Keysight Technologies EPM-P Series Operating instructions

Keysight EPM-P Series
Power Meters
Programming
Guide

2 Keysight EPM-P Series Programming Guide
Notices
Copyright Notice
© Keysight Technologies 2000 - 2019
No part of this manual may be
reproduced in any form or by any
means (including electronic storage
and retrieval or translation into a
foreign language) without prior
agreement and written consent from
Keysight Technologies as governed by
United States and international
copyright laws.
Manual Part Number
E4416-90029
Edition
Edition 6, September 4, 2019
Printed in:
Printed in Malaysia
Published by:
Keysight Technologies
Bayan Lepas Free Industrial Zone,
11900 Penang, Malaysia
Technology Licenses
The hardware and/or software
described in this document are
furnished under a license and may be
used or copied only in accordance with
the terms of such license.
Declaration of Conformity
Declarations of Conformity for this
product and for other Keysight
products may be downloaded from the
Web. Go to http://www.keysight.com/
go/conformity. You can then search by
product number to find the latest
Declaration of Conformity.
U.S. Government Rights
The Software is “commercial computer
software,” as defined by Federal
Acquisition Regulation (“FAR”) 2.101.
Pursuant to FAR 12.212 and 27.405-3
and Department of Defense FAR
Supplement (“DFARS”) 227.7202, the
U.S. government acquires commercial
computer software under the same
terms by which the software is
customarily provided to the public.
Accordingly, Keysight provides the
Software to U.S. government
customers under its standard
commercial license, which is embodied
in its End User License Agreement
(EULA), a copy of which can be found
at http://www.keysight.com/find/
sweula. The license set forth in the
EULA represents the exclusive authority
by which the U.S. government may use,
modify, distribute, or disclose the
Software. The EULA and the license set
forth therein, does not require or
permit, among other things, that
Keysight: (1) Furnish technical
information related to commercial
computer software or commercial
computer software documentation that
is not customarily provided to the
public; or (2) Relinquish to, or
otherwise provide, the government
rights in excess of these rights
customarily provided to the public to
use, modify, reproduce, release,
perform, display, or disclose
commercial computer software or
commercial computer software
documentation. No additional
government requirements beyond
those set forth in the EULA shall apply,
except to the extent that those terms,
rights, or licenses are explicitly required
from all providers of commercial
computer software pursuant to the FAR
and the DFARS and are set forth
specifically in writing elsewhere in the
EULA. Keysight shall be under no
obligation to update, revise or
otherwise modify the Software. With
respect to any technical data as
defined by FAR 2.101, pursuant to FAR
12.211 and 27.404.2 and DFARS
227.7102, the U.S. government
acquires no greater than Limited Rights
as defined in FAR 27.401 or DFAR
227.7103-5 (c), as applicable in any
technical data.
Warranty
THE MATERIAL CONTAINED IN THIS
DOCUMENT IS PROVIDED “AS IS,” AND
IS SUBJECT TO BEING CHANGED,
WITHOUT NOTICE, IN FUTURE
EDITIONS. FURTHER, TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE
LAW, KEYSIGHT DISCLAIMS ALL
WARRANTIES, EITHER EXPRESS OR
IMPLIED, WITH REGARD TO THIS
MANUAL AND ANY INFORMATION
CONTAINED HEREIN, INCLUDING BUT
NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE. KEYSIGHT SHALL NOT BE
LIABLE FOR ERRORS OR FOR
INCIDENTAL OR CONSEQUENTIAL
DAMAGES IN CONNECTION WITH THE
FURNISHING, USE, OR PERFORMANCE
OF THIS DOCUMENT OR OF ANY
INFORMATION CONTAINED HEREIN.
SHOULD KEYSIGHT AND THE USER
HAVE A SEPARATE WRITTEN
AGREEMENT WITH WARRANTY TERMS
COVERING THE MATERIAL IN THIS
DOCUMENT THAT CONFLICT WITH
THESE TERMS, THE WARRANTY TERMS
IN THE SEPARATE AGREEMENT SHALL
CONTROL.
Safety Information
CAUTION
A CAUTION notice denotes a hazard. It
calls attention to an operating
procedure, practice, or the like that, if
not correctly performed or adhered to,
could result in damage to the product
or loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are fully
understood and met.
WARNING
A WARNING notice denotes a hazard. It
calls attention to an operating
procedure, practice, or the like that, if
not correctly performed or adhered to,
could result in personal injury or death.
Do not proceed beyond a WARNING
notice until the indicated conditions are
fully understood and met.

