disc
Fast Forwarding and Reversing
Track/File Search
Disc Search/Folder Search
DirectTrack/File Search
Direct Disc Search
Track/File/Disc/Folder Repeat
Scan Play
Random Play
Magazine Random Play
Disc Random Play
Folder Select
SWitching the
Play mode
Letter
Seek
TextlTitle Scroll
2I English
4
S
6
7
8
9
1S
17
HO Radio control features
Tuning
Connecting Wires to Terminals
Installation
Removing
the Unit
Troubleshooting Guide
Specifications
22
33
34
36
37
40

The "AAC" logo is trademark of Dolby
Laboratories.
English I3

Safetyprecautions
AWARNING
To prevent injury or fire, take the
following precautions:
• To prevent ashort circuit, never put or leave any
metallic objects (such
as coins or metal tools)
inside the unit.
Attach the panel while you are on the
vehicle
The panel lock arm will be appeared when the
panel
is removed. Therefore, the panel must be
attached during the driving.
ACAUTION
To prevent damage to the machine, take
the following precautions:
•Make sure to ground the unit to anegative 12V
DC power supply.
•
Do not install the unit in aspot exposed to direct
sunlight or
excessive heat or humidity. Also avoid
places
with too much dust or the possibility of
water splashing.
•
Do not set the removed faceplate or the faceplate
case in areas exposed to direct sunlight, excessive
heat or humidity. Also avoid places with too much
dust or the possibility
of water splashing.
•
To prevent deterioration, do not touch the
terminals
of the unit or faceplate with your
fingers.
•Do
not subject the faceplate to excessive shock,
as it is apiece of precision equipment.
•When replacing a
fuse, only use anew one with
the prescribed rating. Using afuse with the wrong
rating may cause your unit to malfunction.
•
Do not apply excessive force to the open
faceplate
or place objects on it. Doing so will
cause damage or breakdown.
•
Do not use your own screws. Use only the screws
provided. Ifyou
use the wrong screws, you could
damage the unit.
Do Not Load 3-in. CDs in the CD slot
Ifyou try to load a 3 in. CD with its adapter into the
unit, the adapter
might separate from the CD and
damage the unit.
4I English
About CD players/disc changers
connected
to this unit
KENWOOD disc changers! CD players released in
1998 or later can be connected
to this unit.
Refer to the catalog or consult your Kenwood
dealer for connectable models
of disc changers!
CD players.
Note
that any KENWOOD disc changers! CD players
released in 1997 or earlier and disc changers made
by other makers cannot be connected
to this unit.
Unsupported connection may result
in damage.
Setting the "O-N" Switch
to the "N" position for the
applicable
KENWOOD disc changers! CD players.
The functions that can be used and the information
that can be displayed will differ depending on the
models being connected.
~
• You can damage both your unit and the CD changer if
you connect them incorrectly.
LX-bus connection
The LX AMP and the sensor unit cannot be
connected simultaneously.
You must connect any of them at atime.
Lens Fogging
Right after you turn on the car heater in cold
weather,
dew or condensation may form on
the
lens in the CD player of the unit. Called lens
fogging,
CDs may be impossible to play. In such
asituation, remove the disc and wait for the
condensation
to evaporate. Ifthe unit still does
not operate normally after awhile, consult your
Kenwood dealer.
NOTE
This Class Bdigital apparatus complies with
Canadian
ICES-Om.

