KidKraft ADVENTURE BEND SWING SET User manual

M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
OBSTACLE FREE SAFETY ZONE - 35’-5 1/2” L x 24’-7” D x 16’-9” H (10.8 x 7.5 x 4.9 m) area requires Protective
Surfacing. See page 4.
MAXIMUM VERTICAL FALL HEIGHT - 6’ 6-3/4” (2 m).
CAPACITY - 10 Users Maximum, Ages 3 - 10; Weight Limit 110 lbs. (50 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as multi-unit
residences, schools, churches, nurseries, day cares or parks.
INSTALLATION AND OPERATING INSTRUCTIONS
ASSEMBLY TIME
10 - 14 HOURS
TWO-PERSON
ASSEMBLY
WARNING. ONLY
FOR OUTDOOR
DOMESTIC USE
ADVENTURE
BEND SWING SET
Rev 04/24/20239409720
FOR 24/7 ONLINE PARTS REPLACEMENT
parts.kidkraft.com parts.kidkraft.eu
KidKraft, Inc.
4630 Olin Road
Dallas, Texas 75244
USA
[e-mail] [e-mail]
1.800.933.0771
972.385.0100
[phone]
M-F from 09:00 to 17:30 (GMT+1)
KidKraft Netherlands BV
Olympisch Stadion 8
1076 DE Amsterdam
The Netherlands
To reduce the risk of serious injury or death, please read and follow
these instructions. Keep and refer to instructions as needed and
pass along to any future owners of this item.
WARNING
# F29720
7.5m
24'-7"
10.8m
35'-5 1/2"
3.47m
11'-4 5/8"
6.75m
22'-1 3/4"
2.8m
9'-2 1/2"
Safety Zone
Cover Image

2
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Congratulations on purchasing
a KidKraft product!
Our items are made of high-quality,
durable Cunninghamia Lanceolata wood
from the cypress family.
Lumber from these trees are known for
their light weight and excellent strength.
The porosity of this wood allows the
moisture to absorb and evaporate in the
fibers, resisting rot and bugs.
Engineered for great play, our products
also go through extensive testing for safety.
Plus, our team has developed a series of
proprietary methods for a simpler, more
organized assembly. Less build time and
more play time is our motto!
However, during assembly if you have any
questions or concerns, please reach out.
Our Customer Service can help with missing
parts, instructions or maintenance.

3
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
parts.kidkraft.eu
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
Warnings and Safe Play Instructions
CONTINUOUS ADULT SUPERVISION REQUIRED. Most serious injuries and deaths on playground equipment have occurred
while children were unsupervised! Our products are designed to meet mandatory and voluntary safety standards. Complying
with all warnings and recommendations in these instructions will reduce the risk of serious or fatal injury to children using
this play system. Go over the warnings and safe play instructions regularly with your children and make certain that they
understand and follow them. Remember on-site adult supervision is required for children of all ages.
SERIOUS HEAD INJURY HAZARD
Installation over concrete, asphalt, dirt, grass, carpet
and other hard surface creates a risk of serious injury
or death from falls to the ground. Install and maintain
shock absorbing material under and around play-set as
recommended on page 4 of these instructions.
COLLISION HAZARD
Place play-set on level ground at least 2m from any
obstruction such as a garage or house, fences, poles,
trees, sidewalks, walls, landscape timbers, rocks,
pavement, planters, garden borders, overhanging
branches, laundry lines, and electrical wires. (See
OBSTACLE FREE SAFETY ZONE on cover)
CHOKING HAZARD/SHARP EDGES & POINTS
Adult assembly required. This product contains small
parts and parts with sharp edges and points. Keep parts
away from children until fully assembled.
WARNING LABEL
Owners shall be responsible for maintaining the legibility
of the warning labels.
STRANGULATION HAZARD
,senilsehtolc,seporhtiwyalpotnerdlihcwollaREVEN•
pet leashes, cables, chains or cord-like items when using
this play-set or to attach these items to play-set.
ponchos, hoods, scarves, capes, necklaces, items with
draw-strings, cords or ties when using this play-set.
stemlehtropsroekibraewotnerdlihcwollaREVEN•
when using this play-set.
Failure to prohibit these items, even helmets with chin
straps, increases the risk of serious injury and death to
children from entanglement and strangulation.
TIP OVER HAZARD
Choose a level location for the equipment. This can reduce
the likelihood of the play set tipping over and loose- ll
surfacing materials washing away during heavy rains.
D
Never add extra length to chain or rope. The chains or ropes
provided are the maximum length designed for the swinging
element(s).
O NOT allow children to play on the play-set until the
assembly is complete and the unit is properly anchored.
WARNING
eeS.tes-yalpruoyfosnoitatimilyticapacevresbO
front cover.
gnisolcnetoofllufdnagnittllewhtiwnerdlihcsserD
footwear.
retnecehtnithgiewllufriehthtiwtisotnerdlihchcaeT
of the swing seat to prevent erratic swing motion or
falling off.
,gnissim;doowdekcarcronekorb,deretnilpsrofkcehC
loose, or sharp edged hardware. Replace, tighten and or
sand smooth as required prior to playing.
niahc,sreddalepor,seporgnibmilcdednepsustahtyfireV
or cable are secured at both ends and cannot be looped
back on itself as to create an entanglement hazard.
rehtodnaedilsehtkcehc,syadtohrodnaynnusnO
plastic rides to assure that they are not very hot as to
cause burns. Cool hot slide and rides with water and wipe
dry prior to using.
raewtoofleehroeotneporaewotnerdlihcwollatonoD
like sandals, ip– ops or clogs.
dniheb,neewteb,tnorfni,klawotnerdlihcwollatonoD
or close to moving rides.
poolroseporrosniahcgniwstsiwtnerdlihcteltonoD
them over the top support bar. This may reduce the
strength of the chain or rope and cause premature failure.
.noitomnierayehtelihwsedirffotegnerdlihcteltonoD
.tewsitinehwtnempiuqenognibmilctimreptonoD
anitnempiuqefoesuroyalphguortimreptonoD
manner for which it was not intended. Standing on or
jumping from the roof, elevated platforms, swings,
climbers, ladders or slide can be dangerous.
.staesrosedirytpmegniwsotnerdlihcwollatonoD
rotsrdaehedilsnwodogotnerdlihcwollatonoD
run up slide.
WARNING – Safe Play Instructions
Orientate slide such that it gets the least amount of exposure
to the sun.

