Kenwood KDV-5244U User manual

DVD-RECEIVER
KDV-5244U
KDV-5544U
KDV-4244
KDV-4544
INSTRUCTION MANUAL
© B64-4433-00/00 (EW/E2W)
B64-4433-0000EEnglish.indd1B64-4433-0000EEnglish.indd1 09.2.1010:08:21AM09.2.1010:08:21AM

2|KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544
Contents
Before use 3
For first use 7
Before using this unit for the first time
Language Setup
DSP Setup
Basic Operation of control panel 8
General functions
Tuner functions
DVD/ USB/ iPod play functions
Function Control/ Setup Menu 10
Clock/ Display Settings 14
Manual Clock Adjustment
Text Display Selection
AV Input Display Setting
Theft Deterrent Faceplate
Disc/ USB Operations of Remote
Control 16
Before Use
Playing a Disc
Playing a USB device
Basic Operation
Displaying Status and Control on-screen
DVD-VIDEO Disc Menu
DVD-VR Menu
Video CD PBC Menu
Zoom
Time Search
Direct Search
File Select
iPod Operations of Remote Control 20
Before Use
Playing the iPod
Search Mode
Music disc/Audio file/iPod Operation
of Control Panel 21
Music/Video Search
Music/Video Search for iPod
iPod Control by Hand Mode
Basic Operation of Disc Changer (Optional)
Tuner Operation 24
Auto memory entry
PTY (Program Type)
Program Type preset
Changing Language for PTY Function
Other Functions 26
Activating Security Code
Deactivating Security Code
Audio Adjustments 27
Audio Control
Audio Setup
Preset Equalizer Select
Manual Equalizer Control
Position Control
Cabin Selection
Speaker Setting
X’Over Setting
DTA (Digital Time Alignment) Setting
Audio Preset Memory
Audio Preset Recall
Basic Operations of Remote Control 32
Appendix 33
Accessories/ Installation Procedure 36
Connecting Wires to Terminals 37
Installation/Removing the Unit 39
Troubleshooting Guide 40
Specifications 42
About the functions by playback source
In this manual, functions that can be used with
various playback sources are indicated as follows:
DVD-VIDEODVD-VIDEO Function of DVD-VIDEO playback.
DVD-VRDVD-VR Function of DVD-VR playback.
Video CDVideo CD Function of Video CD playback.
CDCD Function of CD (CD-DA) playback.
Audio FileAudio File Function of Audio file playback.
MPEG/DivX®MPEG/DivX®
Function of Video file playback.
JPEGJPEG Function of JPEG file playback.
iPodiPod Function of iPod playback.
B64-4433-0000EEnglish.indd2B64-4433-0000EEnglish.indd2 09.2.1010:08:22AM09.2.1010:08:22AM

English |3
Before use
2WARNING
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
How to reset your unit
• If this unit or the connected unit (disc auto changer,
etc.) fails to operate properly, press the Reset button.
The unit returns to factory settings when the Reset
button is pressed.
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
¤
• Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe
them with a clean soft dry cloth.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
DVD player of the unit. Called lens fogging, this
condensation on the lens may not allow discs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
• The characters which can be displayed by this unit
are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } |
~ .
• The RDS feature won’t work where the service is not
supported by any broadcasting station.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Handling discs
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing discs from this unit, pull them out
horizontally.
• If the disc center hole or outside rim has burrs,
use the disc only after removing the burrs with a
ballpoint pen etc.
Discs that cannot be used
• Discs that are not round cannot be used.
• Discs with coloring on the recording surface or discs
that are dirty cannot be used.
• This unit can only play the CDs with .
This unit may not correctly play discs which do not
have the mark.
• You cannot play a disc that has not been finalized.
(For the finalization process refer to your writing
software, and your recorder instruction manual.)
B64-4433-0000EEnglish.indd3B64-4433-0000EEnglish.indd3 09.2.1010:08:22AM09.2.1010:08:22AM

4|KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544
Before use
List of playable discs
Disc
types
Standard Support Remark
DVD DVD Video ‡DTS not supported.
DVD Audio ×
DVD-R ‡MP3/WMA/WAV/JPEG/
MPEG/DivX Playback
Multi-border/Multisession/
(Playback depends on
authoring conditions)
Video mode supported
VR mode supported (Only
DVD-R/RW)
DVD-RW ‡
DVD+R ‡
DVD+RW ‡
DVD-R DL (Dual layer) ‡Only video format
DVD+R DL (Double layer) ‡
DVD-RAM ×
CD Music CD ‡CD-TEXT
CD-ROM ‡MP3/WMA/WAV/JPEG/
DivX playback
Multisession supported
Packet write not supported.
CD-R ‡
CD-RW ‡
DTS-CD ×
Video CD (VCD) ‡
Super video CD ×
Photo CD ×
CD-EXTRA %Only music CD session can
be played.
HDCD %Sound quality of normal
CD music
CCCD ×
Others DualDisc ×
Super audio CD %Only CD layer can be
played.
‡: Playback is possible.
%: Playback is partly possible.
× : Playback is impossible.
⁄
• When buying DRM enabled contents, check the
Registration Code in the <DivX registration> (page 13).
Registration Code changes each time a file with the
displayed Registration Code is played to protect against
copying.
Use of “DualDisc”
When playing a “DualDisc” on this unit, the surface of
the disc that is not played may be scratched while the
disc is inserted or ejected. Since the music CD surface
does not conform to the CD standard, playback may
be impossible.
(A “DualDisc” is a disc with one surface containing
DVD standard signals and the other surface
containing music CD signals.)
About Audio files
• Playable Audio file
MP3 (.mp3), WMA (.wma), Linear PCM (WAV) (.wav)
⁄
• If music of normal CD and other playback systems are
recorded in the same disc, only the playback system
recorded at the first setout is played.
• Acceptable media
CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB
device, iPod with KCA-iP240V/ KCA-iP101
• Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo.
• USB device Playable Model
KDV-5244U/ KDV-5544U
• Playable USB device file system
FAT32, FAT16
• iPod Playable Model
KDV-5244U/ KDV-5544U
Although the audio files are complied with the standards
listed above, the play maybe impossible depending on
the types or conditions of media or device.
• Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from ①to ⑩.
v
<
(): Root
< : Folder
v : Audio file

v

v
v
v.
v
v


v

v
v
v.
v
Folder
Root
Audio file
An online manual about audio files is put on the
site, www.kenwood.com/audiofile/. On this online
manual, detailed information and notes which are
not written in this manual are provided. Make sure
to read through the online manual as well.
About Video files
• Acceptable video files
MPEG1, MPEG2, DivX
• Extensions
mpg, mpeg, divx, div, avi
• Acceptable media
CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB
device, iPod with KCA-iP240V
B64-4433-0000EEnglish.indd4B64-4433-0000EEnglish.indd4 09.2.1010:08:23AM09.2.1010:08:23AM