Notes
•Ifyou experience problems during installation,
consult your Kenwood dealer.
•Ifthe unit
fails to operate properly, press the Reset
button.The unit returns to factory settings when
the
Reset button is pressed.
•
Press the reset button if the disc auto changer fails
to operate correctly. Normal operation should be
restored.
Reset button
Reset button
•
We recommend the use of <Security Code>
(page
24) to prevent theft.
•The characters which
can be displayed by this
unit
are A-Z 0-9 @ '" '%&*+- = , . / \ < > [] () :;
!\-{}I-·
•The illustrations of the display and the panel
appearing
in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on
the display in the
illustrations may differ from what appears on
the display on the actual equipment, and some
of the illustrations on the display may represent
something impossible in actual operation.
Cleaning the Unit
Ifthe faceplate of this unit is stained, wipe it with a
dry soft cloth such
as asilicon cloth.
Ifthe faceplate
is stained badly, wipe the stain off
with acloth moistened with neutral cleaner, then
wipe neutral detergent off.
~
•Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping
the faceplate with ahard cloth
or using avolatile liquid such
as thinner or alcohol may
scratch the surface
or erases characters.
Cleaning the FaceplateTerminals
Ifthe terminals on the unit or faceplate get dirty,
wipe them with adry, soft cloth.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
<Demonstration mode Setting> (page
29).
About SIRIUS Satellite radio tuner
Refer to the instruction manual of SIRIUS Satellite
radio tuner
KTC-SR901/SR902/SR903 (optional
accessory), when connected, for the operation
method.
•
Refer to the sections of Amodels for operations.
English I5

Notes
About DAB Tuner control
Refer to ~ group on the Instruction manual of DAB
Tuner KTC-9090DAB (optional accessory) for the
control
method of DAB Tuner function.
However, the following control methods
of the
function for this
unit may be differed from the
Instruction manual; therefore, refer
to the following
supplemental instruction.
<Auto Ensemble Memory Entry>
1. Select the preset band for Auto Ensemble
Memory Entry.
2. Press the [AME] button for at least 2seconds.
Open Auto Ensemble Memory Entry.
After storing in
the memory finishes, the
number
of the pre-set buttons and the
ensemble label
are displayed.
<Searching by programme type and language>
and <Languages
to be displayed> in
<Programme Type (PTY) Function>
At the operation to press [DISP] button, press
[AUTO] button.
About "Media Manager" of PC application
attached
to KDC-X589
•"Media Manager" is recorded in the CD-ROM
attached
to this unit.
•
Refer to the attached installation manual for the
installation
method of "Media Manager".
•
Refer to the user's manual recorded in the
installation CD-ROM and Help of "Media Manager"
for the operation
method of "Media Manager".
•The unit
can play CD (hereafter called "ACDrive
disc") created by "Media Manager".
•
Refer to the following site for the updated
information
of "Media Manager".
http://www.kenwood.mediamanager.jp/
·Contact Kenwood for the function and operation
of the "Media Manager".
•"Media Manager"
is aproduct of PhatNoise.
6I English
AWarning
ACAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result
in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating
to laser product safety.
KENWOOD CORPORATION
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI
TOKYO, JAPAN
KENWOOD CORP CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS NO.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.
Location: Bottom Panel
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications
to
this equipment may cause harmful interference
unless the modifications
are expressly approved
in
the instruction manual. The user could lose
the authority
to operate this equipment if an
unauthorized change or modification is made.
NOTE
This equipment has been tested and found to
comply with the limits for a Class Bdigital device,
pursuant
to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference
in aresidential
installation. This
equipment may cause harmful
interference
to radio communications, if it is
not installed and used in accordance with the
instructions. However, there
is no guarantee
that interference will
not occur in aparticular
installation. Ifthis
equipment does cause harmful
interference
to radio or television reception, which
can be determined by turning the
equipment off
and on, the user is encouraged to try to correct
the interference by one or more
of the following
measures:
•Reorient or relocate
the receiving antenna.
•Increase the separation between the
equipment
and receiver.
•Connect
the equipment into an outlet on a
circuit different from that
to which the receiver is
connected.
•Consult the dealer or
an experienced radiolTV
technician for help.

About CDs
CDs that can't be used
• CDs that aren't round can't be used.
Removing CDs
When removing CDs from this unit pull them out
horizontally.
CD storage
•Don't place them in direct sunlight (On the seat
or dashboard etc.) and where the temperature
is
high.
•Store
CDs in their cases.
• CDs with coloring on the recording surface or that
are dirty can't be used.
•
This unit can only play the CDs with
~~
It may not correctly play discs which do not have
the mark.
• A
CD-R or CD-RW that hasn't been finalized can't
be played.
(For the finalization process refer to
your CD-R/CD-RW writing software, and your CD-
R/CD-RW recorder instruction manual.)
When using a new CD
Ifthe CD center hole or outside rim has burrs, use it
after removing
them with aball pen etc.
·
CD-R and CD-RW are easier to damage than a
normal music
CD. Use a CD-R or aCD-RW after
reading the caution items on the package etc.
•Don't stick tape etc. on
the CD.
Also, don't use a CD with tape stuck on it.
Handling CDs
•Don't touch the recording surface of the CD.
CD accessories
Don't use disc type accessories.
CD cleaning
Clean from the center of the disc and move
outward.
English I7