4
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing
protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable
for the equipment height in accordance with ASTM F1292. There are different types of surfacing to choose from; whichever
product you select, follow these guidelines:
Loose-Fill Materials
• M
aintain a minimum depth of 9 inches (23 cm) of loose-fill materials such as wood mulch/chips, engineered wood fiber (EWF), or
shredded/recycled rubber mulch for equipment up to 8 feet (2.45 m) high; and 9 inches (23 cm) of sand or pea gravel for equipment up to 5 feet (1.5 m)
high. NOTE: An initial fill level of 12 inches (31 cm) will compress to about a 9-inch (23 cm) depth of surfacing over time. The surfacing will also
compact, displace, and settle, and should be periodically raked and refilled to maintain at least a 9-inch (23 cm) depth.
• U
se a minimum of 6 inches (16 cm) of protective surfacing for play equipment less than 4 feet (1.22 m) in height. If maintained properly, this
should be adequate. (At depths less than 6 inches (16 cm), the protective material is too easily displaced or compacted.)
NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface
can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and
environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are not adequate protective
surfacing. Ground level equipment -- such as a sandbox, activity wall, playhouse or other equipment that has no elevated play
surface-- does not need any protective surfacing.
• Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don’t forget to
account for water drainage.
• Periodically rake, check and maintain the depth of the loose-fill surfacing material. Marking the correct depth on the play
equipment support posts will help you to see when the material has settled and needs to be raked and or replenished. Be sure to
rake and evenly redistribute the surfacing in heavily used areas.
• Do not install loose fillsurfacing over hard surfaces such as concrete or asphalt.
Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles
You may be interested in using surfacing other than loose-fill materials - like rubber tiles or poured-in-placesurfaces.
• Installations of these surfaces generally require a professional and are not “do-it yourself ” projects.
• Review surfacespecifications before purchasing this type of surfacing. Ask the installer/manufacturer for a report showing that
the product has been tested to the following safety standard: ASTM F1292 Standard Specification for Impact Attenuation of Surfacing
Materials within the Use Zone of Playground Equipment. This report should show the specific height for which the surfaceis intended
to protect against serious head injury. This height should be equal to or greater than the fall height - vertical distance between a
designated play surface (elevated surface for standing, sitting, or climbing) and the protective surfacing below - of your play equipment.
• Check the protective surfacing frequently for wear.
Placement
Proper placement and maintenance of protective surfacing is essential. Refer to diagram on front cover. Be sure to;
• Extend surfacing at least 6 feet (1.8 m) from the equipment in all directions.
• For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to twice the height of the top
bar from which the swing is suspended.
• F
or tire swings, extend surfacing in a circle whose radius is equal to the height of the suspending chain or rope, plus 6 feet (1.8 m) in all directions.
Protective Surfacing-Reducing Risk of Serious Head Injury From Falls
From the CPSC Outdoor Home Playground Safety Handbook. At http://www.playgroundregs.com/resources/CPSC%20324.pdf
Denotes Use Zone with Protective Surfacing
Denotes Use Zone with Protective Surfacing
6 ft.
6 ft.
6 ft. (1.8m)
6 ft. (1.8m)
(1.8m)
6 ft.
(1.8m)
(1.8m) 6 ft.
(1.8m)
6 ft.
(1.8m)
Use Zone for Multi-Axis SwingsUse Zone for Single-Axis Swings