English |5
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See <About Audio files>.
About Picture files
• Acceptable picture files
JPEG
• Extensions
jpg, jpeg
• Acceptable media
CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB
device
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See <About Audio files>.
iPod/iPhone that can be connected to this
unit
Made for
• iPod nano (1st generation) • iPod nano (2nd generation)
• iPod nano (3rd generation) • iPod nano (4th generation)
• iPod with video • iPod classic
• iPod touch (1st generation) • iPod touch (2nd generation)
Works with
• iPhone • iPhone 3G
• Update iPod/iPhone software to the latest version.
• You can control an iPod/iPhone from this unit by
connecting an iPod/iPhone (commercial product)
with Dock connector using an optional accessory
iPod connection cable (KCA-iP240V/ KCA-iP101). The
word “iPod” appearing in this manual indicates the
iPod/iPhone connected with the KCA-iP240V/ KCA-
iP101 (optional accessory).
• By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable (KCA-
iP240V/ KCA-iP101), you can supply power to your
iPod/iPhone as well as charge it while playing music.
However, the power of this unit must be on.
⁄
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
• You cannot operate iPod if “KENWOOD” or “✓” is
displayed on the iPod.
• A video file stops playing if you switch to another
source while playing it. You cannot play from the
last playback position if you switch back to iPod.
About USB device
• In this manual, the word “USB device”is used for
flash memories and digital audio players which have
USB terminals.
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• You cannot connect a USB device via a USB hub and
Multi Card Reader.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
About DivX
DivX is a popular media technology created by DivX,
Inc. DivX media Files contain highly compressed video
with high visual quality that maintains a relatively
small file size. DivX files can also include advanced
media features like menus, subtitles, and alternate
audio tracks. Many DivX media files are available for
download online, and you can create your own using
your personal content and easy-to-use tools from
DivX.com.
About DivX Certified
DivX Certified products are officially tested by the
creators of DivX and guaranteed to play of DivX video,
without DivX 6.
Certified products qualify for one of several DivX
Profiles that designate the type of video the product
supports, from compact portable video to high-
definition video.
B64-4433-0000EEnglish.indd5B64-4433-0000EEnglish.indd5 09.2.1010:08:23AM09.2.1010:08:23AM

6|KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the
following map.
Operation regulatory marks
With this DVD, some functions of this unit such as the
play function may be restricted depending on the
location where the DVD is playing. In this case, the
following marks will appear on the screen. For more
information, refer to the disc manual.
Prohibition Mark
Discs with limited period of use
Do not leave discs with a limited period of use in this
unit. If you load an already expired disc, you may not
be able to remove it from this unit.
1
2
4
1
5
4
5
2
1
2
6
3
DVD disc marks
Symbol Description
ALL
Indicates a region number. The discs with this mark can
be played with any DVD player.
8
Indicates the number of audio languages recorded. Up
to 8 languages can be recorded in a movie.You can
select a favorite language.
32
Indicates the number of subtitled languages recorded.
Up to 32 languages can be recorded.
9
If a DVD disc has scenes shot from multiple angles, you
can select a favorite angle.
16:9 LB
Indicates the type of screen for the image. The left mark
indicates that a wide image picture (16:9) is displayed
on a standardTV set screen (4:3) with a black band at
both the top and bottom of the screen (letter box).
Before use
B64-4433-0000EEnglish.indd6B64-4433-0000EEnglish.indd6 09.2.1010:08:23AM09.2.1010:08:23AM

English |7
For first use
Language Setup
Set a language used for screen display, DVD subtitles,
etc.
• “Language”item of the Setup menu (page 13)
DSP Setup
To get clear sound, set the sound environment
according to the location and size of physically
installed speakers with reference to the followings:
• “MENU” > “SWPRE” of <Function Control> (page 11)
• Cabin selection (page 29)
• Speaker Setting (page 29)
• DTA (Digital Time Alignment) setting (page 30)
• X’Over setting (page 30)
⁄
• Setting “DSP SET” to “BYPASS” disables the settings related
to the DSP function. Refer to “DSP” > “DSP SET” of <Function
Control> (page 12).
Before using this unit for the first
time
Demonstration mode setting
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
Demonstration mode setting.
Display Setting
“DEMO ON” The Demonstration mode function is ON.
“DEMO OFF” Cancel Demonstration mode (Normal mode).
Selecting Russian Characters*1
If necessary, select Russian as a text display language.
Display Setting
“RUS ON” Displays texts using Russian characters.
“RUS OFF” Displays texts using European characters.
1Select Standby
Press the [SRC] button.
Select the “STANDBY” display.
2Enter Function Control mode
Press the [ ] button for at least 1 second.
“FUNCTION” is displayed.
3Enter Menu mode
Turn the [AUD] knob to select “MENU”.
Press the [AUD] knob.
4Set the Demonstration mode
Turn the [AUD] knob to select “DEMO”.
Press the [AUD] knob for at least 2 seconds.
Select the “DEMO OFF” display.
5Set the Russian Character*1
Turn the [AUD] knob to select “RUS”.
Press the [4] or [¢] button.
6Exit Function Control mode
Press the [ ] button for at least 1 second.
7Turning OFF the Power
Press the [SRC] button for at least 1 second.
⁄
• *1Function of KDV-5544U/ KDV-4544
• These settings can be changed later.
B64-4433-0000EEnglish.indd7B64-4433-0000EEnglish.indd7 09.2.1010:08:23AM09.2.1010:08:23AM