Keysight EPM-P Series Programming Guide 3
Personal Safety Information
WARNING
This is a Safety Class I product (provided with a protective earthing ground
incorporated in the power cord). The mains plug shall only be inserted in a
socket outlet provided with a protective earth contact. Any interruption of
the protective conductor, inside or outside the instrument, is likely to make
the instrument dangerous. Intentional interruption is prohibited.
If this instrument is not used as specified, the protection provided by the
equipment could be impaired. This instrument must be used in a normal
condition (in which all means of protection are intact) only.
No operator serviceable parts inside. Refer servicing to qualified personnel.
To prevent electrical shock, do not remove covers.
For continued protection against fire hazard, replace the line fuse(s) only
with fuses of the same type and rating (for example, normal blow, time delay,
etc.). The use of other fuses or material is prohibited.

4 Keysight EPM-P Series Programming Guide
General Safety Considerations
User environment
The product is suitable for indoor use only.
WARNING
Before this instrument is switched on, make sure it has been properly
grounded through the protective conductor of the ac power cable to a
socket outlet provided with protective earth contact.
Any interruption of the protective (grounding) conductor, inside or outside
the instrument, or disconnection of the protective earth terminal can result
in personal injury.
CAUTION
Any adjustments or service procedures that require operation of the
instrument with protective covers removed should be performed only by
trained service personnel.

Keysight EPM-P Series Programming Guide 5
Waste Electrical and Electronic Equipment (WEEE) Directive
2002/96/EC
This instrument complies with the WEEE Directive (2002/96/EC) marking
requirement. This affixed product label indicates that you must not discard this
electrical or electronic product in domestic household waste.
Product category
With reference to the equipment types in the WEEE directive Annex 1, this
instrument is classified as a “Monitoring and Control Instrument” product.
The affixed product label is as shown below.
Do not dispose in domestic household waste.
To return this unwanted instrument, contact your nearest Keysight Service Center,
or visit http://about.keysight.com/en/companyinfo/environment/takeback.shtml
for more information.
Sales and Technical Support
To contact Keysight for sales and technical support, refer to the support links on
the following Keysight websites:
–www.keysight.com/find/powersensors
(product-specific information and support, software and documentation
updates)
–www.keysight.com/find/assist
(worldwide contact information for repair and service)

6 Keysight EPM-P Series Programming Guide
Related Publications
The EPM-P Series Power Meters User’s Guide is available on the CD-ROM and in
the following languages:
– English Language User’s Guide - Standard
– German Language User’s Guide - Option ABD
– Spanish Language User’s Guide - Option ABE
– French Language User’s Guide - Option ABF
– Italian Language User’s Guide - Option ABZ
– Japanese Language User’s Guide - Option ABJ
Useful information on SCPI (Standard Commands for Programmable Instruments)
can be found in:
–ABeginner’s Guide to SCPI, which is available by ordering Keysight Part
Number 5010-7166.
– The SCPI reference manuals which are available from:
SCPI Consortium,
8380 Hercules Drive, Suite P3,
La Mesa, CA 91942, USA.
Telephone: [phone]
Fax: [phone]

Keysight EPM-P Series Programming Guide 7
Table of Contents
Personal Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
General Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
User environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Waste Electrical and Electronic Equipment (WEEE) Directive
2002/96/EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Product category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Sales and Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
1PowerMeterRemote Operation
Configuring the Remote Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Interface election . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
GPIB address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
RS232/RS422 configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Zeroing and Calibrating the Power Meter . . . . . . . . . . . . . . . . . . . . . . .28
Zeroing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Setting the reference calibration factor . . . . . . . . . . . . . . . . . . . . . .30
Making Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Using MEASure? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using the CONFigure command . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Using the lower level commands . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Making Measurements on Wireless Communication Standards . . . . . .47
Measuring GSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Measuring EDGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Measuring NADC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Measuring iDEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Measuring bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Measuring cdmaOne . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Measuring cdma2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Using Sensor Calibration Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