5
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
parts.kidkraft.eu
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
Instructions for Proper Maintenance
sand and repaint using a non-lead paint
splinteringof wood.
Check for sharp edges or protrudingscrew threads, add
washers if required.
fill protective surfacing materials to prevent compaction and
Check for looseness, damage ordeterioration. Should firmly
if necessary.
Check that bolts are secure and tight. Quick clips should be
completely closed and threaded clips screwed tight.
parts including swingseats, ropes, chains and attachments
Check that ropes are tight, secure at both ends and cannot
loop back as to create an entrapment.
Check all wood members fordeterioration, structural
damage and splintering. Sand down splinters and replace
deteriorated wood members. As with all wood, some
checking and small cracks in grain is normal.
basis is important maintenance to maintain maximum life
and performance oftheproduct.
Check the following at the beginning of the play season:
This will causesplinteringof wood.
Check for sharp edges orprotrudingscrew threads.
Add washers ifrequired.
materials to prevent compaction and maintain appropriate
Check twice a month during play season:
Check that they are secure and orientated correctly. Hook
should rotate freely and perpendicular to support beam.
Check swingseats, all ropes, chains and attachments for
fraying, wear, excessive corrosion ordamage.
Check once a month during play season:
To prolongtheir life, remove swings and store insidewhen
plasticparts may become morebrittle.
materials to prevent compaction and maintain appropriate
Check at the end of the play season:
If you disposeof your play set:
hazards at thetime it is discarded. Besure to follow yourlocal wasteordinances.
beyond T-Nut
flat washer
Your KidKraft Play System is designed and constructed of quality materials with your child’s safety in mind. As with
all outdoor products used by children, it will weather and wear. To maximize the enjoyment, safety and life of your
Play Set, it is important that you, the owner, properly maintain it.
4
4
4

6
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
About Our Wood
KidKraft Premium Play Systems uses only premium playset lumber, ensuring the safest product for your
children’s use. Although we take great care in selecting the best quality lumber available, wood is still a
product of nature and susceptible to weathering which can change the appearance of your set.
What causes weathering? Does it affect the strength of my Play System?
One of the main reasons for weathering is the effects of water (moisture); the moisture content of the wood
at the surface is different than the interior of the wood. As the climate changes, moisture moves in or out
of the wood, causing tension which can result in checking and or warping. You can expect the following
due to weathering. These changes will not affect the strength of the product:
1. Checking is surface cracks in the wood along the grain. A post 4” x 4” (101mm x 101mm) will experience
more checking than a board 1” x 4” (25mm x 101mm) because the surface and interior moisture content
will vary more widely than in
thinner wood.
2. Warping results from any distortion (twisting, cupping) from the original plane of the board and often
happens from rapid wetting and drying of the wood.
3. Fading happens as a natural change in the wood color as it is exposed to sun-light and will turn a grey
over time.
How can I reduce the amount of weathering to my Play System?
At the factory we have coated the wood with a water repellent or stain. This coating decreases the amount
of water absorption during rain or snow thus decreasing the tension in the wood. Sunlight will break down
the coating, so we recommend applying a water repellent or stain on a yearly basis (see your local stain
and paint supplier for a recommended product).
Most weathering is just the normal result of nature and will not affect safe play and enjoyment for your
child. However if you are concerned that a part has experienced a severe weathering problem please call
our consumer relations department for further assistance.
Complete and mail registration card to receive important product notifications and assure prompt
warranty service.

7
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
parts.kidkraft.eu
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
KidKraft Limited Warranty
MISSING OR DAMAGED PARTS:
KidKraft will replace any parts within 90 days from date of purchase found to be missing from or
damaged in the original packaging. See Fig.1
Fig. 1 Product Age (All Parts) Consumer Pays
0-90 Days from date of purchase $0 for Part + Free Shipping
DEFECTS IN MATERIAL AND WORKMANSHIP:
KidKraft warrants that this product is free from defects in materials and workmanship for a period of one
(1) year from the original date of purchase (dated sales receipt and/or product registration is required).
This one (1) year warranty covers all parts including wood, hardware, and all accessories (Such as
swings, rides, and slides). See Fig. 2
Fig. 2 Product Age (All Parts) Consumer Pays
91 Days to 1 Year $0 for Part + Free Shipping
WOOD ROT, DECAY, AND INSECT DAMAGE:
All wood carries a five (5) year warranty against rot, decay, and insect damage (dated sales receipt
and/or product registration is required). Refer tothe schedule below for charges associated with
replacement of wood parts under this Limited Warranty. See Fig. 3
Fig. 3 Product Age (Wood Parts) Consumer Pays
0 Days to 1 Year $0 for Part + Free Shipping
After 1 Year to 5 Year $0 for Part + Shipping & Handling
Over 5 Years 100% for Part (if available) + Shipping & Handling
This warranty applies to the original owner and registrant and is non-transferable. Regular maintenance
is required to ensure the integrity of this product. Failure by the owner to maintain the product according
to the maintenance requirements may void this warranty.
This Limited Warranty does NOT cover:
• Any inspection cost
• Labor and/or costs for replacement of any defective item(s), including but not limited to,
professional installer costs
• Incidental or consequential damages, including but not limited to, as a result of set relocation,
move and/or reinstall
• Cosmetic defects which do not affect performance or integrity of a part or the entire product
• Vandalism, improper use or installation, or acts of nature, including but not limited to, high winds,
fire, and flood
• Minor twisting, warping, checking, or any natural occurring properties of wood that do not affect
performance or integrity.
• Any KidKraft product purchased, including but not limited to, a non-approved retailer, auction
houses, second-hand, and as-is clearance items.
KidKraft products have been designed for safety and quality. Modifications made to the original product
may damage the structural integrity of the unit leading to failure and possible injury. KidKraft cannot
assume any responsibility for the modified products. Furthermore, modifications void all warranties.
This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a KidKraft
product be used in public settings such as schools, churches, playgrounds, parks, home and
professional day cares and the like. Such use may lead to product failure and potential injury. Public use
will void this warranty. KidKraft disclaims all other representations and warranties of any kind, express or
implied.