8|KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544
General functions
Power/Source Select button: [SRC]
Turns on the power.
When the power is on, the source switches between
Tuner (“TUNER”), USB*1or iPod*1(“USB” or “iPod”), DVD
(“DVD”), AV input (“AVIN”), and Standby (“STANDBY”)
each time this button is pressed.
Press at least 1 second to turn off the power.
⁄
• When an optional accessory is connected, the source name
for each device appears.
Volume control: [AUD] knob
Turn the knob to adjust the volume.
Subwoofer output: [AM–]
Switches between ON (“SW ON”) and OFF (“SW OFF”)
each time this button is pressed for at least 2 seconds.
⁄
• You can do this function when “SWPRE”in <Function
Control> (page 11) is set to “SW”.
AV input
Connect an external player such as a digital audio
player to AV IN jack. Use of the optional cable CA-
C3AV is recommended for connecting an external
player.
⁄
• The AV input requires the setting made in “MENU” > “AVIN”
of <Function Control> (page 11).
Switching display: [DISP]
Changes the information displayed. Refer to page 14
for the details of the display setting.
Text/Title scroll: [DISP]
Scrolls the text display of a CD, audio files or Radio
text when pressed for at least 1 second.
Muting volume upon reception of phone call
When there is a call, “CALL” is displayed and the audio
system is paused.
When the call ends, “CALL” disappears and the audio
system comes back on.
The audio system also comes back on when [SRC] is
pressed during a call.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
37).
Tuner functions
FM band: [FM+]
Switches between FM1, FM2, and FM3 each time the
[FM+] button is pressed.
AM band: [AM–]
Switches to AM.
Tuning: [4]/ [¢]
Changes the frequency.
⁄
• Use the “MENU” > “AUTO1”/ “AUTO2”/ “MANUAL” in
<Function Control> (page 10) to change the frequency
switching.
• During reception of stereo stations the“ST” indicator is ON.
Preset memory: [1] - [6]
Memorizes the station selected when pressing for at
least 2 seconds.
Preset tuning: [1] - [6]
Recalls the memorized station.
Traffic information: [FM+]
Turns ON or OFF the Traffic Information function
when pressing for at least 2 seconds. When the
function is turned ON, “TI” indicator is ON.
Basic Operation of control panel
[DISP] [AUD][ ] [1] [2] [3] [4] [5] [6]
[] [D]
[]
[FM+] [AM–]
[SRC] Release
AV input
USB Terminal*1
Disc slot
B64-4433-0000EEnglish.indd8B64-4433-0000EEnglish.indd8 09.2.1010:08:23AM09.2.1010:08:23AM

English |9
If traffic bulletin starts when the function is ON,
“TRAFFIC” is displayed and traffic information is
received.
⁄
• If the volume is adjusted during reception of traffic
information, the adjusted volume is memorized
automatically. The memorized volume will be applied next
time the Traffic Information function is turned ON.
DVD/ USB/ iPod play functions
Disc play: Disc slot
Starts playing when a disc is inserted.
When a disc is inserted, the “IN” indicator is ON.
⁄
• Do not attempt to insert a disc into the slot if another one
is already there.
• The unit can only play 12 cm (5 inch) discs. If you insert an
8 cm (3 inch) disc, it will get stuck inside and can cause the
unit to malfunction.
Disc ejection: [0]
⁄
• You can eject the disc for 10 minutes after switching off the
engine.
USB device/iPod play*1: USB Terminal
Connecting a USB device starts playback.
⁄
• For the playable audio file, video file, media, and devices,
refer to <About Audio file> (page 4), <About Video file>
(page 4).
USB device/ iPod removing*1
To disconnect the USB device/ iPod, stop the playback
by pressing the [1] button, and then disconnect the
USB device/ iPod.
Pause and play: [6]
Switches between pause and play each time this
button is pressed.
Stops playing: [1]
Track/File search: [4]/ [¢]
Changes the chapter/ track/ file when this button is
pressed.
Fast reverses or forwards the music while pressing.
Pressing these buttons for 5 seconds or longer
accelerates the speed of fast-forward or fast-reverse.
⁄
• For the iPod, the fast-forward or reverse speed does not
change.
Title/ Folder search DVD-VIDEODVD-VIDEO DVD-VRDVD-VR Audio FileAudio File
MPEG/DivX®MPEG/DivX®
JPEGJPEG : [FM+]/ [AM–]
Changes the title/ folder.
Search mode Audio FileAudio File CDCD
MPEG/DivX®MPEG/DivX® JPEGJPEG iPodiPod
: [ ]
After pressing this button, you can quickly search
songs with the [AUD] knob. See <Music/Video
Search> (page 21) for details.
Changing the audio channel Video CDVideo CD : [2]
Changes the audio channel when this button is
pressed.
Repeat play: [4]
Each time you press the button, the Repeat Play
alternates between the modes.
DVD-VIDEODVD-VIDEO Chapter Repeat (“CHAP REP”), Title Repeat
(“TITL REP”) and OFF (“REP OFF”)
DVD-VRDVD-VR Chapter Repeat (“CHAP REP”), Program
Repeat (“PRG REP”) and OFF (“REP OFF”)
Video CDVideo CD
CDCD
Track Repeat (“TRAC REP”) and OFF (“REP
OFF”) (Video CD: PBC Off)
Audio FileAudio File
MPEG/DivX®MPEG/DivX®
File Repeat (“FILE REP”), Folder Repeat (“FOLD
REP”), and OFF (“REP OFF”)
JPEGJPEG Folder Repeat (“FOLD REP”) and OFF (“REP
OFF”)
iPodiPod File Repeat (“REP ONE”), All Repeat (“REP ALL”),
and OFF (“REP OFF”)
Random play Video CDVideo CD Audio FileAudio File CDCD
MPEG/DivX®MPEG/DivX® iPodiPod
: [3]
Randomly plays the track/ file in the disc or folder.
When Random Play is turned on, “DISC RDM”/ “FOLD
RDM” is displayed.
⁄
• iPodiPod : Disabled when VIDEO is being played.
All Random play Audio FileAudio File
MPEG/DivX®MPEG/DivX® iPodiPod : [3]
If you press this button for at least 3 seconds while
playing a file, all files in the media play at random
(“ALL RDM”).
Pressing the button again turns the random play off
(“RDM OFF”).
⁄
• The time required to turn on the all random function may
become longer depending on the number of songs in iPod
or the folder structure.
• iPodiPod : Turning on the all random function changes
the iPod browse item to “songs”. This browse item will not
change even if the all random function is turned off.
• iPodiPod : If the brows item is changed to search for
music while the all random function is on, the all random
function is turned off and the songs in the browse item are
played at random.
*1Function of KDV-5244U/KDV-5544U.
B64-4433-0000EEnglish.indd9B64-4433-0000EEnglish.indd9 09.2.1010:08:24AM09.2.1010:08:24AM