8 Keysight EPM-P Series Programming Guide
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Editing sensor calibration tables . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Selecting a sensor calibration table . . . . . . . . . . . . . . . . . . . . . . . . . 67
Enabling the sensor calibration table system . . . . . . . . . . . . . . . . . . 68
Making the measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Using Frequency Dependent Offset Tables . . . . . . . . . . . . . . . . . . . . . . 70
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Editing frequency dependent offset tables . . . . . . . . . . . . . . . . . . . . 72
Selecting a frequency dependent offset table . . . . . . . . . . . . . . . . . 75
Enabling a frequency dependent offset table . . . . . . . . . . . . . . . . . . 75
Making The measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Setting the Range, Resolution and Averaging . . . . . . . . . . . . . . . . . . . 78
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Averaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Setting Offsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Channel offsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Display offsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Setting Measurement Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Setting limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Checking for limit failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Measuring Pulsed Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Using duty cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Making the measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Getting the Best Speed Performance . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Measurement rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Trigger mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Output format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Command used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Fast mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Keysight EPM-P Series Programming Guide 9
How Measurements are Calculated . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Status Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
The general status register model . . . . . . . . . . . . . . . . . . . . . . . . . . .96
How to use registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Status registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Using the operation complete commands . . . . . . . . . . . . . . . . . . .113
Saving and Recalling Power Meter Configurations . . . . . . . . . . . . . . .115
How to save and recall a configuration . . . . . . . . . . . . . . . . . . . . . .115
Example program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Using Device Clear to Halt Measurements . . . . . . . . . . . . . . . . . . . . .116
An Introduction to the SCPI Language . . . . . . . . . . . . . . . . . . . . . . . .117
Syntax conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
SCPI data types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Input message terminators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Summary Of Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
MEASurement commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
CALCulate subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
CALibration subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
DISPlay subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
FORMat subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
MEMory subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
OUTPut subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
[SENSe] subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
STATus subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
SYSTem subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
TRACe subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
TRIGger subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139
UNIT subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
SERVice subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
SCPI Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
2MeasurementCommands
Measurement Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
CONFigure[1]|2|3|4? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152

10 Keysight EPM-P Series Programming Guide
CONFigure[1]|2|3|4 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
CONFigure[1]|2|3|4[:SCALar][:POWer:AC] [<expected_value>[,<resolu-
tion>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
CONFigure[1]|2|3|4[:SCALar][:POWer:AC]:RELative [<expected_val-
ue>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . 158
CONFigure[1]|2|3|4[:SCALar][:POWer:AC]:DIFFerence [<expected_val-
ue>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . 160
CONFigure[1]|2|3|4[:SCALar][:POWer:AC]:DIFFerence:RELative [<expect-
ed_value>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . 162
CONFigure[1]|2|3|4[:SCALar][:POWer:AC]:RATio [<expected_value>[,<reso-
lution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
CONFigure[1]|2|3|4[:SCALar][:POWer:AC]:RATio:RELative [<expected_val-
ue>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . 166
FETCh[1]|2|3|4 Queries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
FETCh[1]|2|3|4[:SCALar][:POWer:AC]? [<expected_value>[,<resolu-
tion>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
FETCh[1]|2|3|4[:SCALar][:POWer:AC]:RELative? [<expected_value>[,<reso-
lution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
FETCh[1]|2|3|4[:SCALar][:POWer:AC]:DIFFerence? [<expected_val-
ue>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . 173
FETCh[1]|2|3|4[:SCALar][:POWer:AC]:DIFFerence:RELative? [<expect-
ed_value>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . 175
FETCh[1]|2|3|4[:SCALar][:POWer:AC]:RATio? [<expected_value>[,<resolu-
tion>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
FETCh[1]|2|3|4[:SCALar][:POWer:AC]:RATio:RELative? [<expected_val-
ue>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . 179
READ[1]|2|3|4 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
READ[1]|2|3|4[:SCALar][:POWer:AC]? [<expected_value>[,<resolu-
tion>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
READ[1]|2|3|4[:SCALar][:POWer:AC]:RELative? [<expected_value>[,<reso-
lution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
READ[1]|2|3|4[:SCALar][:POWer:AC]:DIFFerence? [<expected_val-
ue>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . 186

