Keysight Technologies 11590B Service manual

The test & measurement
equipment you need at
the price you want.
Alltest carries the world’s largest selection of
used/refurbished benchtop test & measurement
equipment at 50% the price of new.
O
Our equipment is guaranteed working, warrantied, and
available with certified calibration from our in-house staff
of technicians and engineers.
• 10+ full time technicians with over 150 years of
specialization
• 90 day warranty & 5 day right of return on all
equipment
•
• 1-3 year warranties for new and
premium-refurbished equipment
• Every unit tested to OEM specifications
• Satisfaction guaranteed
You have plans, we will help you achieve them.
Any project. Any budget.
Get a quote today!
CCall [phone] or email [e-mail].
t
Alltest Instruments, Inc.
500 Central Ave.
Farmingdale, NJ 07727
P: [phone]
F: [phone]
alltest.net
s
[e-mail]

Keysight
11590B
Bias Network
Operating and
Service Manual

Notices
©Keysight Technologies 1995 - 2015
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into a foreign language) without prior
agreement and written consent from Key-
sight Technologies as governed by United
States and international copyright laws.
Manual Part Number
11590-90020
Edition
January 2015
Supersedes: January 1995, April 2014
Keysight Technologies
1400 Fountaingrove Parkway
Santa Rosa, CA 95403
Warranty
The material contained in this docu-
ment is provided “as is,” and is sub-
ject to being changed, without notice,
in future editions. Further, to the max-
imum extent permitted by applicable
law, Keysight disclaims all warran-
ties, either express or implied, with
regard to this manual and any infor-
mation contained herein, including but
not limited to the implied warran-ties
of merchantability and fitness for a
particular purpose. Keysight shall not
be liable for errors or for inciden-tal or
consequential damages in con-
nection with the furnishing, use, or
performance of this document or of
any information contained herein.
Should Keysight and the user have a
separate written agreement with
warranty terms covering the material
in this document that conflict with
these terms, the warranty terms in the
separate agreement shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of
a U.S. Government prime contract or sub-
contract, Software is delivered and
licensed as “Commercial computer soft-
ware” as defined in DFAR 252.227-7014
(June 1995), or as a “commercial item” as
defined in FAR 2.101(a) or as “Restricted
computer software” as defined in FAR
52.227-19 (June 1987) or any equivalent
agency regulation or contract clause. Use,
duplication or disclosure of Software is
subject to Keysight Technologies’ standard
commercial license terms, and non-DOD
Departments and Agencies of the U.S. Gov-
ernment will receive no greater than
Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S. Govern-
ment users will receive no greater than
Limited Rights as defined in FAR 52.227-14
(June 1987) or DFAR 252.227-7015 (b)(2)
(November 1995), as applicable in any
technical data.
Safety Notices
CAUTION
A CAUTION notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like
that, if not correctly performed or
adhered to, could result in damage
to the product or loss of important
data. Do not proceed beyond a
CAUTION notice until the indicated
conditions are fully understood and
met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could result
in personal injury or death. Do not
proceed beyond a WARNING
notice until the indicated condi-
tions are fully understood and met.

11590B Operating and Service Manual 1
11590B Bias Network
General Information
This Operating and Service Manual contains information required to install, operate and test the 11590B and
11590B Option 001 bias networks. The 11590B is equipped with Type-N female connectors and operates to
12.4 GHz. The 11590B Option 001 is equipped with precision 7 mm connectors and operates to 18.0 GHz.
Specifications
Instrument specifications are listed in Ta b l e 1 . These specifications are the performance standards or limits
against which the instrument is tested.
Table 1 Specifications
Electrical
Frequency Range
Standard 0.1 to 12.4 GHz
Option 001 0.1 to 18.0 GHz
Impedance 50 ohms nominal
Port Match (both ports); Minimum Return Loss
Standard
0.1 to 1.0 GHz 16 dB
1.0 to 12.4 GHz 19 dB
Option 001
0.1 to 1.0 GHz 16 dB
1.0 to 12.4 GHz 19 dB
12.4 to 18.0 GHz 14 dB
Insertion Loss; Maximum
Standard
0.1 to 1.0 GHz 1.0 dB
1.0 to 12.4 GHz 0.8 dB
Option 001
0.1 to 1.0 GHz 1.0 dB
1.0 to 12.4 GHz 0.8 dB
12.4 to 18.0 GHz 1.2 dB