10 |KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set during DVD source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AV IN or AUX source.
: Can be set for sources other than the standby
source by setting “2ZON” of <Audio Setup> (page
27) to “ON”.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
*Factory setting
*1Function of KDV-5244U/ KDV-5544U
*2Function of KDV-5544U/ KDV-4544
Function Control/ Setup Menu
Function Control
Functions in the table below can be set up by using Function Control.
1Enter Function Control mode
Press the [ ] button for at least 1 second.
“FUNCTION” is displayed.
2Select your desired setup item
Operation type Operation
Movement between items Turn the [AUD] knob.
Selection of item Press the [AUD] knob.
Return to previous item Press the [ ] button.
Repeat selection and determination until your
desired setup item is selected.
In this manual, the above selection is indicated as
Press [ ] 1sec., and select “MENU” >“ICON”.
Category Function of setup item Condition
“iPodCTRL”*1Allows you to set up iPod Control by Hand
Mode.
“DSP” Allows you to set up the sound environment.
“MENU” Allows you to set up the environment. —
“RETURN” Exit Function Control mode. —
3Make a setting
Press the [AUD] knob or turn the [AUD] knob to
select a setting value, and then press the [AUD]
knob.
• The value of items with [AUD] mark can be set by
pressing the [AUD] knob.
• The value of items with [4/ ¢] mark can be
set by pressing the [4] or [¢] button.
• Some items require you to keep pressing the
[AUD] knob for 1 or 2 seconds to set. For these
items, the time during which you need to keep
pressing the [AUD] knob is displayed in the Entry
column in seconds.
4Exit Function Control mode
Press the [ ] button for at least 1 second.
“MENU”
Item Setting Entry Setting overview Condition Page
“CODE SET”/
“CODE CLR”
1 sec. Sets/Resets security code. 26
“SYNC” “OFF”/“ON”*
4 / ¢
Synchronizes the RDS station time data and this unit’s clock. —
“DIM” “OFF”*/“ON”
4 / ¢
Adjusts the brightness of the display according to the
surrounding illumination.
——
B64-4433-0000EEnglish.indd10B64-4433-0000EEnglish.indd10 09.2.1010:08:26AM09.2.1010:08:26AM

English |11
Item Setting Entry Setting overview Condition Page
“ICON” “OFF”/“ON1”/
“ON2”*
4 / ¢
Sets the Graphics mode of the display. 34
“SWPRE” “R”*/“SW”/“AV”
4 / ¢
Sets the preout output. 34
“ZONE2” “F”/“R”*
4 / ¢
Specifies the destination of sub source sound when the Dual
Zone function is turned on.
34
“NEWS” “OFF”*/“00M”–
“90M”
4 / ¢
Turns ON/OFF the News Bulletin Automatic Reception function
and sets the news bulletin interrupt disabled time.
34
“LO.S” “OFF”*/“ON”
4 / ¢
Searches stations with good reception in auto seek tuning. —
“AUTO1”/“AUTO2”/
“MANUAL”
“AUTO1”*/“AUTO2”/
“MANUAL”
4 / ¢
Selects the tuning mode of the radio. 33
“A-MEMORY” 2 sec. Memorizes six stations with good reception automatically. 24
“AF” “OFF”/“ON”*
4 / ¢
When station reception is poor, automatically switches to the
station that is broadcasting the same program over the same RDS
network.
33
“REG” “OFF”/“ON”*
4 / ¢
Sets whether to switch to the station only in the specific region
using the “AF” control.
—
“ATPS” “OFF”/“ON”*
4 / ¢
When traffic information station reception is poor, automatically
searches for a station that can be received better.
—
“MONO” “OFF”*/“ON”
4 / ¢
Reduces the noise when stereo broadcasts are received as
monaural.
—
“NAME SET” 1 sec. Sets the display when switched to AV IN or AUX source. 15
“RUS”*2“OFF”/“ON”*
4 / ¢
Selects Russian as the display language. You have to turn the
power off after the setting is changed.
34
“M/V” Displays the firmware version of Microvision. —
“ABOOK”*1“SL”/ “NM”/ “FA”
4 / ¢
Sets the audio book playback speed. —
“SKIP”*1“0.5%”*/ “1%”/
“5%”/“10%”
4 / ¢
Sets the ratio of skip performed with <Music/Video Search for
iPod>.
21
“iART”*1“OFF”/“ON”*
4 / ¢
Specifies whether or not the artworks of the music files are
displayed.
—
“FILETYPE” >“DISC”
>“USB”*1
“A/V”/“PIC”
4 / ¢
Selects playback file type when a disc or USB contains different
types of files.
You can make advanced settings in the “FILE TYPE” of the Setup
menu. “A”or “V” may appear on the display after setting.
13
“SCL” “AUTO”/“MANU”*
4 / ¢
When set to “AUTO”, scrolls the screen once with the change of
the displayed text.
——
“AVIN” “OFF”/“ON1”*/
“ON2”
4 / ¢
Sets whether to display AV IN during source selection. 33
“OFF” “---”/“20M”*/
“40M”/“60M”
4 / ¢
Turns off the power when the preset time has lapsed in the
Standby mode.
34
“DEMO” “OFF”/“ON”* 2 sec. Specifies whether to enable demonstration. —7
“iPodCTRL”
Item Setting Entry Setting overview Condition Page
“iPodCTRL”*1“HANDS ON”/
“MODE OFF”* AUD When set to “HANDS ON”, allows you to operate iPod with the
control on the iPod.
22
Next page 3
B64-4433-0000EEnglish.indd11B64-4433-0000EEnglish.indd11 09.2.1010:08:26AM09.2.1010:08:26AM