8
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Battery Instruction and Warranty
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ-
ing interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio /TV technician for help.
Note: Changes or modications not expressly approved by the manufacturer responsible for compliance could void
the user’s authority to operate the equipment.
Please retain the information on this pack for future reference.
- Batteries should always be installed and changed under adult supervision.
- Non-Rechargeable batteries are not to be recharged.
- Rechargeable batteries are only to be charged under adult supervision.
- Only batteries of the same equivalent type as recommended are to be used.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the toy and disposed of properly.
- The supply terminals are not to be short circuited.
- Different types of batteries or new and used batteries are not to be mixed.
- DO NOT mix alkaline, standard (carbon-zinc) or rechargeable batteries.
- Be sure to insert new batteries with positive (+) side up.
- Rechargeable batteries are to be removed from the toy before being charged.
- EU Regulations require exhausted batteries to be separately collected so that they can be treated using the best
available recovery and recycling techniques. This will minimize the impact on the environment and human health from
soil and water contamination by any hazardous substances, decrease the resources required to make new products and
avoid using up landll space.
- Batteries or battery packs must be recycled or disposed of properly. When the batteries in this product have reached
the end of their useful life, they should not be disposed of with other household waste.
- Please do your part by keeping waste batteries out of the municipal waste stream!
Supplier's Declaration of Conformity
Unique Identifier: F29720
Party issuing Supplier's Declaration of Conformity
Responsible Party - U.S. Contact Information
KidKraft, Inc.
4630 Olin Road
Dallas, Texas 75244 U.S.A.
[email protected]
1(800) 933-0771 / [phone]
FCC Compliance Statement (for products subject to Part 15)
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Declaración de conformidad del proveedor
Identificador único: F29720
Parte emisora de la Declaración de conformidad del proveedor
Parte responsable. Información de contacto en EE. UU.
KidKraft, Inc.
4630 Olin Road
Dallas, Texas 75244, Estados Unidos
[email protected]
1(800) 933-0771 / [phone]
Declaración de conformidad de la FCC (para los
productos sujetos a la parte 15)
Este dispositivo cumple con la parte 15 de las normas de la
Comisión Federal de Comunicaciones (Federal
Communications Commission, FCC). Su funcionamiento está
sujeto a las siguientes dos condiciones: (1) Este dispositivo no
debería causar interferencia dañina y (2) debe aceptar toda
interferencia recibida, incluida aquella que pueda dar como
resultado un funcionamiento no deseado.
Konformitätserklärung des Lieferanten
Identifikationsnummer: F29720
Ausstellende Partei der Konformitätserklärung des Lieferanten
Verantwortliche Partei – Kontaktinformationen USA
KidKraft, Inc.
4630 Olin Road
Dallas, Texas 75244, USA
[email protected]
1(800) 933-0771 / [phone]
FCC-Konformitätserklärung (für Produkte unter Teil 15)
Dieses Gerät erfüllt die Anforderungen in Teil 15 der
FCC-Vorschriften. Für den Betrieb gelten die folgenden zwei
Bedingungen: (1) Das Gerät darf keine schädlichen
Interferenzen verursachen und (2) das Gerät muss
empfangene Interferenzen aufnehmen können, auch wenn
diese zu Betriebsstörungen führen.
Parte che rilascia la dichiarazione di conformità del fornitore
Parte responsabile - Informazioni di contatto negli Stati Uniti
KidKraft, Inc.
4630 Olin Road
Dallas, Texas 75244 Stati Uniti
[email protected]
1(800) 933-0771 / [phone]
Identificatore unico: F29720
Dichiarazione di conformità del fornitore
Dichiarazione di conformità FCC
(per i prodotti soggetti alla parte 15)
Questo dispositivo è conforme alla parte 15 delle norme FCC.
L'operazione è soggetta alle seguenti due condizioni: (1)
Questo dispositivo non può causare interferenze dannose e
(2) questo dispositivo deve accettare qualsiasi interferenza
ricevuta, incluse quelle che potrebbero causare un
funzionamento indesiderato.
Déclaration de conformité du fournisseur
Identificateur unique : F29720
Partie délivrant la déclaration de conformité du fournisseur
Partie responsable - Coordonnées de la personne à contacter
aux É.-U.
KidKraft, Inc.
4630 Olin Road
Dallas, Texas 75244, États-Unis
[email protected]
1(800) 933-0771 / [phone]
Déclaration de conformité FCC (pour les produits
soumis à la section 15)
Cet appareil est conforme à la section 15 des règlements de
la FCC. Le fonctionnement est assujetti aux deux conditions
suivantes : (1) Cet appareil ne doit pas causer des
interférences nuisibles, et (2) cet appareil doit accepter toute
interférence reçue, incluant une interférence qui pourrait
causer un fonctionnement indésirable.
parts.kidkraft.com
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.eu
e[email protected]m
[phone]
M-F from 09:00 to 17:30 (GMT+1)