About AAC, MP3 and WMA
The playable AAC/MP3/WMA file (hereafter called
Audio file) and
the media format has the folloWing
limitation.The Audio file, which
is out of the
specification, may
not able to be played normally,
or the file and folder names may
not be displayed
correctly.
it
•Attach the correct extension for the Audio file
(AAC: ".M4A", MP3: ".MP3", WMA: "WMA")
•Do
not attach the extensions to the other files besides
the Audio file. If it
is attached, the file, which is not the
Audio file, will be played and outputs the loud noise, and
then the speaker will be damaged.
•The files
with copy protection cannot be played.
Playable AAC file
• ".m4a" file encoded by AAC-LC format.
Refer to http://www.kenwood.mediamanager.jp/
for the details.
Playable MP3 file
• MPEG 1/2 Audio Layer 3file
•Transfer
bit rate: 8-320 kbps
•Sampling frequency
KDC-X589: 16,22.05,24,32,44.1,48 kHz
KDC -MP5028/MP528: 8, 11.025, 12, 16, 22.05, 24,
32,44.1,48 kHz
Playable WMA file
•The file in accordance with Windows Media Audio
(Except for the file for Windows Media Player 9or
after which applies the new functions)
·Transfer
bit rate: 48-192 kbps
•Sampling frequency: 32,44.1,48
kHz
Playable media
• CD-ROM, CD-R, CD-RW
~
•Depending on the writing software, it may not be
possible to use quick formatted CD-RW discs.
•When recording
to the media up to the maximum
capacity at once, the writing soft
is set to "Disc at once".
Playable disc format
• ISO 9660 Level 1/2
•Joliet
•Romeo
•Long file name.
The maximum number of characters for
display
File/Folder name:
KDC-X589: 128 characters
KDC-MP5028/MP528:
64 characters
8I English
MP3 ID3 Tag/ WMA Contents property/
AAC song information (KDC-X589 only): 30
characters
A
~
•File/Folder name is the number of the characters
including
the extensions.
•
MP3 ID3 Tag can only display the tag ofVerl.X. (KDC-
MPS028/MPS28 only)
•
AAC 103 Tag cannot be displayed.
Limitation of structure for the file and the
folder
•Maximum number of directory levels: 8
•Maximum
number of folders: 100
•Maximum
number of files per folder:
KDC-X589: 4096, KDCMP5028/MP528: 255
Playing order of the Audio file
The Audio file is played in the order which is written
by writing soft.
You may be able to set the playing
order by writing the play sequence numbers such
as "01" to "99" at the beginning of the file name.
Example
oCD (OJ) (]J: Folder
J>: Audio file
~CD
E.b®
Q]t~®
~®
GJ
l-~®
• Playing order
Playing orderafter Jy(J) play.
• J>@,J>®,J>0,J>® ...
• File search
Forward file search during Jy® play.
Push the Control knob to [~] • J>@
•Folder search
Forward folder search during Jy(j) play.
Push the Control knob to [FM] • CD, W ...
•Folder select
When it is set to directory{lJ, skip to the folder
before the same level
by folder select.
Push the Control knob to [I .... ] • OJ
When it is set to directory {lJ, makes the level up
by folder select.
Push the Control knob to [AM] • OJ