12 |KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544
5Press the [5]/[∞] button to select the desired
item, and then press the [ENTER] button.
To cancel pop-up menu, press the [RETURN]✍
button.
6Press the [5]/[∞] button to select the desired
setting, and then press the [ENTER] button to
confirm your selection.
7Exit Setup menu mode
Press the [SETUP] button.
The Setup menu ends.
⁄
• The memory cannot be erased by the Reset button.
*1Function of KDV-5244U/ KDV-5544U
Function Control/ Setup Menu
“DSP”
Item Setting Entry Setting overview Condition Page
“CONTROL” “EQ” [AUD] Sets the sound quality. 27
“B.BOOST” “OFF”*/
“STEP1”/“2” AUD Sets the Bass Boost level in two steps. —
“HIGHWAY” “OFF”/
“STEP1”/“2”/
“3”*/“4”
AUD Compensates the low volume or bass sound being lost by road
noises to make vocal sound clearer.
34
“POSITION” [AUD] Compensates the sound environment in accordance with the
listening position.
28
“SETUP” “CABIN” [AUD] Selects the car type to compensate the distance difference
between each speaker.
29
“SPEAKER” [AUD] Sets the connected speaker, speaker size, and installation
position.
29
“DTA” [AUD] Makes fine adjustment of the compensation value specified at
Cabin.
30
“X’OVER” [AUD] Makes fine adjustment of the X’Over value specified at Speaker. 30
“PRESET” “RECALL” [AUD] Registering the value setup by Sound Control. Recalling the
sound setup registered by <Audio Preset Memory>.
31
“MEMORY” [AUD] Registering the value setup by Sound Control. 31
“DSP SET” “BYPASS”/
“THROUGH”* AUD Setting “BYPASS” passes the DSP function.
Setting “THROUGH” activates the DSP function.
—
1Select DVD or USB source
Press the [SRC] button.
Select the “DVD” or “USB”*1display.
2Press the [7] button.
3Enter Setup menu mode
Press the [SETUP] button.
4Press the [2]/[3] button to select the menu.
LANGUAGE/ PICTURE/ AUDIO/ OTHER
Setup menu of remote control
By using the Setup menu, you can make various adjustments to items such as picture and sound. You can
also set a language for the subtitles and the Setup menu, among other things.
B64-4433-0000EEnglish.indd12B64-4433-0000EEnglish.indd12 09.2.1010:08:27AM09.2.1010:08:27AM

English |13
LANGUAGE
Item Setting
MENU LANGUAGE/
AUDIO LANGUAGE
Selects the initial disc menu language and audio language.
Refer to the language code list (page 35).
SUBTITLE Selects the initial subtitle language or remove the subtitle (OFF). Refer to the language code list (page 35).
ON SCREEN
LANGUAGE
Selects a language for the setup menu and on screen display.
PICTURE
Item Setting
MONITOR TYPE • 16:9: Select when a 16:9 wide TV is connected.
• 4:3 LETTERBOX: Select when a standard 4:3 TV is connected. Displays a wide picture with bands on the
upper and lower portions of the screen.
• 4:3 PAN SCAN: Select when a standard 4:3 TV is connected. Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
OSD POSITION Selects the on-screen bar position on the monitor.
• 1: Higher position.
• 2: Lower position (Guidance below the disc setup menu will disappear.)
iPod ARTWORK*1• ON: Displays the artwork of your iPod.
• OFF: Does not display the artwork of your iPod.
AUDIO
Item Setting
DOWN MIX • SURROUND COMPATIBLE: Uses multi-channel surround audio by connecting an amplifier compatible with
Dolby Surround.
• STEREO: Normally select this.
D.RANGE
COMPRESSION
You can enjoy a powerful sound at low or middle volume levels while playing a Dolby Digital software.
• AUTO: Applies the effect to multi-channel encoded software (excluding 1-channel and 2-channel software).
• ON : Uses this function always.
OTHER
Item Setting
DivX REGISTRATION This unit has its own Registration Code. Once you have played back a disc in which the Registration Code
recorded, this unit’s Registration Code is overwritten for copyright protection.
1. Press the [ENTER] button to show Code.
2. Press the [ENTER] button to exit.
⁄
• When downloading a DivX VOD file controlled by DRM, register the code appeared on the screen such as
the one above. Otherwise the file may not be able to play with this unit. Remaining number of viewing
is displayed when playing a DivX VOD file with the viewing restriction. When the remaining number of
viewing reached 0, a warning message appears and the file cannot be played.
FILE TYPE (DISC)/
FILE TYPE (USB)*1
Selects playback file type when a disc or USB contains different types of files.
• AUDIO: Play Audio file (MP3, WMA, WAV).
• STILL PICTURE: Play JPEG file.
• VIDEO: Play Video file (MPEG, DivX).
• AUDIO+VIDEO: Play Audio or Video file.
B64-4433-0000EEnglish.indd13B64-4433-0000EEnglish.indd13 09.2.1010:08:28AM09.2.1010:08:28AM