Keysight EPM-P Series Programming Guide 11
READ[1]|2|3|4[:SCALar][:POWer:AC]:DIFFerence:RELative? [<expect-
ed_value>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . .188
READ[1]|2|3|4[:SCALar][:POWer:AC]:RATio? [<expected_value>[,<resolu-
tion>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190
READ[1]|2|3|4[:SCALar][:POWer:AC]:RATio:RELative? [<expected_val-
ue>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . .192
MEASure[1]|2|3|4 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
MEASure[1]|2|3|4[:SCALar][:POWer:AC]? [<expected_value>[,<resolu-
tion>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
MEASure[1]|2|3|4[:SCALar][:POWer:AC]:RELative? [<expected_val-
ue>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . .197
MEASure[1]|2|3|4[:SCALar][:POWer:AC]:DIFFerence? [<expected_val-
ue>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . .199
MEASure[1]|2|3|4[:SCALar][:POWer:AC]:DIFFerence:RELative? [<expect-
ed_value>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . .201
MEASure[1]|2|3|4[:SCALar][:POWer:AC]:RATio? [<expected_value>[,<reso-
lution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203
MEASure[1]|2|3|4[:SCALar][:POWer:AC]:RATio:RELative? [<expected_val-
ue>[,<resolution>[,<source list>]]] . . . . . . . . . . . . . . . . . . . . . . . . . .205
3 CALCulate Subsystem
CALCulate Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208
CALCulate[1]|2|3|4:FEED[1]|2 <string> . . . . . . . . . . . . . . . . . . . . . . . . .210
CALCulate[1]|2|3|4:GAIN Commands . . . . . . . . . . . . . . . . . . . . . . . . . .212
CALCulate[1]|2|3|4:GAIN[:MAGNitude] <numeric_value> . . . . . . . . . .213
CALCulate[1]|2|3|4:GAIN:STATe <boolean> . . . . . . . . . . . . . . . . . . . . .215
CALCulate[1]|2|3|4:LIMit Commands . . . . . . . . . . . . . . . . . . . . . . . . . .217
CALCulate[1]|2|3|4:LIMit:CLEar:AUTo <boolean>|ONCE . . . . . . . . . . .218
CALCulate[1]|2|3|4:Limit:CLEar[:IMMediate] . . . . . . . . . . . . . . . . . . . .220
CALCulate[1]|2|3|4LIMit:FAIL? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221
CALCulate[1]|2|3|4:LIMit:FCOunt? . . . . . . . . . . . . . . . . . . . . . . . . . . . .222
CALCulate[1]|2|3|4:LIMit:LOWer[:DATA] <numeric_value> . . . . . . . . .224

12 Keysight EPM-P Series Programming Guide
CALCulate[1]|2|3|4:LIMit:UPPer[:DATA] <numeric_value> . . . . . . . . . 227
CALCulate[1]|2|3|4:LIMit:STATe <boolean> . . . . . . . . . . . . . . . . . . . . . 229
CALCulate[1]|2|3|4:MATH Commands . . . . . . . . . . . . . . . . . . . . . . . . . 231
CALCulate[1]|2|3|4:MATH[:EXPRession] <string> . . . . . . . . . . . . . . . . 232
CALCulate[1]|2|3|4:MATH[:EXPRession]:CATalog? . . . . . . . . . . . . . . . 235
CALCulate[1]|2|3|4:PHOLd:CLEar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
CALCulate[1]|2|3|4:RELative Commands . . . . . . . . . . . . . . . . . . . . . . . 237
CALCulate[1]|2|3|4:RELative[:MAGNitude]:AUTO <boolean>|ONCE . . 238
CALCulate[1]|2|3|4:RELative:STATe <boolean> . . . . . . . . . . . . . . . . . . 240
4 CALibration Subsystem
CALibration Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
CALibration[1]|2[:ALL] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
CALibration[1]|2[:ALL]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
CALibration[1]|2:AUTO <boolean> . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
CALibration[1]|2:ECONtrol:STATe <boolean> . . . . . . . . . . . . . . . . . . . 252
CALibration[1]|2:RCALibration <boolean> . . . . . . . . . . . . . . . . . . . . . . 253
CALibration[1]|2:RCFactor <numeric_value> . . . . . . . . . . . . . . . . . . . . 255
CALibration[1]|2:ZERO:AUTO <boolean> . . . . . . . . . . . . . . . . . . . . . . . 257
CALibration[1]|2:ZERO:NORMal:AUTO <boolean> . . . . . . . . . . . . . . . 258
5DISPlaySubsystem
DISPlay Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
DISPlay:CONTrast <numeric_value> . . . . . . . . . . . . . . . . . . . . . . . . . . 263
DISPlay:ENABle <boolean> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
DISPlay:SCReen:FORMat <character_data> . . . . . . . . . . . . . . . . . . . . 266
DISPlay[:WINDow[1]|2] Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
DISPlay[:WINDow[1]|2]:ANALog Commands . . . . . . . . . . . . . . . . . . . . 269
DISPlay[:WINDow[1]|2]:ANALog:LOWer <numeric_value> . . . . . . . . . 270
DISPlay[:WINDow[1]|2]:ANALog:UPPer <numeric_value> . . . . . . . . . 272
DISPlay[:WINDow[1]|2]:FORMat <character_data> . . . . . . . . . . . . . . 274