9
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
parts.kidkraft.eu
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
This identifies information that requires special
attention. Improper assembly could lead to an unsafe
or dangerous condition.
Where this is shown, 2 or 3 people
are required to safely complete the
step. To avoid injury or damage
to the assembly make sure to get
help!
Check that assembly is square
before tightening bolts.
Use a measuring tape to assure
proper location.
Check that set or assembly is properly level
before proceeding.
Pre-drill a pilot hole
before fastening screw
or lag to prevent
splitting of wood.
This indicates time to tighten bolts, but
not too tight! Do not crush the wood.
This may create splinters and cause
structural damage.
Part Identification Key
On each page, you will find the parts
and quantities required to complete the
assembly step illustrated on that page.
Here is a sample.
Key Number: The first two digits
represent the step number. The third
digit represents the piece. Note that if
the part is used in multiple steps then
the number only reflects the first step it
is used in.
Symbols
Throughout these instructions symbols are provided as important reminders for proper and safe assembly.
Proper Hardware Assembly
Lag screws require drilling pilot
holes to avoid splitting wood. Only
a flat washer is required. For ease of
installation liquid soap can be used
on all lag-type screws.
For bolts, tap T-Nut into hole with
hammer. Insert the hex bolt through
lock washer first then flat washer then
hole. Because the assemblies need to
be squared do not completely tighten
until instructed. Pay close attention to
diameter of the bolts. 5/16” (8mm) is slightly
larger than 1/4” (6.4mm).
Note: Wafer head bolts with blue lock
tight or a bolt with a Ny-Lok nut do
NOT require a lock washer.
Once the assembly is tightened, watch for exposed threads.
If a thread protrudes from the T-Nut, remove
the bolt and add washers to eliminatethis condition.
Extra washers have been provided for this purpose.
Use
Help
Use
Help
Measure
Distance
Square
Assembly
Use
Level
Pre-drill 1/8”(3mm) Bit
Tighten
Bolts
CAUTION – Protrusion Hazard
Keys to Assembly Success
Tools Required
Quantity Key Number Part Description,
Part Size
2X 1012 P
No Yes
Lag Assembly
Bolt Assembly
Flat Washer
Lag Screw
Hex Bolt
Lock
Washer
Flat
Washer
Before mounting Lag
Screw, use factory drilled
holes as guides to drill 1/8”
(3.2mm) pilot holes
T-Nut
(Hammer into place)
Do not crush wood!
If Bolt protrudes
beyond T-Nut
Use an extra
flat washer
• Tape Measure
• Carpenters Level
• Carpenters Square
• Claw Hammer
• Standard or Cordless Drill
• Rubber Mallet
• #1 Phillips, #2 Robertson
and Screwdriver
• Ratchet with extension
1/2” (13mm) & 7/16”(11 mm)
sockets
• Open End Wrench
1/2” (13mm) & 7/16”(11 mm)
• Adjustable Wrench
• 1/8”(3mm) & 3/16”(5mm)
Drill Bits
• 3/16”(5mm) Hex Key
• 8’ (2.4m) Step Ladder
• Safety Glasses
• Adult Helpers
• Pencil
3mm
ost 2 x 4 x 83” (5 cm x 10 cm x 210 cm)

10
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Part Identication (Reduced Size)
2x - 11296 - 34.9 mm x 85.7 mm x 2336.8 mm - 36311296 1 3/8" x 3 3/8" x 92"
2x - 11297 - 31.8 mm x 76.2 mm x 939.8 mm - 36311297
1 1/4" x 3" x 37"
7x - 11298 - 31.8 mm x 76.2 mm x 939.8 mm - 36311298
1 1/4" x 3" x 37"
1x - 11299 - 31.8 mm x 133.4 mm x 939.8 mm - 36311299
1 1/4" x 5 1/4" x 37"
4x - 11300 - 34.9 mm x 85.7 mm x 2260.6 mm - 36311300 1 3/8" x 3 3/8" x 89"
2x - 11301 - 31.8 mm x 76.2 mm x 939.8 mm - 36311301
1 1/4" x 3" x 37"
3x - 11302 - 31.8 mm x 76.2 mm x 1092.2 mm - 36311302
1 1/4" x 3" x 43"
2x - 11303 - 31.8 mm x 76.2 mm x 1092.2 mm - 36311303
1 1/4" x 3" x 43"
2x - 11304 - 31.8 mm x 76.2 mm x 1060.4 mm - 36311304
1 1/4" x 3" x 41 3/4"
2x - 11305 - 38.1 mm x 38.1 mm x 965.2 mm - 36311305
1 1/2" x 1 1/2" x 38"
10x - 11306 - 15.9 mm x 136.5 mm x 935.8 mm - 35811306
5/8" x 5 3/8" x 36 13/16"
2x - 11307 - 15.9 mm x 114.3 mm x 939.8 mm - 36311307
5/8" x 4 1/2" x 37"
Part Identification (Reduced Part Size)