14 |KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544
In Audio file/ Video file/ JPEG file source
Information Display
Title & Artist name “TITLE”*1
Album name & Artist name “ALBUM”*1
Folder name “FOLDER”
File name “FILE”
Play time & File number*1“P-TIME”
Clock “CLOCK”
*1“JPEG” is displayed when a file is JPEG.
In iPod source
Information Display
Music title & Artist name “TITLE”
Album name & Artist name “ALBUM”
Play time & Music number “P-TIME”
Clock “CLOCK”
In Standby/ AV input source
Information Display
Source name “SRC NAME”
Clock “CLOCK”
Select the text
Press the [DISP] button.
⁄
• When you select the clock display, the display setting of
each source will be changed to the clock display.
• If the selected display item does not have any
information, alternative information is displayed.
• If the iPod Control by Hand Mode is set to on while
playing the iPod, “iPodMODE” is displayed.
Clock/ Display Settings
Text Display Selection
Changing displayed information on each source
following;
In Tuner source
Information Display
Program Service name (FM) “FREQ/PS”
Radio text (FM) “R-TEXT”
Frequency (MW, LW) “FREQ”
Clock “CLOCK”
In DVD/ Video CD source
Information Display
Title number & Chapter number/
Program number & Chapter number
“TNO : CNO”*1
“PNO : CNO”*1
Track number & Play time*2“P-TIME”
Clock “CLOCK”
*1DVD-VIDEO or DVD-VR only
*2Track number and play time are not displayed with
Video CD PBC On.
In CD & External disc source
Information Display
Disc title “D-TITLE”
Track title “T-TITLE”
Play time &Track number “P-TIME”
Clock “CLOCK”
Manual Clock Adjustment
1Select the Clock display
Press the [DISP] button.
2Enter Clock adjustment mode
Press the [DISP] button for at least 1 second.
The clock display blinks.
3Adjusting Clock
Operation type Operation
Adjust the hours Press the [FM+] or [AM–] button.
Adjust the minutes Press the [
4 ] or [ ¢ ] button.
4Exit Clock adjustment mode
Press the [DISP] button.
⁄
• You can do this adjustment when “SYNC” in <Function
Control> (page 10) is set to “OFF”.
B64-4433-0000EEnglish.indd14B64-4433-0000EEnglish.indd14 09.2.1010:08:28AM09.2.1010:08:28AM

English |15
AV Input Display Setting
Selecting the display when changing to AV IN or
AUX source.
1Select AV IN source
Press the [SRC] button.
Select the “AVIN” display.
2Enter AV input display setting mode
Press [ ] 1 sec., and select “MENU” >“NAME
SET”.
Press the [AUD] knob for at least 1 second.
The presently selected AV input display is displayed.
• For how to select Function Control items, refer to
<Function Control> (page 10).
3Select the AV input display
Turn the [AUD] knob.
“AVIN”/ “DVD”/ “PORTABLE”/ “GAME”/ “VIDEO”/ “TV”
4Exit AV input display setting mode
Press the [ ] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the AV input display setting mode
closes.
• The AV input display can be set only when the built-in
AV input or the auxiliary input of optional KCA-S220A
is used. On the KCA-S220A, “AUX EXT” is displayed by
default.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and
taken with you, helping to deter theft.
Removing the Faceplate
Press the Release button.
The faceplate unlocks, allowing you to detach it.
¤
• The faceplate is a precision piece of equipment and can
be damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not expose the faceplate (and the faceplate case) to
direct sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
• To prevent deterioration, do not touch the terminals of
the unit or faceplate with your fingers.
Reattaching the Faceplate
Refer to the following diagram when
reattaching the faceplate.
B64-4433-0000EEnglish.indd15B64-4433-0000EEnglish.indd15 09.2.1010:08:28AM09.2.1010:08:28AM

16 |KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544
Disc/ USB Operations of Remote Control
Before Use
• Turn on the monitor to watch the playback picture.
If you turn on the monitor, you can also control
playback of other discs by referring to the monitor
screen.
• Set the remote controller mode switch to “DVD”
mode before starting operation, refer to <Remote
Controller mode switch> (page 32).
Fast Forwarding or Fast Backwarding
Press the [1] or [¡] button repeatedly to
select the required speed.
x2, x5, x10, x20, x60
DVD-VIDEODVD-VIDEO DVD-VRDVD-VR Video CDVideo CD CDCD
Audio FileAudio File
1, 2, 3
MPEG/DivX®MPEG/DivX®
Slow Forwarding or Backwarding
DVD-VIDEODVD-VIDEO DVD-VRDVD-VR
Video CDVideo CD
1 Press the [38] button to pause.
2 Press the [1] or [¡] button repeatedly to
select the required speed.
1/32, 1/16, 1/8, 1/4, 1/2
⁄
• Slow motion playback in reverse is not possible with
DVD-VR or Video CDs.
Forward frame-by-frame playback
DVD-VIDEODVD-VIDEO DVD-VRDVD-VR
Video CDVideo CD
1 Press the [38] button to pause.
2 Press the [¢] button.
5 minutes skip
MPEG/DivX®MPEG/DivX®
Press the [2] or [3] button.
Skips from the head of a file at five-minute intervals.
Example: 1:23 =5:00 =10:00
⁄
• The operation is enabled when the Status and Control
bars are not displayed.
Camera angle
DVD-VIDEODVD-VIDEO
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
Press the [ANGLE] button repeatedly during
playback to select a desired angle.
The number of the current angle appears on the
display.
Subtitles
DVD-VIDEODVD-VIDEO DVD-VRDVD-VR
MPEG/DivX®MPEG/DivX®
Press the [SUBTITLE] button repeatedly
during playback to see the different subtitle
languages.
Changing the audio stream
DVD-VIDEODVD-VIDEO DVD-VRDVD-VR
MPEG/DivX®MPEG/DivX®
Press the [AUDIO] button repeatedly during
playback to hear a different audio stream.
Changing the audio channel
Video CDVideo CD
Press the [AUDIO] button repeatedly during
playback to hear a different audio channel
(STEREO, Left or Right).
Playing a Disc
Inserting a disc in the unit
“READING” appears on the display, and playback
starts automatically.
If playback does not start, press [✍38].
In some cases, the disc menu might appear✍
instead.
⁄
• The menu screen may be displayed first after loading a DVD
or Video CD 2.0 which offers a menu.
• DVDs may have a region code. Your player does not play
discs that have a region code different from your player.
About the region code, refer to Region code (page 6).
• The playback file may be different depending on the file
type set for Audio, Video and JEPG files. (page 13)
Playing a USB device
(KDV-5244U/ KDV-5544U)
Connecting the USB device
For a USB device that includes audio files, video
files, or photo files,“READING” appears in the
display, and playback starts automatically.
⁄
• The playback file may be different depending on the file
type set for Audio, Video and JEPG files. (page 13)
Basic Operation
Playing or pausing
Press the [38] button.
Stopping the play
Press the [7] button.
Searching for a chapter/ scene/ track/ file
Press the [4] or [¢] button.
Selecting a title/ folder
DVD-VIDEODVD-VIDEO DVD-VRDVD-VR
MPEG/DivX®MPEG/DivX®
JPEGJPEG Audio FileAudio File
Press the [FM+] or [AM–] button.
B64-4433-0000EEnglish.indd16B64-4433-0000EEnglish.indd16 09.2.1010:08:29AM09.2.1010:08:29AM