Keysight EPM-P Series Programming Guide 13
DISPlay[:WINDow[1]|2]:METer Commands . . . . . . . . . . . . . . . . . . . . .276
DISPlay[:WINDow[1]|2]:METer:LOWer <numeric_value> . . . . . . . . . .277
DISPlay[:WINDow[1]|2]:METer:UPPer <numeric_value> . . . . . . . . . .279
DISPlay[:WINDow[1]|2][:NUMeric[1]|2]:RESolution <numeric_value> 281
DISPlay[:WINDow[1]|2]:SELect[1]|2 . . . . . . . . . . . . . . . . . . . . . . . . . . .283
DISPlay[:WINDow[1]|2][:STATe] <boolean> . . . . . . . . . . . . . . . . . . . .284
DISPlay[:WINDow[1]|2]:TRACe:FEED <character_data> . . . . . . . . . . .286
DISPlay[:WINDow[1]|2]:TRACe:LOWer <numeric_value> . . . . . . . . . .288
DISPlay[:WINDow[1]|2]:TRACe:UPPer <numeric_value> . . . . . . . . . . .290
6FORMatSubsystem
FORMat Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294
FORMat[:READings]:BORDer <character_data> . . . . . . . . . . . . . . . . .295
FORMat[:READings][:DATA] <character_data> . . . . . . . . . . . . . . . . . .297
7MEMorySubsystem
MEMory Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300
MEMory:CATalog Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .302
MEMory:CATalog[:ALL]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .303
MEMory:CATalog:STATe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305
MEMory:CATalog:TABLe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .306
MEMory:CLEar Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308
MEMory:CLEar[:NAME] <character_data> . . . . . . . . . . . . . . . . . . . . .309
MEMory:CLEar:TABle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .311
The MEMory:FREE Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312
MEMory:FREE[:ALL]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .313
MEMory:FREE:STATe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .314
MEMory:FREE:TABLe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315
MEMory:NSTates? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .316
The MEMory:STATe Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .317
MEMory:STATe:CATalog? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .318

14 Keysight EPM-P Series Programming Guide
MEMory:STATe:DEFine <character_data>,<numeric_value> . . . . . . . 319
MEMory:TABLe Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
MEMory:TABLe:FREQuency <numeric_value>{,<numeric_value>} . . 322
MEMory:TABLe:FREQuency:POINts? . . . . . . . . . . . . . . . . . . . . . . . . . 325
MEMory:TABLe:GAIN[:MAGNitude] <numeric_value>{,<numeric_value>}
326
MEMory:TABLe:GAIN[:MAGNitude]:POINts? . . . . . . . . . . . . . . . . . . . 328
MEMory:TABLe:MOVE <character_data>,<character_data> . . . . . . . 329
MEMory:TABLe:SELect <character_data> . . . . . . . . . . . . . . . . . . . . . 330
8 OUTput Subsystem
OUTPut Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
OUTPut:RECorder[1]|2:FEED <data_handle> . . . . . . . . . . . . . . . . . . . 333
OUTPut:RECorder[1]|2:LIMit:LOWer <numeric_value> . . . . . . . . . . . 335
OUTPut:RECorder[1]|2:LIMit:UPPer <numeric_value> . . . . . . . . . . . . 337
OUTPut:RECorder[1]|2:STATe <boolean> . . . . . . . . . . . . . . . . . . . . . . 339
OUTPut:ROSCillator[:STATe] <boolean> . . . . . . . . . . . . . . . . . . . . . . 340
OUTPut:TRIGger[:STATe] <boolean> . . . . . . . . . . . . . . . . . . . . . . . . . 341
OUTPut:TTL[1]|2:ACTive HIGH|LOW . . . . . . . . . . . . . . . . . . . . . . . . . . 342
OUTPut:TTL[1]|2:FEED <string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
OUTPut:TTL[1|2]:STATe <boolean> . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
9 SENSe Subsystem
[SENSe] Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
[SENSe[1]]|SENSe2:AVERage Commands . . . . . . . . . . . . . . . . . . . . . 354
[SENSe[1]]|SENSe2:AVERage:COUNt <numeric_value> . . . . . . . . . . 355
[SENSe[1]]|SENSe2:AVERage:COUNt:AUTO <boolean> . . . . . . . . . . 357
[SENSe[1]]|SENSe2:AVERage:SDETect <boolean> . . . . . . . . . . . . . . 360
[SENSe[1]]|SENSe2:AVERage[:STATe] <boolean> . . . . . . . . . . . . . . . 362
[SENSe[1]]|SENSe2:AVERage2 Commands . . . . . . . . . . . . . . . . . . . . 363
[SENSe[1]]|SENSe2:AVERage2:COUNt <numeric_value> . . . . . . . . . 364