General features
~:;:::::~JI,xceloo Sy, .. mE',+ IKENWOOD)
4..it~
"OM
_O.ROM
~~II~Ec:::J~~ ~ ~ ~ G:J ~ ~o
ATT Release button Q/MENU
Control knob ANG
~1w~
ATT Release button VOL
Q/MENU
SRC Control knob ANG
Power
· .
• [='=I [='=I [='=I •
·- - _.
• [='=I [='=I [='=I •
·- - _.
• [='=I [='=I [='=I •
JATTI I LOUD I :sss:
'-------1------1----
ATT indicator LOUD indicator
Volume
Turning ONthe Power
Press the [SRC] button.
Turning OFF the Power
Press the [SRC] button for at least 1second.
Selecting the Source
Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Attenuator
Press the [SRC] button.
SIRIUS tuner (Optional accessory)
Tuner or HD Radio (Optional accessory)
CD
External disc (Optional accessory)
Auxiliary input*
Auxiliary input (Optional accessory)
Standby (lilurnination only rnode)
A
~
"SIRIUS"
"TUNER" or "HD RADIO"
"CD"
"CDCH"
"AUX"
"AUX EXT"
"STANDBY"
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed, the Attenuator
turns
ON and OFF.
When it's ON, the "An" indicator blinks.
•Function of the KDC -MPS028/MPS28,
English I9

General features
SystemQ Fader*4 "FAD"
Rear 15 - Front 15
You can recall the best sound setting preset for
different types
of music.
Exit Audio Control mode
A
~
0.5/1011.512.0 kHz
10.0/12.5/15.0/17.5 kHz
OFF/ON
1.0/2.0
1.00/1.25/1.5012.00
40/50/60170/80/100/
120/150 Hz
"B EX"
"BASQ"
Treble Center Frequency "TRE"
MiddleCenterFrequency'''MID F"
Treble level
Middle level
Middle Q Factor "MID Q"
Bass Q Factor
Bass Extend
• *1 You can control this item when "2Z0N" of <Audio
Setup> (page 11) is set to "ON"
• *2 You can control this item when <Switching preout>
(page 25) is set to "SWPRE SW". (KDC-MP5028/
MP528 only)
•*3 You can control this item when <Subwoofer
Output> (page 11) is set to "SW ON".
• *4 You can control this item when "2Z0N" of <Audio
Setup> (page 11) is set to "OFF".
• *5 These items can be adjusted in detail by the
following methods. (Function of the KDC-X589)
• *6 Source tone memory:The set up value is put in the
memory per source. (Detail Audio item is included)
5Exit Audio Control mode
Press any button.
Press the button which is not [VOL] knob and
[AD]! [ANG] button.
Adjust the detail of Audio Control
1Select
the Audio item for adjustment
By referring to the step 1- 3 above, select the
desired item
to be set in detail from the items
marked
with *5.
2Enter Detail adjustment mode of Audio
Control
Press the [VOL] knob for at least 1second.
3Select
the Detail Audio item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that
can be adjusted switch
as shown below.
4Adjust the Detail Audio item
Turn the [VOL] knob.
Bass.leve.l
"JAZZ"
"TO P40 "
"EASY"
"ROCK"
"POPS"
"NATURAL"
"USER"
-8-+8
-8-+8
-15-+15
Left 15 - Right 15
0-35
-8-+8
Subwoofer level*2.J.4
Treble level*5.6
Balance
Rear Volume *1
Bass level*5.6
Top 40
Natural
A
~
Easy
Middle level*5.6
Pops
User memory
Jazz
Rock
•User memory:The values set on the <Audio Control>
(page 10).
• Each setting value is changed with the <Speaker
Setting> (page 12).
First, select the speaker type with the Speaker setting.
Audio Control
1Select the source for adjustment
Press the [SRC] button.
2Enter Audio Control mode
Press the [VOL] knob.
3Select the Basic Audio item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch
as shown below.
4Adjust the Basic Audio item
Turn the [VOL] knob.
1Select the source to set
Press the [SRC] button.
2Select the Sound type
Press the [Q] button.
Each time the button is pressed, the sound
setting sWitches.
10 I English