2 11590B Operating and Service Manual
Description
The 11590B bias network provides a means of supplying dc bias to the center conductor of a coaxial line and
thus to a biasable component or device (such as a transistor), while blocking the dc bias from the input RF
circuit.
A schematic diagram of the 11590B is shown is Figure 1. The capacitor in the RF input arm acts as a dc
block/high pass filter. The vertical arms are identical and act as bias/bias sense arms. Because the
BIAS/BIAS SENSING port draws no current (it is connected to a high impedance voltmeter), the voltage
measured is identical to the voltage at the RF and Bias Output. To double the maximum current handling
capability, both BIAS/BIAS SENSING ports may be used for bias input.
A vertical arm is comprised of a series inductance and shunt capacitance which act together as a low pass
filter. The ferrite beads and R-C filter decouple the power supply from the RF section and help to reduce the
possibility of inductance related oscillation.
Maximum Bias Voltage 100 Vdc
Maximum Bias Current
(each bias port)
500 mA
DC Resistance from Bias
Port to Output Port at 23 °C
(typical)
3.0 ohms
General
Operating Temperature 0 to 55°C
RF Connectors (non-hermetic)
Standard Type-N female
Option 001 Precision 7 mm
Bias Connector
(non-hermetic)
BNC female
Net Weight 0.30 kg (0.7 lbs)
Dimensions
In millimeters 54 x 51 x 28
In inches 2.2 x 2 x 2.1
Table 1 Specifications

11590B Operating and Service Manual 3
Figure 1 Schematic Diagram
Installation
Initial Inspection
Inspect the shipping container for damage. If the shipping container or cushioning material is damaged, it
should be kept until the contents of the shipment have been checked for completeness and the instrument
has been checked mechanically and electrically. Procedures for checking electrical performance are given
under “PERFORMANCE TESTS”. If the contents are incomplete, if there is mechanical damage or defect, or
if the 11509B bias network does not pass the Performance Tests, notify Keysight Technologies –
see“Contacting Keysight” on page 8. If the shipping container is damaged, or the cushioning material shows
signs of stress, notify the carrier as well as Keysight. Keep the shipping materials for the carrier’s inspection.
The Keysight office will arrange for repair or replacement at Keysight’s option without waiting for claim
settlement.
Preparation For Use
Interconnections The 11590B bias network is connected in line with the device to be biased. The bias is
applied through either BIAS/BIAS SENSING port, and is sensed through the other BIAS/BIAS SENSING
port.
Mating Connectors The mating connectors for Type-N connectors are the opposite gender Type-N
connectors. Precision 7 mm connectors (Option 001) are genderless.

4 11590B Operating and Service Manual
Operating Environment
The instrument may be operated in environments within the following limits:
The instrument should be protected from temperature and humidity conditions which cause condensation
within the instrument.
Storage and Shipment
The instrument may be stored in environments within the following limits:
The instrument should be protected from temperature and humidity conditions which cause condensation
within the instrument.
Packaging
Tagging for Service If the instrument is being returned to Keysight for service, attach a tag indicating the
type of service required, return address, and model number. See“Contacting Keysight” on page 8.
Original Packaging Containers and materials identical to those used in factory packaging are available
through Keysight offices. Mark the container FRAGILE to ensure careful handling.
Other Packaging The following general instructions should be used for re-packing with commercially
available materials:
1. Wrap the instrument in heavy paper or plastic (If shipping to a Keysight office or service center, attach a
tag as explained previously).
2. Use a strong shipping container.
3. Use a thick layer of shock absorbing material 70 to 100 mm (3 to 4 inches) thick around all sides of the
instrument to provide firm cushioning and prevent movement inside the container.
4. Seal the shipping container securely.
5. Mark the shipping container FRAGILE to ensure careful handling.
6. In any correspondence, refer to the instrument by model number and full serial number.
Temperature 0° to +55°C
Humidity Up to 95%
Altitude Up to 7625 meters
(25,000 feet)
Temperature –40°C to +75°C
Humidity Up to 95%
Altitude Up to 7625 meters
(25,000 feet)