11
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
parts.kidkraft.eu
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
Part Identication (Reduced Size)
1x - 11308 - 31.8 mm x 76.2 mm x 1009 mm - 36311308
1 1/4" x 3" x 39 3/4"
5x - 11310 - 15.9 mm x 63.5 mm x 750.6 mm - 36311310
5/8" x 2 1/2" x 29 9/16"
22x - 11311 - 15.9 mm x 76.2 mm x 609.6 mm - 36311311
5/8" x 3" x 24"
1x - 11312 - 23.8 mm x 108 mm x 1059.8 mm - 35811312
15/16" x 4 1/4" x 41 3/4"
8x - 11313 - 31.8 mm x 76.2 mm x 914.4 mm - 36311313
1 1/4" x 3" x 36"
1x - 11314 - 15.9 mm x 63.5 mm x 609.6 mm - 36311314
5/8" x 2 1/2" x 24"
8x - 11315 - 31.8 mm x 76.2 mm x 442 mm - 36311315
1 1/4" X 3" X 17 3/8"
4x - 11316 - 31.8 mm x 76.2 mm x 384.1 mm - 36311316
1 1/4" X 3" X 15 1/8"
2x - 11317 - 15.9 mm x 136.5 mm x 935.8 mm - 35811317
5/8" x 5 3/8" x 36 13/16"
1x - 11318 - 15.9 mm x 63.5 mm x 935.8 mm - 35811318
5/8" x 2 1/2" x 36 13/16"
1x - 11319 - 15.9 mm x 76.2 mm x 935.8 mm - 35811319
5/8" x 3" x 36 13/16"
2x - 11320 - 34.9 mm x 85.7 mm x 2336.8 mm - 36311320 1 3/8" x 3 3/8" x 92"
2x - 11321 - 31.8 mm x 76.2 mm x 832.2 mm - 36311321
1 1/4" x 3" x 32 3/4"
Part Identification (Reduced Part Size)

12
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Part Identication (Reduced Size)
2x - 11322 - 31.8 mm x 76.2 mm x 832.2 mm - 36311322
1 1/4" x 3" x 32 3/4"
1x - 11323 - 31.8 mm x 76.2 mm x 800.4 mm - 36311323
1 1/4" x 3" x 31 1/2"
2x - 11324 - 38.1 mm x 38.1 mm x 708.7 mm - 36311324
1 1/2" x 1 1/2" x 27 7/8"
1x - 11325 - 31.8 mm x 76.2 mm x 749 mm - 36311325
1 1/4" x 3" x 29 1/2"
1x - 11326 - 31.8 mm x 133.4 mm x 800.4 mm - 36311326
1 1/4" x 5 1/4" x 31 1/2"
2x - 11327 - 31.8 mm x 76.2 mm x 1059.8 mm - 36311327
1 1/4" x 3" x 41 3/4"
2x - 11328 - 31.8 mm x 76.2 mm x 1212.85 mm - 36311328
1 1/4" x 3" x 47 3/4"
1x - 11329 - 31.8 mm x 63.5 mm x 1212.85 mm - 36311329
1 1/4" x 2 1/2" x 47 3/4"
1x - 11330 - 31.8 mm x 63.5 mm x 1212.85 mm - 36311330
1 1/4" x 2 1/2" x 47 3/4"
4x - 11331 - 31.8 mm x 76.2 mm x 314 mm - 36311331
1 1/4" x 3" x 12 3/8"
1x - 11332 - 31.8 mm x 76.2 mm x 1059.8 mm - 36311332
1 1/4" x 3" x 41 3/4"
1x - 11333 - 31.8 mm x 76.2 mm x 1059.8 mm - 36311333
1 1/4" x 3" x 41 3/4"
1x - 11334 - 31.8 mm x 76.2 mm x 1059.8 mm - 36311334
1 1/4" x 3" x 41 3/4"
Part Identification (Reduced Part Size)

13
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
parts.kidkraft.eu
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
Part Identication (Reduced Size)
1x - 11335 - 15.9 mm x 63.5 mm x 609.6 mm - 36311335
5/8" x 2 1/2" x 24"
5x - 11336 - 11.9 mm x 82.6 mm x 954 mm - 36311336
7/16" x 3 1/4 x 37 9/16“
2x - 11337 - 31.8 mm x 63.5 mm x 679 mm - 36311337
1 1/4" x 2 1/2" x 26 3/4"
4x - 11338 - 31.8 mm x 57.2 mm x 158 mm - 36311338
1 1/4" x 2 1/4" x 6 1/4"
1x - 11339 - 11.9 mm x 69.9 mm x 954 mm - 36311339
7/16" x 2 3/4" x 37 9/16"
1x - 11340 - 31.8 mm x 76.2 mm x 1059.8 mm - 36311340
1 1/4" x 3" x 41 3/4"
7x - 11341 - 15.9 mm x 136.5 mm x 700.8 mm - 35811341
5/8" x 5 3/8" x 27 9/16"
4x - 11342 - 31.8 mm x 76.2 mm x 1059.8 mm - 36311342
1 1/4" x 3" x 41 3/4"
2x - 11343 - 38.1 mm x 38.1 mm x 1053.8 mm - 36311343
1 1/2" x 1 1/2" x 41 1/2"
14x - 11344 - 15.9 mm x 63.5 mm x 558.8 mm - 36311344
5/8" x 2 1/2" x 22"
2x - 11345 - 31.8 mm x 76.2 mm x 982 mm - 35811345
1 1/4" x 3" x 38 11/16"
8x - 11346 - 31.8 mm x 69.9 mm x 834.2 mm - 35811346
1 1/4" x 2 3/4" x 32 13/16"
2x - 11347 - 31.8 mm x 69.9 mm x 771.5 mm - 35811347
1 1/4" x 2 3/4" x 30 3/8"
Part Identification (Reduced Part Size)