Audio Setup
Setting the Sound system, such as Cross over
Network.
5Exit
the Detail Audio Control mode
Press the [VOL] knob for at least 1second.
~
~
• *2 You can control this item when "2l0N" of <Audio
Setup> (page 11) is set to "OFF".
• *3 KDC-X589/MP5028 only.
• *4 The Dual Zone System can be used with the
Auxiliary input sources shown below.
-Internal auxiliary input (KDC-MP5028/MP528 only)
-Option CA-C1AX (KDC-X589 only)
Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
-The channel of sub source is set up by <Dual Zone
System Setting> (page 25).
-Main source is selected by [SRC] button.
-The volume of Front channel is adjusted by [VOL]
knob.
-The volume of Rear channel is adjusted by <Audio
Control> (page 10)
-The Audio Control has no effect on sub source.
• You can control this item when <Switching preout>
(page 25) is set to "SWPRE SW". (KDC -MP5028/MP528
only)
• You can control this item when "2Z0N" of <Audio
Setup> (page 11) is set to "OFF".
Subwoofer Output
5Exit Audio Setup mode
Press [VOL] knob for at least 1second.
Turning the Subwoofer output ON or OFF.
Hold down on [AM] of the Control knob for at
least 1second.
Each time the button is pressed, Subwoofer
output switches ON and OFF.
When it's ON, "SW ON" is displayed.
~
Throughl 40*3/60*3/80/1001
120/ 150/1801220*3 Hz
Th roughI40*3160*3180/1 001
1201 150/1801220*3 Hz
Normal (0
0
)1 Reverse (180
0)
-8-±O
50*3160/801700*3/1201
Through Hz
Volume offset "V-OFF"
Subwoofer Phase*1.2 "PHAS"
Low Pass Filter*1.2 "LPF"
Rear High Pass Filter*) "HPR"
Front High Pass Filter*z "HPF';
•When the Bass Extend is set to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for [VOL], [AD] and [ANG]
buttons.
1Select the source for adjustment
Press the [SRC] button.
2Enter Audio Setup mode
Press the [VOL] knob for at least 1second.
3Select the Audio Setup item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch
as shown below.
4Setup the Audio item
Turn the [VOL] knob.
Loudness "LOUD" OFFION
Dual Zone System*4 "2Z0N"
OFFION
~
~
•Volume offset: Each source's volume can be set as a
difference from the basic volume.
Loudness: Compensating for low and high tones
during low volume.
When it's ON, "LOUD" indicator is ON.
• *1You can control this item when <Switching preout>
(page 25) is set to "SWPRE SW". (Function of the KDC-
MP5028/MP528)
• *1 You can control this item when <Subwoofer
Output> (page 11) is set to "SW ON".
English I 11

General features
Speaker Setting
Fine-tuning so that the System Qvalue is optimal
when setting the speaker type.
"FILE"
"P-TIME"
ffTITLE"*
"CLOCK"
"ALBUM"*
"FOLDER"
"FREQ"
"CLOCK"
"TITLE"*
"5T NAME""
Song title/ Artist name/
Album name/ Genre
Track number & Play time
Album name & Artist name
Folder name
Clock
File name
Frequency
Clock
SOng title & Aitisfname
In HD Radio source
In Audiofile source
" ";;SP OFF"
OFF
1Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2Enter Speaker Setting mode
Press the [VOL] knob.
3Select the Speaker type
Turn the [VOL] knob.
Each time the knob is turned, the setting
switches
as shown below.
For 5&4 in. speaker
For 6& 6x9 in. speaker
"SP 5/4"
"SP 6x9/6"
In SIRIUS tunersource
4Exit Speaker Setting mode
Press the [VOL] knob.
For the OEM speaker
"SPOEM"
Channelnilme
Song title
Artist name
"CH NAME"
"SONG"
"ARTIST"
Composer name
Category name
"COMPOSER"
"CATEGORY"
Switching Display
Label name
Comment
"LABEL'
"COMMENT"
In Auxiliary input source/ Standby source
Switching the information displayed.
1Enter Switching Display mode
Press the Control knob for at least 1second.
"DISP SEL" is displayed.
2Select the Display item
Push the Control knob to [~] or [~].
Band & Channel number
Clock
"CH NUM"
"CLOCK"
Station name or Frequency "SNPS"
Clock "CLOCK"
In Tuner source
A
~
•When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed. (KDC-XS89 only)
• * If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
•Track number at Audio file displays the last 3digits
when it exceeds 1000 songs (KDC-XS89 only).
•Album name cannot be displayed in WMA file. (KDC-
MPS028/MPS28 only)
•Song title, Artist name, and Album name cannot be
displayed in AAC file. (KDC-MPS028/MP528 only)
3Exit Switching Display mode
Press the Control knob.
"DNPS"
"P-TlME"
"D-TlTLE"*
"T-TITLE"*
"CLOCK"
Track number & Play time
Track title
Disc title
Disc name
Clock
Frequency "FREO"
In CD &Externaldisc source
12 I English

