Ketko Capri Flostatic User manual

Electric Online Water Heater
C-RF - 3.0 / 4.5 / 5.5 / 6.7 / 8.0
Flostatic

- 1 -

- 2 -
15. Do not use 3 Pin Plug Socket connection.

- 3 -
2. Flosensor Technology : A unique flosensor activates the heater, moment
water starts flowing from the tap, thus completely eliminating need to
use ON/OFF switch.
3. Extreme overheating thermal cut-off. When the heating temperature is
over 90 C, the power will be cut-off.
4.
CUT-OUT HEATER

- 4 -
3.0kW 4.5kW 5.5kW 6.7kW 8.0kW
25 Amp 32 Amp 32 Amp 32 Amp 40 Amp
1.5 sq mm 2.5 sq mm 4 sq mm 4 sq mm 6 sq mm
Flostatic
325*170*170*mm
Flostatic - 3.0 / 4.5 / 5.5 / 6.7 / 8.0
L
N
E
Thermal Cut Out 90 C Heating Element
Floswitch
Flostatic
Circuitry
MCB Current Rating
Overheat protection 65 C

- 5 -
Fig 1 Front and Side
CUT-OUT HEATER

Fig 3
- 6 -
Correct Method
of Wire Connection
Water Heater wires should be directly connected to the Switch Terminals
AC Plug Socket
Distribution
x
Three Pin Plug Socket
Three Pin Top
x
CORRECT METHOD OF WIRE CONNECTION
Please Use
2Pole MCB
3.0kW MCB 25 Amp.
4.5kW MCB 32 Amp.
5.5kW MCB 32 Amp.
6.7kW MCB 32 Amp.
8.0kW MCB 40 Amp.
x
USE THE DRILL TEMPLATE PROVIDED TO MARK AND
DRILL HOLES ON THE WALL AND FIX SCREWS

- 7 -
Fig 4
plumbing must be completed before proceeding with electrical hook-up.
The unit
The unit
CUT-OUT HEATER

- 8 -
4,
3. Turn on water supply, then adjust the outlet temperature by controlling the flow
of water. Orange lamp indicates heating ON, when water tap is turned off the
orange lamp goes OFF and heating stops.
Only 3kW Model
3kW model shall have a
water head of minimum
4 feet above the water heater
All Models
All other models shall have
a water head of minimum
10 feet above the water heater

- 9 -
A. Open valve bigger.
1. Inlet and outlet
fittings leaking
6. Outlet gives
less water flow
8. Red lamp On A. Temperature Over Heated
3.
C
D
E
C
D
E
4.
5.
7.
2. Safety valve leaking A. Water Pressure too high A. Install pressure reducing valve
desired temperature
A. Inlet filter net is blocked
A . Inlet strainer or shower clogged.
A. Contact local service
A. Clean the filter
A. Clean strainer and shower.

- 10 -
CUSTOMER COPY
Please inform the company after installation
before use to verify correct installation and demo.
Warranty void if this is not done and company is not
responsible for any consequential loss or damage.
Dealer
2 Years
Note: This warranty is on spare parts and labour charges
only and does not cover transportation expenses.
WARRANTY CERTIFICATE
Please do not use CPVC pipes for internal and external
connection at both the Hot and Cold water lines
and the company is not responsible for pipes, tiles and
any other damage connected to this unit.
1) Installation must be appropriate as mentioned in the Instruction Manual and Warranty
Card and by an Authorized Person Only after taking into consideration the site conditions.
2) Within the 2 Year warranty period, if the product malfunctions or stops working due to
above point no:1 not being implemented then the spare parts as well as labour charges
are applicable at actuals and will not be covered under warranty.
Terms and Conditions :
Technical Details : 8291444974 E-mail : [email protected]
For Status of Service Call : 022 4344 7455\66
After Sales Service : WhatsApp : [phone]. (Do not Call)

- 11 -
CUSTOMER COPY
WARRANTY CERTIFICATE
This is not valid without dealer stamp and invoice copy
Invoice Date:Invoice No:

- 12 -
COMPANY COPY
Please inform the company after installation
before use to verify correct installation and demo.
Warranty void if this is not done and company is not
responsible for any consequential loss or damage.
Dealer
2 Years
Note: This warranty is on spare parts and labour charges
only and does not cover transportation expenses.
WARRANTY CERTIFICATE
Please do not use CPVC pipes for internal and external
connection at both the Hot and Cold water lines
and the company is not responsible for pipes, tiles and
any other damage connected to this unit.
1) Installation must be appropriate as mentioned in the Instruction Manual and Warranty
Card and by an Authorized Person Only after taking into consideration the site conditions.
2) Within the 2 Year warranty period, if the product malfunctions or stops working due to
above point no:1 not being implemented then the spare parts as well as labour charges
are applicable at actuals and will not be covered under warranty.
Terms and Conditions :

- 13 -
COMPANY COPY
WARRANTY CERTIFICATE
This is not valid without dealer stamp and invoice copy
Invoice Date:Invoice No:

- 14 -
To ensure consistent water flow, it is recommended following
maintenance.
Drill template for holes Copy