KidKraft COZY ESCAPE PLAYHOUSE F29045 User manual

# F29045
# F29045E
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
OBSTACLE FREE SAFETY ZONE - 23’ 5.5” x 20’ (715 x 610 cm) area requires Protective
Surfacing. See page 4.
MAXIMUM VERTICAL FALL HEIGHT - 56-5/16” (1.43m).
CAPACITY - 11 Users Maximum, Ages 3 to 10; Weight Limit 110 lbs. (50 kg) per child.
RESIDENTAL HOME USE ONLY. Not intended for public areas such as multi-unit
residences, schools, churches, nurseries, day cares or parks.
INSTALLATION AND OPERATING INSTRUCTIONS
ASSEMBLY TIME
6 - 8 HOURS
TWO-PERSON
ASSEMBLY
WARNING. ONLY
FOR OUTDOOR
DOMESTIC USE
COZY ESCAPE
PLAYHOUSE
Rev 06/07/2022
FOR 24/7 ONLINE PARTS REPLACEMENT
parts.kidkraft.com parts.kidkraft.eu
KidKraft, Inc.
4630 Olin Road
Dallas, Texas 75244
USA
[e-mail] [e-mail]
1.800.933.0771
972.385.0100
[phone]
M-F from 09:00 to 17:30 (GMT+1)
KidKraft Netherlands BV
Olympisch Stadion 8
1076 DE Amsterdam
The Netherlands
To reduce the risk of serious injury or death, please read and follow
these instructions. Keep and refer to instructions as needed and
pass along to any future owners of this item.
WARNING
9409045 / 9409045E
Easy step-by-step 3D interactive
instructions for this product can be
found in BILT®. Download today.
214cm 614cm
720cm
320cm
315.2cm
10’ 4”
715cm
23’ 5.5”
209.81cm
6’ 11”
610cm
20’

[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Congratulations on purchasing
a KidKraft product!
Our items are made of high-quality,
durable Cunninghamia Lanceolata wood
from the cypress family.
Lumber from these trees are known for
their light weight and excellent strength.
The porosity of this wood allows the
moisture to absorb and evaporate in the
fibers, resisting rot and bugs.
Engineered for great play, our products
also go through extensive testing for safety.
Plus, our team has developed a series of
proprietary methods for a simpler, more
organized assembly. Less build time and
more play time is our motto!
However, during assembly if you have any
questions or concerns, please reach out.
Our Customer Service can help with missing
parts, instructions or maintenance.
2