•Ifthe text for the Sirius tuner source, including
Channel name, etc.
is selected when the channel
which does
not have text for the Sirius tuner source,
including Channel name, etc.
is played, band &
channel number is displayed.
Station/Disc Naming (SNPS/DNPS)
Attaching atitle to a Station or CD.
1Receive/play the station/disc you want to
attach a title to
§
• A title can't be attached to MD or Audio file media.
2Enter Menu mode
Press the [MENU] button for at least 1second.
"MENU" is displayed.
3Select Name set mode
Push the Control knob to [FM] or [AM].
Select the "NAME SET" display.
4Enter Name set mode
Press the Control knob for at least 1second.
S Move the cursor to the enter character
position
Push the Control knob to [~] or [~].
6Select the characters
Push the Control knob to [FM] or [AM].
§Characters can be entered by using aremote
with a
numbers buttons.
Example: If
"DANCE" is entered.
•
Memory numbers
-Tuner:
30 stations
-Internal
CD player: 10 discs
-External
CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
•The title
of station/CD can be changed by the same
operation used
to name it
Faceplate Angle Adjustment
Press the [ANG] button for at least 1second.
~
~
•Do not apply excessive force to the faceplate. It can
cause damage.
"A"
"N"
liE"
[2]
[6]
[2]
[3]
2
3
2
7Repeat steps 5through 6and enter the name.
SExit Menu mode
Press the [MENU] button.
~
~
•When operation stops for 10 seconds the name at
that time
is registered, and Name Set mode closes.
English I13

General features
Theft Deterrent Faceplate
The faceplate of the unit can be detached and
taken with you, helping to deter theft.
Removing the Faceplate
Press the Release button.
The faceplate is unlocked, allowing you to detach
it.
Lh
•The faceplate is aprecision piece of equipment and
can be damaged by shocks or jolts. For that reason,
keep the faceplate in its special storage
case while
detached.
•Do
not expose the faceplate or its storage case to
direct sunlight or excessive heat or humidity. Also
avoid places
with too much dust or the possibility of
water splashing.
Reattaching the Faceplate
1Align the shaft on the unit with the
depression on the faceplate.
2Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to
use the unit.
14 IEnglish
TEL Mute
The audio system automatically mutes when a
call comes in.
When acall comes in
"CALL.:' is displayed.
The audio system pauses.
Listening to the audio duringacall
Press the [SRC] button.
The "CALL" display disappears and the audio
system comes back ON.
When the call ends
Hang up the phone.
The "CALL.:' display disappears and the audio
system comes back ON .

Tuner features
IKENWOOD)
O~@)~~I~I.!'~~~ ~~~F~~S_'~ ~
O.~~,9uP ~TO~~E ~~~ ~~E39l::;=i=:1==J=~~1
AUTO/AME 1 - 6 SRC
Band display
~ •••• ;=. =1==;-------:::=---:= .... ::-. ---.:=" ..... -. -~
.. . :.
: ~ :.
~.. •• ~ : G::l (:::=:)[::::1 :
..... "~h:~~~:
[ 'IIT __ I II I_~_~_~_=_~_=~~
ST indicator Frequency display Preset station number
Control knob
Tuning Tuning
Mode
Preset station seek "AUTO 2"
"MANUAL"
Manual
Choose the tuning mode.
Press the [AUTO] button.
Each time the button is pressed, theTuning
mode switches
as shown below.
Imfffiwi .
Auto seek "AUTO 1"
Selecting the station.
1Select tuner source
Press
the [SRC] button.
Select the "TUNER" display.
2Select the band
Push the Control knob to [FM] or [AM].
Each time the knob is pushed to [FMJ, it switches
between
the FM1, FM2, and FM3 bands.
3Tune up or down band
Push the Control knob to [~] or [~].
A
~
During reception of stereo stations the "ST" indicator
isON.
English I15