14
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Part Identication (Reduced Size)
2x - 11348 - 31.8 mm x 69.9 mm x 771.5 mm - 35811348
1 1/4" x 2 3/4" x 30 3/8"
2x - 11349 - 31.8 mm x 76.2 mm x 939.8 mm - 36311349
1 1/4" x 3" x 37"
2x - 11350 - 31.8 mm x 76.2 mm x 860.2 mm - 36311350
1 1/4" x 3" x 33 7/8"
4x - 11351 - 15.9 mm x 136.5 mm x 508 mm - 35811351
5/8" x 5 3/8" x 20"
2x - 11352 - 34.9 mm x 63.5 mm x 1500 mm - 36311352
1 3/8" x 2 1/2" x 59 1/16"
6x - 11353 - 15.9 mm x 136.5 mm x 508 mm - 35811353
5/8" x 5 3/8" x 20"
1x - 11354 - 15.9 mm x 101.6 mm x 508 mm - 35811354
5/8" x 4" x 20"
1x - 11355 - 34.9 mm x 63.5 mm x 1490 mm - 36311355
1 3/8" X 2 1/2" X 58 11/16"
4x - 10892 - 23.8 mm x 82.6 mm x 539.8 mm - 36310892
15/16" x 3 1/4" x 21 1/4"
1x - 11356 - 34.9 mm x 63.5 mm x 1490 mm - 36311356
1 3/8" X 2 1/2" X 58 11/16"
1x - 11357 - 15.9 mm x 76.2 mm x 577.8 mm - 36311357
5/8" x 3" x 22 3/4"
2x - 11358 - 31.8 mm x 76.2 mm x 508 mm - 36311358
1 1/4" x 3" x 20"
Part Identification (Reduced Part Size)

15
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
parts.kidkraft.eu
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
Part Identication (Reduced Size)
2x - 11359 - 15.9 mm x 63.5 mm x 986.8 mm - 36311359
5/8" x 2 1/2" x 38 7/8"
3x - 11360 - 31.8 mm x 63.5 mm x 379.71 mm - 36311360
1 1/4" x 2 1/2" x 14 15/16"
3x - 11361 - 15.9 mm x 136.5 mm x 986.8 mm - 35811361
5/8" x 5 3/8" x 38 7/8"
1x - 9122 - 34.9 mm x 85.7 mm x 254 mm - 3589122
1 3/8" x 3 3/8" x 10"
1x - 11270 - 31.8 mm x 76.2 mm x 880.8 mm - 36311270
1 1/4" x 3" x 34 11/16"
1x - 11271 - 31.8 mm x 76.2 mm x 510 mm - 36311271
1 1/4" x 3" x 20 1/16"
1x - 11362 - 15.9 mm x 101.6 mm x 700.8 mm - 35811362
5/8" x 4" x 27 9/16"
1x - 10915 - 50.8 mm x 133.4 mm x 2235.2 mm - 36310915
2" x 5 1/4" x 88"
1x - 11363 - 50.8 mm x 76.2 mm x 1402.3 mm - 36311363
2" x 3" x 55 3/16"
2x - 10917 - 50.8 mm x 76.2 mm x 2100 mm - 36310917
2" x 3" x 82 11/16"
1x - 2616 - 23.8 mm x 82.6 mm x 1181.1 mm - 3632616
15/16" x 3 1/4" x 46 1/2"
4x - 11364 - 15.9 mm x 136.5 mm x 770 mm - 35811364
5/8" x 5 3/8" x 30 5/16"
1x - 2715 - 25.4 mm x 63.5 mm x 254 mm - 3632715
1" x 2 1/2" x 10"
1x - 2658 - 61.1 mm x 171.5 mm x 863.6 mm - 37632658
2 13/32" x 6 3/4" x 34"
Part Identification (Reduced Part Size)

16
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Part Identication (Reduced Size)
1x - 9468 - 37589468
31.8 mm x 424.2 mm x 1086.8 mm
1 1/4" x 16 11/16" x 42 13/16"
2x - 9469 - 37589469
31.8 mm x 405 mm x 1086.8 mm
1 1/4" x 15 15/16" x 42 13/16"
1x - 9470 - 37589470
31.8 mm x 418.7 mm x 1086.8 mm
1 1/4" x 16 1/2" x 42 13/16"
1x - 9471 - 37589471
31.8 mm x 424.2 mm x 826.8 mm
1 1/4" x 16 11/16" x 32 9/16"
2x - 9472 - 37589472
31.8 mm x 405 mm x 826.8 mm
1 1/4" x 15 15/16" x 32 9/16"
1x - 9473 - 37589473
31.8 mm x 417.9 mm x 826.8 mm
1 1/4" x 16 7/16" x 32 9/16"
1x - 9474 - 37589474
31.8 mm x 424.2 mm x 951.8 mm
1 1/4" x 16 11/16" x 37 1/2"
2x - 9475 - 37589475
31.8 mm x 339.6 mm x 951.8 mm
1 1/4" x 13 3/8" x 37 1/2"
Part Identification (Reduced Part Size)