English |17
Displaying Status and Control
on-screen DVD-VIDEODVD-VIDEO DVD-VRDVD-VR Video CDVideo CD
MPEG/DivX®MPEG/DivX® JPEGJPEG
You can display various information about the disc
loaded on-screen.
Example: DVD-VIDEO
Status bar
Control bar
Status bar
1Disc type
2DVD: Audio signal format type and channel
Video CD: PBC
3Playback mode
“T.RPT” (Title/ Track repeat), “C.RPT” (Chapter
repeat), “PG.RPT” (Program repeat), “F.RPT”
(Folder repeat)
“F.RND” (Folder random), “A.RND” (All random)
4Playback information
“T” (Title/ Track), “C” (Chapter), “PG” (Program),
“PL” (Play list), “F” (Folder/ File)
5Time indication
6Playback status
“3” (Play), “8” (Pause), “7” (Stop), “¡”/”1”
(Forward/reverse search), “ ”/” ” (Forward/
reverse slow-motion)
Control bar
Format Icon Operation
DVD-VIDEODVD-VIDEO Switches the Chapter time (“TIME”), remaining
chapter (“REM”),Title time (“TOTAL”), and
remaining title (“T.REM”).
Refer to <Time search> (page 18).
Direct Title Search.
Direct Chapter Search.
Switches the Chapter repeat (“CHAPTER”),Title
repeat (“TITLE”), and repeat off (“OFF”).
Changes the audio stream.
Changes the subtitle language.
Changes the camera angle.
DVD-VRDVD-VR Switches the Program/ Play list time (“TOTAL”),
remaining program/ play list (“T.REM”).
Refer to <Time search> (page 18).
Direct Chapter Search.
Switches the Chapter repeat (“CHAPTER”),
Program repeat (“PROGRAM”), and repeat off
(“OFF”).
Changes the audio stream.
Changes the subtitle language.
Video CDVideo CD Switches theTrack time (“TIME”), remaining
track (“REM”), Disc time (“TOTAL”), and
remaining disc (“T.REM”).
Refer to <Time search> (page 18).*1
Direct Track Search.*1
Switches theTrack repeat (“TRACK”), and repeat
off (“OFF”).*1
Switches the Disc random (“ALL”), and random
off (“OFF”).*1
Changes the audio channel.
MPEG/DivX®MPEG/DivX®
Switches the File repeat (“TRACK”), Folder
repeat (“FOLDER”), and repeat off (“OFF”).
Switches the Folder random (“FOLDER”), All
random (“ALL”), and random off (“OFF”).
Changes the audio language.
Changes the subtitle language.
JPEGJPEG Switches the Folder repeat (“FOLDER”), and
repeat off (“OFF”).
*1While PBC is not in use.
1Press the [OSD] button during playback.
Pressing the button repeatedly selects Status bar,
Status & Control bar, and Status bar off sequentially.
2Press the [2] or [3] button during control bar
on-screen to select an item. Press the [ENTER]
button.
To cancel pop-up menu, press the [RETURN]✍
button.
3Press the [5] or [∞] button to change or select
the setting. Press the [ENTER] button.
⁄
• If any button is not pressed for a few seconds, the
on-screen display disappears.
B64-4433-0000EEnglish.indd17B64-4433-0000EEnglish.indd17 09.2.1010:08:30AM09.2.1010:08:30AM

18 |KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544
Time Search DVD-VIDEODVD-VIDEO DVD-VRDVD-VR Video CDVideo CD
The Time Search function allows you to start playing
at any chosen time on the disc.
1Press the [OSD] button twice briefly during
playback
2Press the [2] or [3] button to select the Time
Search icon in the on-screen display. Press the
[ENTER] button.
The “_: _ _: _ _” appears in the Time Search box.
3Press the [5] or [∞] button to change the
number, then press the [2] or [3] button to
move to the next entry
4Press the [ENTER] button to confirm the start
time
Playback starts from the selected time on the disc.
If you enter an invalid time, playback will✍
continue from the current point.
DVD-VIDEO Disc Menu
DVDs may offer menus that allow you to access
special features.
1Press the [MENU] button
The disc menu is displayed.
2Use the [5]/[∞]/[2]/[3] button to highlight
your selection, then press the [ENTER] button.
3To return to the first menu feature, press the
[TOP MENU] button again.
4To remove the disc menu, press the [MENU]
button again.
Video CD PBC Menu
Press [RETURN] to return to the menu screen.
Menu settings and operating procedures may
differ. Follow the instructions on the each menu
screen.
Canceling the PBC playback
1Press the [7] button to stop
2Press the [DIRECT] button
3Press the number buttons
4Press the [ENTER] button
To resume PBC, press [TOP MENU] or [MENU].✍
Zoom
The zoom function allows you to enlarge the video
image.
DVD-VIDEODVD-VIDEO DVD-VRDVD-VR Video CDVideo CD MPEGMPEG
Press the [ZOOM] button repeatedly during
playback or in the pause mode to enlarge the
image.
OFF, 1 – 6
You can move through the zoomed picture✍
using [5]/[∞]/[2]/[3].
JPEGJPEG
1Press the [38] button to pause
2Press the [ZOOM] button repeatedly to
enlarge the image
OFF, 1, 2
You can move through the zoomed picture✍
using [5]/[∞]/[2]/[3].
DVD-VR Menu
Selects an option from the DVD-VR Disc menu.
1Press the necessary operation button
In case of Program list : [TOP MENU]
In case of Play list : [MENU]
2Use the [5] or [∞] button to highlight your
selection, then press the [ENTER] button
To remove the disc menu, press the [MENU]✍
button or the [TOP MENU] button again
Disc/ USB Operations of Remote Control
Direct Search
Searching the chapter by entering the number.
1Select the search mode
Press the [DIRECT] button.
Each time you press the button, the search mode
alternates between the modes.
B64-4433-0000EEnglish.indd18B64-4433-0000EEnglish.indd18 09.2.1010:08:32AM09.2.1010:08:32AM