Tuner features
Function of remote
Direct Access Tuning
Entering the frequency and tuning.
1Select the band
Press the [FM] or [AM] button.
2Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"- - - -" is displayed.
3Enter the frequency
Press the number buttons on the remote.
txamplf:7:
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
Station Preset Memory
Putting the station in the memory.
1Select the band
Push the Control knob to [FM] or [AM].
2Select the frequency to put in the memory
Push the Control knob to [I .... ] or [~].
3Put the frequency in the memory
Press the desired [1] -[6] button for at least
2seconds.
The preset number display blinks 1time.
On each band, 1station can be put in the
memory on each
[1] - [6] button.
16 IEnglish
Auto Memory Entry
Putting stations with good reception in the
memory automatically.
1Select the band for Auto Memory Entry
Push the Control knob to [FM] or [AM].
2Open Auto Memory Entry
Press the [AME] button for at least 2seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry
closes.
Preset Tuning
Calling up the stations in the memory.
1Select the band
Push the Control knob to [FM] or [AM].
2Call up the station
Press the desired [1] -[6] button.

CD/Audio file/External disc control features
Track number Track time
~;==J.=I =~~=~~I~=----~
. .. . .
.:::. :. .... . .. ..: :
":... .. :. .
L: a· : 'r==J~c=:l'
I1
1
=-1 .. _·"" __ --.:A=F~=~=~~="R=:r_r=;~="~=G=EN=R=E:-.-l i!!!!!!:
IN indicator Play mode Disc number
Playing CD If Audio file
When there is no discinserted
1 Open the panel.
Press the [~] button.
2Insert adisc.
~
•When the faceplate has been slid open, it might
interfere with the shift lever or something else. If this
happens, pay attention
to safety and move the shift
lever or take
an appropriate action, then operate the
unit.
Insert the disc horizontal
to the slot. If you insert the
Disc
as you push down the Disc, it may scratch the
Disc.
~
~
• Refer to <About AAC, MP3 and WMA> (page8) for the
Audio file by models which
can be played.
•The announcement when selecting
the folder can be
canceled by <Voice Index> (page28) during
the play
.
of the ACDrive.
•When adisc
is inserted the "IN" indicator is ON.
When adiscis inserted
Press the [SRC] button.
Select the "CD" display.
Pause and play
Press the Control knob.
Each time the knob is pressed, it pauses and
plays.
Eject the disc
1Eject the disc
Press the [~] button.
2Return the panel to the original position
Press the [~] button.
English I17

CD/Audio file/External disc control features
Playing External Disc
Playing discs set in the optional accessory disc
player connected
to this unit.
Press the [SRC] button.
Select the display far the disc player yau want.
Display examples:
Function of disc changer/Audio file
Disc Search/Folder Search
Selecting the disc set in the Disc changer or the
folder recarded on the Audio file media.
Push
the Control knob to [FM] or (AM].
"CD CH"
"MDCH"
CD changer
MD changer
Function of remote
DirectTrack/File Search
Pause and play
Press the Control knob.
Each time the knab is pressed, it pauses and
plays.
A
~
•Disc lOis displayed as "0".
•The functions that can be used and the information
that can be displayed will differ depending on the
external disc players being connected.
Fast Forwarding and Reversing
Fast Forwarding
Hold down on [~] of the Control knob.
Release yaur finger ta play the disc at that paint.
Reversing
Hold down on [~] of the Control knob.
Release yaur finger ta play the disc at that paint.
~
·The sound is not output while the Audio file is being
searched.
•
Fast Forwarding and Reversing cannot be done while
AAC is being played. (KDC-MPS028/MPS28 only)
•
Fast Forwarding and Reversing cannot be done
depending on
AAC file format. (KDC-XS89 only)
Track/File Search
Searching far asong on the disc ar in the Audio
file folder.
Push the Control knob to [~] or [~].
18 IEnglish
Doing Track/File
Search by entering the track/file
number.
1Enter the track/file number
Press the number buttons on the remote.
A
~
•Direct File Search can be selected up to 999. (KDC-
XS89 only)
2 Do Track/File Search
Press the [~] or [~] button.
Canceling Direct Track/File Search
Press the (~II] button.
Function of disc changers with remote
Direct Disc Search
Doing Disc Search by entering the disc number.
1Enter the disc number
Press the number buttons on the remote.
2Do Disc Search
Press the (+] or (-] button.
Canceling Direct DiscSearch
Press the [~II] button.
~
• Input "0" to select disc 10.

