Kidco G4100 User manual

G4111G4110G4100 G4101
USER GUIDE
®
Gateway
EXTENSION KITS
®

C3
C2
Parts list G4100/G4101
AUpper Extension Housing (2)
BLower Extension Housing (2)
C1 Extension Tube 7 7/8” (2)
C2 Extension Tube 10 1/2” (2)
DExtension Bar (2)
Parts list G4110/G4111
C3 Extension Tube 4 3/4” (2)
DExtension
C1
D
A
B
D

1G4100/G4101 (Only)
Housings, bars and square
extension tubes (5 1/8”) from gate
may be needed. Depending on how
many extensions are being added,
insert the appropriate square
extension tubes (c) into gate ends.
Connect the bar (d) to one upper
extension housing (a) and one
lower extension housing (b).
Push assembly over extension
tubes. There should be no metal
showing from extension tubes.
It may be necessary to apply
pressure to tubes to ensure they
are fully inserted into gate ends.
Slide spindles into extension tubes.
2G4110/G4111 (with or
without G4100/G4101)
Insert 43/4” square extension
tubes (c) into gate ends.
Connect the extension (d) to
gate. There should be no
metal showing. It may be
necessary to apply pressure.
Slide spindles into extension.
NOTE: If using additional
extensions, 12.5” extension
needs to be installed to
gate first.
See applicable Gateway®
series user guide to
complete installation.
Installation
1
2
(d)
(c)
(a)
(b) (c)
(c)(c)
(c)(c)
(d)

Extension Placement Guide
Note: Each G4100/G4101 kit contains two extensions •Each G4110/G4111 kit contains one extension
Width Opening Extensions What You Need Placement
29”– 31 ½” Basic Gate No extensions
31 ½” – 34 ½” Included with Gate Gate + 1 extension
34 ½” – 37” Gate + 2 extensions
37” – 40” Gate + 3 extensions
40” – 42 ½” Gate + 4 extensions
42 ½” – 45”
1-G4100/G4101
2-G4100/G4101 Gate + 5 extensions
45” – 47 ½” Gate + 6 extensions
47 ½”-49 ½” 1-G4110/G4111 Gate + 3 extensions
49 ½”-52” 1-1-G4110/G41 Gate + 4 extensions
+ 1-G4100/G4101
52”-55” Gate + 5 extensions
55”-57” 2-G4110/G4111 Gate + 2 extensions
57”-60” Gate + 3 extensions
60”-62” Gate + 4 extensions
62”-65” 2-2-G4110/G41 Gate + 5 extensions
+ 1-G4100/G4101
65”-68” Gate + 6 extensions
68”-70” 2-2-G4110/G41 Gate + 7 extensions
+ 2-G4100/G4101
70”-73 ½” Gate + 8 extensions
-1 on one end
-1 on each end
-2 on one end; 1 on other end
-2 on each end
-3 on one end; 2 on other end
-3 on each end
-G4110/4111 on either end;
1 extension on each end
-1-G4110/4111 + 2 extensions on
one end; 1 extension on other end
-1 G4110/4111 + 2 extensions on
one end; 2 extensions on other end
-1 G4110/4111 on each end
-1 G4110/4111 on each end;
1 extension on one end
-1 G4110/4111 + 1 extension on each end
-1-G4110/4111 + 1 extension on
each end; 1 extension on one end
-1 G4110/4111 + 2 extensions on each end
-1-G4110/4111 + 2 extensions on
each end; 1 extension on one end
-1-G4110/4111 + 3 extensions on each end

Gateway® Series
Extension Kit model G5.5c
(contains two extensions)

FOLLOW THESE INSTRUCTIONS
CAREFULLY AND KEEP THEM FOR
FUTURE REFERENCE
Extensions must be added as shown.
Extension Placement Guide for Center Gateway (Model G15):
291/4”-347/8” Gate + 1 extension - may be placed on either end
341/2”-371/2” Gate + 2 extensions - one on each end
371/4”-401/4” Gate + 3 extensions - 2 on one end, 1 on other end
397/8”-423/4” Gate + 4 extensions - 3 on one end, 1 on other end
425/8”-455/8” Gate + 5 extensions - 3 on one end, 2 on other end
451/2”-481/8” Gate + 6 extensions - 3 on each end
Each end may have no more than 3 extensions.
Extension Placement Guide for Wood Center Gateway (Model G35):
28”-331/2” Gate + 1 extension - may be placed on either end
331/8”-36” Gate + 2 extensions - one on each end
353/4”-383/4” Gate + 3 extensions - 2 on one end, 1 on other end
385/8”-411/2” Gate + 4 extensions - 3 on one end, 1 on other end
411/4”-44” Gate + 5 extensions - 3 on one end, 2 on other end
433/4”-47” Gate + 6 extensions - 3 on each end
Each end may have no more than 3 extensions.
Extension Placement Guide for Gateway (Model G11):
30”-36” Gate + 1 extension
35”-38” Gate + 2 extensions
371/2”-411/2” Gate + 3 extensions
No more than 3 extensions per gate.
Important Information
1. Housings, bars and square extension tubes
(51/8”) from Basic Center Gateway Set may be
needed.
Depending on how many extensions are being
added, insert appropriate square extension
tubes (s or t) into gate ends. Connect the bar (k)
to one upper extension housing (h) and one
lower extension housing (i).
ENG
Installation
Push assembly over extension tubes. There
should be no metal showing from extension
tubes. It may be necessary to apply pressure to
tubes to ensure they are fully inserted into gate
ends. Slide spindles into extension tubes.
See applicable Gateway® series user guide to
complete installation.
Extension Placement Guides
Included with gate
One optional
extension kit
Two optional
extension kits
{
{
{
Included with gate
One optional
extension kit
Two optional
extension kits
{
{
{
Included with gate
One optional
extension kit {
{
{
Must be placed on
opposite side of
handle end

Parts Check List
(h) - 2 (i) - 2 (s) - 2 (77/8”) (t) - 2 (101/2”) (k) - 2
1.
(i)
(h) (s) or (t)
(s) or (t)
(k)
On our website you can discover more about Pet Supplies.