17
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
parts.kidkraft.eu
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
Part Identication (Reduced Size)
1x - 9477 - 37589477
31.8 mm x 400.1 mm x 1028.6 mm
1 1/4" x 15 3/4" x 40 1/2"
1x - 531 532 - 37588068
38.1 mm x 338.1 mm x 503.2 mm
1 1/2" x 13 5/16" x 19 13/16"
1x - 9478 - 37639478
31.8 mm x 76.2 mm x 1212.9 mm
1 1/4" x 3" x 47 3/4"
1x - 9479 - 37639479
31.8 mm x 76.2 mm x 1212.9 mm
1 1/4" x 3" x 47 3/4"
1x - 9476 - 37589476
31.8 mm x 417.9 mm x 951.8 mm
1 1/4" x 16 7/16" x 37 1/2"
Part Identification (Reduced Part Size)

18
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Hardware Identication (Actual Size)
11 x LW1 - 1/4" - 51303200
6.4mm
114 x LW2 - 5/16" - 51303300
7.9mm
8 x FW6 - #12 - 9299500
207 x FW2 - 5/16" - 51103300
7.9mm
36 x FW1 - 1/4" - 51103200
6.4mm
101 x TN2 - 5/16"
-
54503300
7.9mm
5 x TN1 - 1/4"
-
54503200
6.4mm
144 x S0 - #8 x 7/8" - 52933505
22.2mm
72 x S3 - #8 x 2-1/2" - 52043522
63.5mm
26 x S4 - #8 x 3" - 52043530
76.2mm
19 x S6 - #12 x 1" - 52433610
25.4mm
58 x S7 - #12 x 2" - 52433620
50.8mm
6 x S10 - #8x 1" - 52433510
25.4mm
64 x S11 - #8 x 2" - 52043520
50.8mm
4 x S18 -
#6 x 1"
- 52013910
25.4mm
292 x S20 - #8 x 1-3/8" - 52043516
34.9mm
23 x S37 - #7 x 5/8" - 52433009
15.9mm
12 x WL3 - 1/4 x 1-3/8" - 52613216
6.4 x 34.9mm 6.4 x 63.5mm
16 x WL5 - 1/4 x 2-1/2" - 52613222
66 x LN1 - 1/4" - 54303200
6.4mm
51 x LN2 - 5/16" - 54303300
7.9mm
44 x S2 - #8 x 1-1/2" - 52043512
38.1mm
4 x S38 - #7 x 1-1/8" - 52433014
28.6mm
6 x BN1 - 1/4"
-
54803200
6.4mm
6 x FW0 - 3/16" - 51103100
4.8mm
Part Identification (Reduced Part Size)
8 x S24 - #10 x 4" - 52043940
101.6mm

19
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
parts.kidkraft.eu
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
Hardware Identication (Actual Size)
11 x PB6 - 1/4 x 1" - 53413210
6.4 x 25.4mm
6 x PB2 - 1/4 x 1-1/4" - 53433212
6.4 x 31.8mm
24 x G6 - 5/16 x 4-3/4" - 53703343
7.9 x 120.7mm
6 x G8 - 5/16 x 2" - 53703320
7.9 x 50.8mm 7.9 x 63.5mm
8 x G9 - 5/16 x 2-1/2" - 53703322
7.9 x 76.2mm
8 x G10 - 5/16 x 3" - 53703330
7.9 x 127mm
6 x G22 - 5/16 x 5" - 53703350
37 x G36 - 5/16 x 2-3/4" - 53703323
7.9 x 69.9mm
- 5/16 x 3-1/4" - 53703331
16 x G35
7.9 x 82.6mm
7.9 x 88.9mm
8 x G11 - 5/16 x 3-1/2" - 53703332
Part Identification (Reduced Part Size)
54 x PB1 - 1/4 x 3/4"- 53453203
6.4 x 19.1mm
7.9 x 101.5mm
3 x G4 - 5/16 x 4" - 53703340

20
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Hardware Identication (Actual Size)
4 x WB2 - 5/16 x 1-3/8" - 53613316
7.9 x 34.9mm
7.9 x 25.4mm
28 x WB1 - 5/16 x 1" - 53613310
1 x H8 - 1/4 x 4-1/4" - 53703241
6.4 x 108mm
6.4 x 50.8mm
2 x WB4 - 1/4 x 2" - 53613220
4 x Z - - 5/16 x 6" - 53703360
7.9 x 152.4mm
Part Identification (Reduced Part Size)
1 x - #2 x 2
- 9200014
D4
1 x
D6
9200019
4.8mm
4 x H1 - 1/4 x 1-1/2" - 53703212
6.4 x 38.1mm