M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
parts.kidkraft.eu
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
Warnings and Safe Play Instructions
CONTINUOUS ADULT SUPERVISION REQUIRED. Most serious injuries and deaths on playground equipment have occurred
while children were unsupervised! Our products are designed to meet mandatory and voluntary safety standards. Complying
with all warnings and recommendations in these instructions will reduce the risk of serious or fatal injury to children using
this play system. Go over the warnings and safe play instructions regularly with your children and make certain that they
understand and follow them. Remember on-site adult supervision is required for children of all ages.
SERIOUS HEAD INJURY HAZARD
Installation over concrete, asphalt, dirt, grass, carpet
and other hard surface creates a risk of serious injury
or death from falls to the ground. Install and maintain
shock absorbing material under and around play-set as
recommended on page 3 of these instructions.
COLLISION HAZARD
Place play-set on level ground at least 2m from any
obstruction such as a garage or house, fences, poles,
trees, sidewalks, walls, landscape timbers, rocks,
pavement, planters, garden borders, overhanging
branches, laundry lines, and electrical wires. (See
OBSTACLE FREE SAFETY ZONE on cover)
CHOKING HAZARD/SHARP EDGES & POINTS
Adult assembly required. This product contains small
parts and parts with sharp edges and points. Keep parts
away from children until fully assembled.
WARNING LABEL
Owners shall be responsible for maintaining the legibility
of the warning labels.
STRANGULATION HAZARD
,senilsehtolc,seporhtiwyalpotnerdlihcwollaREVEN•
pet leashes, cables, chains or cord-like items when using
this play-set or to attach these items to play-set.
ponchos, hoods, scarves, capes, necklaces, items with
draw-strings, cords or ties when using this play-set.
stemlehtropsroekibraewotnerdlihcwollaREVEN•
when using this play-set.
Failure to prohibit these items, even helmets with chin
straps, increases the risk of serious injury and death to
children from entanglement and strangulation.
TIP OVER HAZARD
Choose a level location for the equipment. This can reduce
the likelihood of the play set tipping over and loose- ll
surfacing materials washing away during heavy rains.
D
Never add extra length to chain or rope. The chains or ropes
provided are the maximum length designed for the swinging
element(s).
O NOT allow children to play on the play-set until the
assembly is complete and the unit is properly anchored.
WARNING
eeS.tes-yalpruoyfosnoitatimilyticapacevresbO
front cover.
gnisolcnetoofllufdnagnittllewhtiwnerdlihcsserD
footwear.
retnecehtnithgiewllufriehthtiwtisotnerdlihchcaeT
of the swing seat to prevent erratic swing motion or
falling off.
,gnissim;doowdekcarcronekorb,deretnilpsrofkcehC
loose, or sharp edged hardware. Replace, tighten and or
sand smooth as required prior to playing.
niahc,sreddalepor,seporgnibmilcdednepsustahtyfireV
or cable are secured at both ends and cannot be looped
back on itself as to create an entanglement hazard.
rehtodnaedilsehtkcehc,syadtohrodnaynnusnO
plastic rides to assure that they are not very hot as to
cause burns. Cool hot slide and rides with water and wipe
dry prior to using.
raewtoofleehroeotneporaewotnerdlihcwollatonoD
like sandals, ip– ops or clogs.
dniheb,neewteb,tnorfni,klawotnerdlihcwollatonoD
or close to moving rides.
poolroseporrosniahcgniwstsiwtnerdlihcteltonoD
them over the top support bar. This may reduce the
strength of the chain or rope and cause premature failure.
.noitomnierayehtelihwsedirffotegnerdlihcteltonoD
.tewsitinehwtnempiuqenognibmilctimreptonoD
anitnempiuqefoesuroyalphguortimreptonoD
manner for which it was not intended. Standing on or
jumping from the roof, elevated platforms, swings,
climbers, ladders or slide can be dangerous.
.staesrosedirytpmegniwsotnerdlihcwollatonoD
rotsrdaehedilsnwodogotnerdlihcwollatonoD
run up slide.
WARNING – Safe Play Instructions
Orientate slide such that it gets the least amount of exposure
to the sun.
3

[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing
protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable
for the equipment height in accordance with ASTM F1292. There are different types of surfacing to choose from; whichever
product you select, follow these guidelines:
Loose-Fill Materials
• M
aintain a minimum depth of 9 inches (23 cm) of loose-fill materials such as wood mulch/chips, engineered wood fiber (EWF), or
shredded/recycled rubber mulch for equipment up to 8 feet (2.45 m) high; and 9 inches (23 cm) of sand or pea gravel for equipment up to 5 feet (1.5 m)
high. NOTE: An initial fill level of 12 inches (31 cm) will compress to about a 9-inch (23 cm) depth of surfacing over time. The surfacing will also
compact, displace, and settle, and should be periodically raked and refilled to maintain at least a 9-inch (23 cm) depth.
• U
se a minimum of 6 inches (16 cm) of protective surfacing for play equipment less than 4 feet (1.22 m) in height. If maintained properly, this
should be adequate. (At depths less than 6 inches (16 cm), the protective material is too easily displaced or compacted.)
NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface
can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and
environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are not adequate protective
surfacing. Ground level equipment -- such as a sandbox, activity wall, playhouse or other equipment that has no elevated play
surface-- does not need any protective surfacing.
• Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don’t forget to
account for water drainage.
• Periodically rake, check and maintain the depth of the loose-fill surfacing material. Marking the correct depth on the play
equipment support posts will help you to see when the material has settled and needs to be raked and or replenished. Be sure to
rake and evenly redistribute the surfacing in heavily used areas.
• Do not install loose fillsurfacing over hard surfaces such as concrete or asphalt.
Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles
You may be interested in using surfacing other than loose-fill materials - like rubber tiles or poured-in-placesurfaces.
• Installations of these surfaces generally require a professional and are not “do-it yourself ” projects.
• Review surfacespecifications before purchasing this type of surfacing. Ask the installer/manufacturer for a report showing that
the product has been tested to the following safety standard: ASTM F1292 Standard Specification for Impact Attenuation of Surfacing
Materials within the Use Zone of Playground Equipment. This report should show the specific height for which the surfaceis intended
to protect against serious head injury. This height should be equal to or greater than the fall height - vertical distance between a
designated play surface (elevated surface for standing, sitting, or climbing) and the protective surfacing below - of your play equipment.
• Check the protective surfacing frequently for wear.
Placement
Proper placement and maintenance of protective surfacing is essential. Refer to diagram on front cover. Be sure to;
• Extend surfacing at least 6 feet (1.8 m) from the equipment in all directions.
• For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to twice the height of the top
bar from which the swing is suspended.
• F
or tire swings, extend surfacing in a circle whose radius is equal to the height of the suspending chain or rope, plus 6 feet (1.8 m) in all directions.
Protective Surfacing-Reducing Risk of Serious Head Injury From Falls
From the CPSC Outdoor Home Playground Safety Handbook. At http://www.playgroundregs.com/resources/CPSC%20324.pdf
Denotes Use Zone with Protective Surfacing
Denotes Use Zone with Protective Surfacing
6 ft.
6 ft.
6 ft. (1.8m)
6 ft. (1.8m)
(1.8m)
6 ft.
(1.8m)
(1.8m)
6 ft.
(1.8m)
6 ft.
(1.8m)
Use Zone for Multi-Axis SwingsUse Zone for Single-Axis Swings
4