11590B Operating and Service Manual 5
Operation
Operating Instructions
Figure 2 shows the Keysight 11590B bias network connected in a typical measurement setup. Many other
applications are possible but not shown because the general method of setup and operation is the same.
The 11590B contains an in-line filter which will help prevent inductance related oscillations. However, to
eliminate the possibility of oscillation with bipolar transistors, it is recommended that the 11635A bias
decoupling network be used with the 11590B.
Figure 2 Typical Measurement Setup
Performance Tests
The procedures in this section tests the electrical performance of the 11590B using the specifications of
Ta b l e 1 as performance standards.
Test Record
Results of the performance tests may be tabulated on the Test Record at the end of the procedures.
Performance may be verified using either a vector or scalar network analyzer setup. Errors due to directivity,
source match, and return loss of the “opposite port” termination (and detector match in a scalar system) will
add uncertainties to your measurement. The most accurate method uses an error corrected instrument.
However, a scalar system will give acceptable results depending on the quality of the components.
The following general instructions apply to both vector and scalar network analyzers.
Return Loss Of Input and Output Ports (Port Match)
1. Connect the equipment for a standard reflection measurement.
2. Calibrate the system with the appropriate standards.
3. Connect the appropriate instrument port of the 11590B to the test port. Terminate the opposite port of
the 11590B with a 50 ohm load.

6 11590B Operating and Service Manual
NOTE The Return Loss of the load should be at least 20 dB better than the desired measurement
value.
4. Measure the port match. The specifications are as follows:
Insertion Loss
1. Connect the equipment for a standard insertion loss measurement.
2. Calibrate the system with a through line.
3. Replace the through line with the 11590B.
4. Measure the insertion loss. The specifications are as follows:
Adjustments
There are no mechanical or electrical adjustments on the 11590B bias network.
Port Match (both ports) – Minimum Return Loss
Standard
0.1 to 1.0 GHz 16 dB
1.0 to 12.4 GHz 19 dB
Option 001
0.1 to 1.0 GHz 16 dB
1.0 to 12.4 GHz 19 dB
12.4 to 18.0 GHz 14 dB
Insertion Loss – Maximum
Standard
0.1 to 1.0 GHz 1.0 dB
1.0 to 12.4 GHz 0.8 dB
Option 001
0.1 to 1.0 GHz 1.0 dB
1.0 to 12.4 GHz 0.8 dB
12.4 to 18.0 GHz 1.2 dB

11590B Operating and Service Manual 7
Replacement Parts
Inner Conductor Contact; Option 001
The center conductor collet (Figure 3) in the precision 7 mm connector, Keysight part number 1250-0907,
may be replaced using a special extractor tool, Keysight part number 5060-0370. Examine the collet with a
magnifying glass to determine if it is damaged. The collet must be free of burrs and the prongs must be
equally spaced. If the collet needs to be replaced, perform the following procedure:
1. Place the instrument so that the connector faces down.
2. Tap the connector lightly on the outside ring and the center conductor collet should protrude slightly.
3. Compress the handle of the collet extractor tool, causing the jaws to expand, and insert the tool into the
precision 7 mm connector.
4. Release the compression on the extractor tool, allowing the jaws of the tool to close on the center
conductor collet. Pull the tool straight out from the connector without twisting. The collet will come out
of the connector with the tool. Do not reuse the extracted collet.
5. To install a new center conductor collet, push the collet into the center conductor until it snaps into
place. No special tool is required for this operation.
Figure 3 Precision 7 mm Connector
Service
There are no serviceable parts in the 11590B bias network.

8 11590B Operating and Service Manual
Tes t Recor d
Contacting Keysight
Assistance with test and measurement needs and information on finding a local Keysight office are
available on the Web at:
www.keysight.com/find/assist
NOTE In any correspondence or telephone conversation, refer to the Keysight product by its model
number and full serial number. With this information, the Keysight representative can
determine whether your product is still within its warranty period.
Specifications Tested Step Test Cond. (GHz) Limit (dB) Result (dB)
Port Match (Return Loss)
Standard 39
0.1 to 1.0 ≥16
1.0 to 12.4 ≥19
Option 001 39
0.1 to 1.0 ≥16
1.0 to 12.4 ≥19
12.4 to 18.0 ≥14
Insertion Loss
Standard 40
0.1 to 1.0 ≤1.0
1.0 to 12.4 ≤0.8
Option 001 40
0.1 to 1.0 ≤1.0
1.0 to 12.4 ≤0.8
12.4 to 18.0 ≤1.2

This information is subject to change without notice.
©Keysight Technologies 1995 - 2015
January 2015
*11590-90020*
11590-90020
www.keysight.com