Keysight EPM-P Series Programming Guide 15
SENSe[1]]|SENSe2:AVERage2[:STATe] <boolean> . . . . . . . . . . . . . . .366
[SENSe[1]]|SENSe2:BANDwidth|BWIDth:VIDeo <character_data> . .368
[SENSe[1]]|SENSe2:CORRection Commands . . . . . . . . . . . . . . . . . . .370
SENSe[1]]|SENSe2:CORRection:CFACtor|GAIN[1][:INPut][:MAGNitude]
<numeric_value> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .371
[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2 Commands . . . . . . .373
[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2[:SELect] <string> .374
[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2:STATe <boolean> .376
[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3 Commands . . . . . .378
[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3[:INPut][:MAGNitude] <nu-
meric_value> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .379
[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3:STATe <boolean> .382
[SENSe[1]]|SENSe2:CORRection:FDOFfset|GAIN4[:INPut][:MAGNitude]?
384
[SENSe[1]]|SENSe2:CORRection:GAIN2 Commands . . . . . . . . . . . . .385
[SENSe[1]]|SENSe2:CORRection:GAIN2:STATe <boolean> . . . . . . . .386
[SENSe[1]]|SENSe2:CORRection:GAIN2[:INPut][:MAGNitude] <numer-
ic_value> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .388
[SENSe[1]]|SENSe2:DETector:FUNCtion <character_data> . . . . . . . .390
[SENSe[1]]|SENSe2:FREQuency[:CW|:FIXed] <numeric_value> . . . . .392
[SENSe[1]]|SENSe2:MRATe <character_data> . . . . . . . . . . . . . . . . . .394
[SENSe[1]]|SENSe2:POWer:AC:RANGe <numeric_value> . . . . . . . . .397
[SENSe[1]]|SENSe2:POWer:AC:RANGe:AUTO <boolean> . . . . . . . . .399
[SENSe[1]]|SENSe2:SPEed <numeric_value> . . . . . . . . . . . . . . . . . . .401
SENSe[1]]|SENSe2:SWEep[1]|2|3|4 Commands . . . . . . . . . . . . . . . . .404
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:OFFSet:TIME <numeric_value> .406
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:TIME <numeric_value> . . . . . . .408
SENSe[1]]|SENSe2:TRACe Commands . . . . . . . . . . . . . . . . . . . . . . . .410
SENSe[1]|2:TRACe:LIMit:LOWer <numeric_value> . . . . . . . . . . . . . . .411
SENSe[1]|2:TRACe:LIMit:UPPer <numeric_value> . . . . . . . . . . . . . . . .413
[SENSe[1]]|SENSe2:TRACe:OFFSet:TIME <numeric_value> . . . . . . . .415

16 Keysight EPM-P Series Programming Guide
[SENSe[1]]|SENSe2:TRACe:TIME <numeric_value> . . . . . . . . . . . . . . 417
[SENSe[1]]|SENSe2:TRACe:UNIT <character_data> . . . . . . . . . . . . . 419
[SENSe[1]]|SENSe2:V2P ATYPe|DTYPe . . . . . . . . . . . . . . . . . . . . . . . . 421
10 STATus Subsystem
STATus Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424
Status Register Set Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426
:CONDition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426
[:EVENt]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427
:ENABle <NRf>|<non-decimal numeric> . . . . . . . . . . . . . . . . . . . . 427
:NTRansition <NRf>|<non-decimal numeric> . . . . . . . . . . . . . . . . 428
:PTRansition <NRf>|<non-decimal numeric> . . . . . . . . . . . . . . . . 429
Device Status Register Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430
Operation Register Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432
STATus:OPERation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
STATus:OPERation:CALibrating[:SUMMary] . . . . . . . . . . . . . . . . . . . . 434
STATus:OPERation:LLFail[:SUMMary] . . . . . . . . . . . . . . . . . . . . . . . . . 435
STATus:OPERation:MEASuring[:SUMMary] . . . . . . . . . . . . . . . . . . . . . 436
STATus:OPERation:SENSe[:SUMMary] . . . . . . . . . . . . . . . . . . . . . . . . 437
STATus:OPERation:TRIGger[:SUMMary] . . . . . . . . . . . . . . . . . . . . . . . 438
STATus:OPERation:ULFail[:SUMMary] . . . . . . . . . . . . . . . . . . . . . . . . 439
STATus:PRESet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440
Questionable Register Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441
STATus:QUEStionable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442
STATus:QUEStionable:CALibration[:SUMMary] . . . . . . . . . . . . . . . . . 443
STATus:QUEStionable:POWer[:SUMMary] . . . . . . . . . . . . . . . . . . . . . 444
Status Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 446
11 SYSTem Subsystem
SYSTem Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <numeric_value> . . . 450
SYStem:COMMunicate:Serial Commands . . . . . . . . . . . . . . . . . . . . . 452