M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
parts.kidkraft.eu
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
Instructions for Proper Maintenance
sand and repaint using a non-lead paint
splinteringof wood.
Check for sharp edges or protrudingscrew threads, add
washers if required.
fill protective surfacing materials to prevent compaction and
Check for looseness, damage ordeterioration. Should firmly
if necessary.
Check that bolts are secure and tight. Quick clips should be
completely closed and threaded clips screwed tight.
parts including swingseats, ropes, chains and attachments
Check that ropes are tight, secure at both ends and cannot
loop back as to create an entrapment.
Check all wood members fordeterioration, structural
damage and splintering. Sand down splinters and replace
deteriorated wood members. As with all wood, some
checking and small cracks in grain is normal.
basis is important maintenance to maintain maximum life
and performance oftheproduct.
Check the following at the beginning of the play season:
This will causesplinteringof wood.
Check for sharp edges orprotrudingscrew threads.
Add washers ifrequired.
materials to prevent compaction and maintain appropriate
Check twice a month during play season:
Check that they are secure and orientated correctly. Hook
should rotate freely and perpendicular to support beam.
Check swingseats, all ropes, chains and attachments for
fraying, wear, excessive corrosion ordamage.
Check once a month during play season:
To prolongtheir life, remove swings and store insidewhen
plasticparts may become morebrittle.
materials to prevent compaction and maintain appropriate
Check at the end of the play season:
If you disposeof your play set:
hazards at thetime it is discarded. Besure to follow yourlocal wasteordinances.
beyond T-Nut
flat washer
Your KidKraft Play System is designed and constructed of quality materials with your child’s safety in mind. As with
all outdoor products used by children, it will weather and wear. To maximize the enjoyment, safety and life of your
Play Set, it is important that you, the owner, properly maintain it.
5

[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
About Our Wood
KidKraft Premium Play Systems uses only premium playset lumber, ensuring the safest product for your
children’s use. Although we take great care in selecting the best quality lumber available, wood is still a
product of nature and susceptible to weathering which can change the appearance of your set.
What causes weathering? Does it affect the strength of my Play System?
One of the main reasons for weathering is the effects of water (moisture); the moisture content of the wood
at the surface is different than the interior of the wood. As the climate changes, moisture moves in or out
of the wood, causing tension which can result in checking and or warping. You can expect the following
due to weathering. These changes will not affect the strength of the product:
1. Checking is surface cracks in the wood along the grain. A post 4” x 4” (101mm x 101mm) will experience
more checking than a board 1” x 4” (25mm x 101mm) because the surface and interior moisture content
will vary more widely than in
thinner wood.
2. Warping results from any distortion (twisting, cupping) from the original plane of the board and often
happens from rapid wetting and drying of the wood.
3. Fading happens as a natural change in the wood color as it is exposed to sun-light and will turn a grey
over time.
How can I reduce the amount of weathering to my Play System?
At the factory we have coated the wood with a water repellent or stain. This coating decreases the amount
of water absorption during rain or snow thus decreasing the tension in the wood. Sunlight will break down
the coating, so we recommend applying a water repellent or stain on a yearly basis (see your local stain
and paint supplier for a recommended product).
Most weathering is just the normal result of nature and will not affect safe play and enjoyment for your
child. However if you are concerned that a part has experienced a severe weathering problem please call
our consumer relations department for further assistance.
Complete and mail registration card to receive important product notifications and assure prompt
warranty service.
6

