Keyscaper Desktop Picture Frame with Clock User manual

keyscaper®
fan gear
Desktop Picture Frame with Clock
Product Manual
Version 1.0

THANK YOU!
Thanks for choosing Keyscaper!
Please read the following manual carefully to ensure you get the most out of your
Desktop Picture Frame with Clock.
Product Guide:
5”x 3.5” Photo Holder
Alarm Indicator
Time
Temperature
Day of the Week
Date
2
3
4
5
4
6
6&
5
7
7
Index: Page
Putting in the Batteries 3
Inserting a Photo 4
Setting the Alarm 5
Setting the Time 6
Choosing OF or OC 7
Setting the Date/Day 7
1
2
3

Putting in the Batteries
1
The battery pannel is located behind
the arm of the frame. the arm can be
gently pushed into a locked position.
On the battery door, push the plastic tab
towards the top of the frame. This piece is
usually fairly stiff because it is new. This will
release the door.
This frame uses two AAA batteries. Insert the positive and negative
ends of the batteries as they are shown inside the battery compartment.
The frame should play a short tune and display a default time when the
batteries are inserted correctly.
Next align the plastic ngers of the door with the holes at the top of the
compartment. Snap the door into place to secure the batteries.

Inserting a Photo
2
Push the plastic tab towards the bottom of the frame. This piece is usually fairly
stiff because it is new. This will release the door. The door is on a hinge and will
not come off all the way.
Inside the door is a piece of glass and a piece of thin
cardboard. You can use the cardboard as a template to
trim a copy of your favorite photo down to the 5”x 3.5”
size. Once you have trimmed your photo simply place it
it inside the window, with or without the cardboard.

Setting the Alarm
3
To set the alarm, push the alarm button.
Now push the set button.
Once you have selected your notiction tune/beep, push the
set button one last time. Your alarm is now set.
Now push the set button again. The minutes should now
be ashing. Use the up and down to adjust the
time to the correct minute(s).
Finally push the set button again. A smaller number in the
lower left corner of the display should be ashing. Use the
up and down to change the notication tune/beep.
The hour should now be ashing on the display.
Use the up and down to adjust the time to
the correct hour.

Setting the Time
4
To set the time push the mode button.
Now use the and down to choose between
Standard (12hr) and Military (24hr) time. Hit the set button
once you have the correct one selected
Continue to next page to set the correct date...
Now push the set button again. The minutes should now
be ashing. Use the up and down to adjust the
time to the correct minute(s).
Finally push the set button again. Now the year will be
ashing in place of the time. Use the up and down
to change the year. Hit set once the year is correct.
The hour should now be ashing on the display.
Use the up and down to adjust the time to
the correct hour.

Setting the Date
6
5
& 7
Once the year has been corrected and you hit the set button
the small number in the lower left corner indicates the
month. This month be ashing. Use the up and down
to make the month correct. Hit the set button once it is
correct and this will cause the day to ash.
Use the up and down to make the day correct. Hit
the set button once it is correct and this will cause the unit
of time to ash again. After about a minute the unit will stop
ashing and you time and date will be completely set.
Temperature
When nothing is ashing you can use the set button toggle
between OF or OC.