Keysight EPM-P Series Programming Guide 17
SYSTem:COMMunicate:SERial:CONTrol:DTR <boolean> . . . . . . . . . .453
SYSTem:COMMunicate:SERial:CONTrol:RTS <boolean> . . . . . . . . . .455
SYSTem:COMMunicate:SERial[:RECeive]:BAUD <numeric_value> . .456
SYSTem:COMMunicate:SERial[:RECeive]:BITs <numeric_value> . . .458
SYSTem:COMMunicate:SERial[:RECeive]:PACE XON|NONE . . . . . . .460
SYSTem:COMMunicate:SERial[:RECeive]:PARity[:TYPE] EVEN|ODD|ZE-
RO|ONE|NONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .461
SYSTem:COMMunicate:SERial[:RECeive]:SBITs <numeric_value> . .463
SYSTem:COMMunicate:SERial:TRANsmit:AUTO? . . . . . . . . . . . . . . .464
SYSTem:COMMunicate:SERial:TRANsmit:BAUD <numeric_value> . .465
SYSTem:COMMunicate:SERial:TRANsmit:BITs <numeric_value> . . .467
SYSTem:COMMunicate:SERial:TRANsmit:ECHO <boolean> . . . . . . .468
SYSTem:COMMunicate:SERial:TRANsmit:PACE XON|NONE . . . . . . .470
SYSTem:COMMunicate:SERial:TRANsmit:PARity[:TYPE] EVEN|ODD|ZE-
RO|ONE|NONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .471
SYSTem:COMMunicate:SERial:TRANsmit:SBITs <numeric_value> . .473
SYSTem:HELP:HEADers? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .474
SYStem:LOCal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .475
SYSTem:PERSona:MANufacturer<character_data> . . . . . . . . . . . . . .476
SYSTem:PERSona:MANufacturer:DEFault . . . . . . . . . . . . . . . . . . . . .478
SYSTem:PRESet <character_data> . . . . . . . . . . . . . . . . . . . . . . . . . . .479
Preset values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .481
SYSTem:REMote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .513
SYSTem:RINTerface GPIB|RS232|RS422 . . . . . . . . . . . . . . . . . . . . . .514
SYSTem:RWLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .515
SYSTem:VERSion? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .516
12 TRACe Subsystem
TRACe Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .518
TRACe[1]|2[:DATA]? <character_data> . . . . . . . . . . . . . . . . . . . . . . . . .519
TRACe[1]|2:STATe <boolean> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .521

18 Keysight EPM-P Series Programming Guide
TRACe[1]|2:UNIT <character_data> . . . . . . . . . . . . . . . . . . . . . . . . . . 523
13 TRIGger Subsystem
TRIGger Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 526
ABORt[1]|2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 528
INITiate Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 529
INITiate[1]|2:CONTinuous <boolean> . . . . . . . . . . . . . . . . . . . . . . . . . . 530
INITiate[1]|2[:IMMediate] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 532
INITiate:CONTinuous:ALL <boolean> . . . . . . . . . . . . . . . . . . . . . . . . . 533
INITiate:CONTinuous:SEQuence[1]|2 <boolean> . . . . . . . . . . . . . . . . 535
INITiate[:IMMediate]:ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 537
INITiate[:IMMediate]:SEQuence[1]|2 . . . . . . . . . . . . . . . . . . . . . . . . . . 538
TRIGger Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 539
TRIGger[1]|2:DELay:AUTO <boolean> . . . . . . . . . . . . . . . . . . . . . . . . 540
TRIGger[1]|2[:IMMediate] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 542
TRIGger[1]|2:SOURce BUS|EXTernal|HOLD|IMMediate|INTernal[[1]|2] . .
543
TRIGger[:SEQuence]:DELay <numeric_value> . . . . . . . . . . . . . . . . . . 546
TRIGger[:SEQuence]:HOLDoff <numeric_value> . . . . . . . . . . . . . . . . 548
TRIGger[:SEQuence]:HYSTeresis <numeric_value> . . . . . . . . . . . . . . 550
TRIGger[:SEQuence]:LEVel <numeric_value> . . . . . . . . . . . . . . . . . . 552
TRIGger[:SEQuence]:LEVel:AUTO <boolean> . . . . . . . . . . . . . . . . . . . 554
TRIGger[:SEQuence]:SLOPe <character_data> . . . . . . . . . . . . . . . . . 556
TRIGger[:SEQuence[1]|2]:COUNt <numeric_value> . . . . . . . . . . . . . . 558
TRIGger[:SEQuence[1]|2]:DELay:AUTO <boolean> . . . . . . . . . . . . . . 560
TRIGger[:SEQuence[1]|2]:IMMediate . . . . . . . . . . . . . . . . . . . . . . . . . 562
TRIGger[:SEQuence[1]|2]:SOURce BUS|EXTernal|HOLD|IMMediate|INTer-
nal[[1]|2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 563
14 UNIT Subsystem
UNIT Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 568