English |19
DVD-VIDEODVD-VIDEO Chapter search (“CHAP”), Title search
(“TITL”), and Search mode off.
DVD-VRDVD-VR Chapter search (“CHAP”), Program/Play
list search (“PRGM”/ ”PLST”), and Search
mode off.
Video CDVideo CD
CDCD
Track search (“TRAC”/“NMBR”) and Search
mode off.
MPEG/DivX®MPEG/DivX®
Audio FileAudio File
Track search (“TRAC” or “Track Search”),
Folder search (“FOLD” or “Folder Search”),
and Search mode off.
JPEGJPEG File search (“FILE”, “TRAC” or “Track Search”),
Folder search (“FOLD” or “Folder Search”),
and Search mode off when pressed while
playing a JPEG.
2Press the number buttons
3Press the [ENTER] button
⁄
• Direct Search cannot be performed during Random play.
• The Search mode is cleared automatically after
approximately 5 seconds.
• “0” is not displayed in the first digit by pressing the [0]
button.
Example: “- -” =Press [0], [2] =“- 2”.
⁄
• An image is displayed at the folder list position when an
album art is attached to the tag of a playing audio file.
To select a playback mode
1Show the Playback mode selection screen
Press the [OSD] button.
2Press the [2] or [3] button to select a
playback mode
MPEG/DivX®MPEG/DivX®
Audio FileAudio File CDCD
“REPEAT”/ “RANDOM”
3Press the [5] or [∞] button to select an item
“REPEAT”: Track/File repeat*1(“TRACK”), Folder
repeat*2(“FOLDER”), and repeat off
(“OFF”).
“RANDOM”*1: Folder random (“FOLDER”), All
random (“ALL”), and random off
(“OFF”).
*1Not selectable for JPEG
*2Not selectable for CD
4Press the [ENTER] button
List screen
1Press the [7] button to stop
2Show the list screen
Press the [MENU] or [TOP MENU] button.
3Select an item from the folder list
Use [5]/[∞]/[2]/[3] to highlight your selection,
and then press the [ENTER] button.
4Select a track to start playing
Use [5]/[∞]/[2]/[3] to highlight your selection,
and then press the [ENTER] or [3] button.
To go back to the folder list, press the [RETURN]✍
button.
5To remove the List screen, press the [MENU]
button again.
File Select
MPEG/DivX®MPEG/DivX® JPEGJPEG Audio FileAudio File CDCD
You can select a file from the list display.
1Folder list
2Track information
3Track list
1Show the control screen
MPEG/DivX®MPEG/DivX® JPEGJPEG Press the [7] button to stop.
Audio FileAudio File CDCD Automatically appear during
play.
2Press [2] or [3] to select “Folder” column or
“Track” column
MPEG/DivX®MPEG/DivX® JPEGJPEG Audio FileAudio File
3Press the [5] or [∞] button to select a folder or
track
4Start playback
MPEG/DivX®MPEG/DivX® JPEGJPEG Press the [ENTER] button.
Audio FileAudio File CDCD Playback starts automatically.
B64-4433-0000EEnglish.indd19B64-4433-0000EEnglish.indd19 09.2.1010:08:32AM09.2.1010:08:32AM

20 |KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544
iPod Operations of Remote Control
3Search for music/video
Operation type Operation
Movement between items Press the [
5 ] or [ ∞ ] button.
Selection of item Press the [ENTER] or [
3 ] button.
Return to previous item Press the [
2 ] or [MENU] button.
Return toTop menu Press the [TOP MENU] button.
Cancelling the Search mode Press the [RETURN] button.
⁄
• An image is displayed in the category list when a playing
song has artwork with “MENU”> “iART” (page 11) of the
<Function Control> set to ON.
• It takes some seconds to read artwork. You cannot
operate during the read operation.
To select a playback mode
1Show the Playback mode selection screen
Press the [OSD] button.
2Select a playback mode
Press the [2] or [3] button.
“REPEAT”/ “RANDOM”/ “AUDIO BOOK”
3Select an item
Press the [5] or [∞] button.
“REPEAT”: File repeat (“ONE”), All repeat (“ALL”), and
repeat off (“OFF”).
“RANDOM”: Song random (“SONGS”), Album
random* (“ALBUMS”), and random off
(“OFF”).
“AUDIO BOOK”: Normal speed (“NORMAL”), Faster
speed (“FASTER”), and Slower speed
(“SLOWER”).
4Press the [ENTER] button
⁄
• * Functions only if you select “All Albums” or “All” in
“Albums” of the main “MENU”.
Before Use
• Video output setting of iPod needs to be set on
your iPod.
• Turn on the monitor to watch the playback picture.
If you turn on the monitor, you can also control
playback of other discs by referring to the monitor
screen.
• Set the remote controller mode switch to “DVD”
mode before starting operation, refer to <Remote
Controller mode switch> (page 32).
Playing the iPod
Connecting the iPod
“READING” appears in the display, and playback
starts automatically.
Playing or pausing
Press the [38] button.
Stopping the play
Press the [7] button.
Searching for a chapter/ scene/ track/ file
Press the [4] or [¢] button.
Fast Forwarding or Fast Backwarding
Press the [1] or [¡] button.
Function of KDV-5244U/ KDV-5544U
Search Mode
You can select a file from the list display.
1Category list
2Track information
3Track list
1Enter Search mode
Press the [TOP MENU] or [MENU] button.
2Select an menu item
Press the [5] or [∞] button to select an menu
Music/ Videos/ Shuffle Songs
B64-4433-0000EEnglish.indd20B64-4433-0000EEnglish.indd20 09.2.1010:08:34AM09.2.1010:08:34AM