Track/File/Disc/Folder Repeat Random Play
In CD &Externaldisc source
Replaying the song, disc in the Disc changer or
Audio file folder you're listening to.
Press the [REP] button.
Each time the button is pressed, the Repeat Play
switches as shown below.
Playing the first part of each song on the disc
or Audio file folder you are listening to and
searching for the song you want to listen to.
1 Start Scan Play
Press the [SCAN] button.
"TRAC SCN"/ "FILE SCN"/ "SCAN ON" is displayed.
2Release it when the song you want to listen
to is played
Press the [SCAN] button.
Track Repeat
Disc Repeat (In Disc Changer)
OFF
In Audio file source
File Repeat
Folder Repeat
OFF
Scan Play
"TRAC REP"
"DISC REP"
"REP OFF"
"FILE REP"
"FOLD REP"
"REP OFF"
Play all the songs on the disc or Audio file folder
in random order.
Press the [ROM] button.
Each time the button is pressed, Random Play
turns ON and OFF.
When it's ON, "DISC RDM"/ "FOLD RDM"/ "RDM
ON" is displayed.
~
•When the Control knob is pushed to [~], the next
random song starts.
Function of disc changer
Magazine Random Play
Play the songs on all the discs in the disc changer
in random order.
Press the [M.ROM] button.
Each time the button is pressed, the Magazine
Random Play turns ON and OFF.
When it's ON, "MGZN RDM" is displayed.
~
•When the Control knob is pushed to [~J. the next
random song starts.
Function of the KDC-X589
Function of Audio file
Disc Random Play
Playing randomly from all of the Audio files
recorded in the disc.
Press the [ROM] button for at least 1second.
When it's ON, "DISC RDM" is displayed.
Canceling the DiscRandom Play
Press the [ROM] button.
~
•When the Control knob is pushed to [~], the next
random song starts.
English I19

CD/Audio file/External disc control features
,'y'-~
:::t;·~~~~~
:sss:
:~E1S:
Function of the KDC-X589
Function of ACDrive disc
Switching the Play mode
By genre.
By the folder recorded in Disc.
By album.
PlaYlisiorder.
By artist.
•
•The category information of each song is the data
registered in Media Manager when ACDrive disc
is
being generated.
•The
announcement when the mode is switched can
be canceled by <Voice Index> (page
28).
•The advancement of the play mode information can
be selected
by [AM] and [FM] keys.
~
~
Arrange the playing orders of the songs by
categories.
Press the [S.MODEl button.
Each time the button is pressed, the Play mode
switches
as follows.
The play mode indicator
is o.~.
Function of Audio file
Folder Select
~
~
1Enter Folder Select mode
Press the [F.SEll button.
"F-SELECT" is displayed.
During Select
mode the folder information is
displayed as shown below.
Folder name display
Displays the current folder name.
I
•It doesn't function when <Disc Random Play> (page
19) isON.
2Select the folder level*
Push the Control knob to [FMl or [AMl.
With the
[FM] of the Control knob, you move
1level
down and with the [AM] of the Control
knob 1level up.
Selecting a
folder in the same level
Push the Control knob to [~l or [~l.
With the [~] of the Control knob, you move
to the previous folder, and with the
[~] of the
Control knob
to the next folder.
Returning
to the top level*
Press the [3] button.
~
Quickly selecting the folder you want to listen to.
• * You can operate when <Switching the Play mode>
(page 20) is set to "FOLDER" while playing ACDrive
disc. (KDC-X589 only)
3Decide the folder to play
Press the Control knob.
The Folder Select mode
releases, and the Audio
file in the folder being displayed
is played.
Canceling the FolderSelect mode
Press the [ESEll button.
20 I English