Keysight EPM-P Series Programming Guide 19
UNIT[1]|2|3|4:POWer <amplitude_unit> . . . . . . . . . . . . . . . . . . . . . . .569
UNIT[1]|2|3|4:POWer:RATio <ratio_unit> . . . . . . . . . . . . . . . . . . . . . . .571
15 SERVice Subsystem
SERVice Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .574
SERVice:BIST:CALibrator <boolean> . . . . . . . . . . . . . . . . . . . . . . . . . .576
SERVice:BIST:FPATH[1]|2:MEASure? . . . . . . . . . . . . . . . . . . . . . . . . . .577
SERVice:BIST:FPATH[1]|2:REFerence <numeric_value> . . . . . . . . . . .578
SERVice:BIST:FPATH[1]|2:STATe <boolean> . . . . . . . . . . . . . . . . . . . .580
SERVice:BIST:TBASe:STATe <boolean> . . . . . . . . . . . . . . . . . . . . . . . .582
SERVice:BIST:TRIGger:LEVel:STATe . . . . . . . . . . . . . . . . . . . . . . . . . .584
SERVice:BIST:TRIGger:TEST? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .585
SERVice:OPTion <character_data> . . . . . . . . . . . . . . . . . . . . . . . . . . .586
SERVice:SENSor[1]|2:CDATe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .587
SERVice:SENSor[1]|2:CORRections:STATe <boolean> . . . . . . . . . . . .588
SERVice:SENSor[1]|2:CPLace? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .590
SERVice:SENSor[1]|2:FREQuency:MAXimum? . . . . . . . . . . . . . . . . . .591
SERVice:SENSor[1]|2:FREQuency:MINimum? . . . . . . . . . . . . . . . . . .592
SERVice:SENSor[1]|2:PCALfactor <cal_factor_data> . . . . . . . . . . . . .593
SERVice:SENSor[1]|2:POWer:AVERage:MAXimum? . . . . . . . . . . . . . .594
SERVice:SENSor[1]|2:POWer:PEAK:MAXimum? . . . . . . . . . . . . . . . . .595
SERVice:SENSor[1]|2:POWer:USABle:MAXimum? . . . . . . . . . . . . . . .596
SERVice:SENSor[1]|2:POWer:USABle:MINimum? . . . . . . . . . . . . . . .597
SERVice:SENSor[1]|2:RADC? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .598
SERVice:SENSor[1]|2:SNUMber? . . . . . . . . . . . . . . . . . . . . . . . . . . . .599
SERVice:SENSor[1]|2:TNUMber? . . . . . . . . . . . . . . . . . . . . . . . . . . . .600
SERVice:SENSor[1]|2:TYPE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .601
SERVice:SNUMber <character_data> . . . . . . . . . . . . . . . . . . . . . . . . .602
SERVice:VERSion:PROCessor <character_data> . . . . . . . . . . . . . . . .603
SERVice:VERSion:SYSTem <character_data> . . . . . . . . . . . . . . . . . .604

20 Keysight EPM-P Series Programming Guide
16 IEEE488.2 Command Reference
IEEE-488 Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 606
Universal Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607
DCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607
GET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607
GTL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607
LLO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607
PPC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 608
PPD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 608
PPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 608
PPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
SDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 609
SPD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 610
SPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 610
*CLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 611
*DDT <arbitrary block program data>|<string program data> . . . . . . 612
*ESE <NRf> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
*ESR? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 616
*IDN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 617
*OPC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 618
*OPT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 619
*RCL <NRf> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620
*RST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621
*SAV <NRf> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 622
*SRE <NRf> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 623
*STB? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
*TRG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 627
*TST? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 628
*WAI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 629