M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
parts.kidkraft.eu
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
KidKraft Limited Warranty
MISSING OR DAMAGED PARTS:
KidKraft will replace any parts within 90 days from date of purchase found to be missing from or
damaged in the original packaging. See Fig.1
Fig. 1 Product Age (All Parts) Consumer Pays
0-90 Days from date of purchase $0 for Part + Free Shipping
DEFECTS IN MATERIAL AND WORKMANSHIP:
KidKraft warrants that this product is free from defects in materials and workmanship for a period of one
(1) year from the original date of purchase (dated sales receipt and/or product registration is required).
This one (1) year warranty covers all parts including wood, hardware, and all accessories (Such as
swings, rides, and slides). See Fig. 2
Fig. 2 Product Age (All Parts) Consumer Pays
91 Days to 1 Year $0 for Part + Free Shipping
WOOD ROT, DECAY, AND INSECT DAMAGE:
All wood carries a five (5) year warranty against rot, decay, and insect damage (dated sales receipt
and/or product registration is required). Refer tothe schedule below for charges associated with
replacement of wood parts under this Limited Warranty. See Fig. 3
Fig. 3 Product Age (Wood Parts) Consumer Pays
0 Days to 1 Year $0 for Part + Free Shipping
After 1 Year to 5 Year $0 for Part + Shipping & Handling
Over 5 Years 100% for Part (if available) + Shipping & Handling
This warranty applies to the original owner and registrant and is non-transferable. Regular maintenance
is required to ensure the integrity of this product. Failure by the owner to maintain the product according
to the maintenance requirements may void this warranty.
This Limited Warranty does NOT cover:
• Any inspection cost
• Labor and/or costs for replacement of any defective item(s), including but not limited to,
professional installer costs
• Incidental or consequential damages, including but not limited to, as a result of set relocation,
move and/or reinstall
• Cosmetic defects which do not affect performance or integrity of a part or the entire product
• Vandalism, improper use or installation, or acts of nature, including but not limited to, high winds,
fire, and flood
• Minor twisting, warping, checking, or any natural occurring properties of wood that do not affect
performance or integrity.
• Any KidKraft product purchased, including but not limited to, a non-approved retailer, auction
houses, second-hand, and as-is clearance items.
KidKraft products have been designed for safety and quality. Modifications made to the original product
may damage the structural integrity of the unit leading to failure and possible injury. KidKraft cannot
assume any responsibility for the modified products. Furthermore, modifications void all warranties.
This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a KidKraft
product be used in public settings such as schools, churches, playgrounds, parks, home and
professional day cares and the like. Such use may lead to product failure and potential injury. Public use
will void this warranty. KidKraft disclaims all other representations and warranties of any kind, express or
implied.
7

[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
This identifies information that requires special
attention. Improper assembly could lead to an unsafe
or dangerous condition.
Where this is shown, 2 or 3 people
are required to safely complete the
step. To avoid injury or damage
to the assembly make sure to get
help!
Check that assembly is square
before tightening bolts.
Use a measuring tape to assure
proper location.
Check that set or assembly is properly level
before proceeding.
Pre-drill a pilot hole
before fastening screw
or lag to prevent
splitting of wood.
This indicates time to tighten bolts, but
not too tight! Do not crush the wood.
This may create splinters and cause
structural damage.
Part Identification Key
On each page, you will find the parts
and quantities required to complete the
assembly step illustrated on that page.
Here is a sample.
Key Number: The first two digits
represent the step number. The third
digit represents the piece. Note that if
the part is used in multiple steps then
the number only reflects the first step it
is used in.
Symbols
Throughout these instructions symbols are provided as important reminders for proper and safe assembly.
Proper Hardware Assembly
Lag screws require drilling pilot
holes to avoid splitting wood. Only
a flat washer is required. For ease of
installation liquid soap can be used
on all lag-type screws.
For bolts, tap T-Nut into hole with
hammer. Insert the hex bolt through
lock washer first then flat washer then
hole. Because the assemblies need to
be squared do not completely tighten
until instructed. Pay close attention to
diameter of the bolts. 5/16” (8mm) is slightly
larger than 1/4” (6.4mm).
Note: Wafer head bolts with blue lock
tight or a bolt with a Ny-Lok nut do
NOT require a lock washer.
Once the assembly is tightened, watch for exposed threads.
If a thread protrudes from the T-Nut, remove
the bolt and add washers to eliminatethis condition.
Extra washers have been provided for this purpose.
Use
Help
Use
Help
Measure
Distance
Square
Assembly
Use
Level
Pre-drill 1/8”(3mm) & 3/16”(5mm) Bit
Tighten
Bolts
CAUTION – Protrusion Hazard
Keys to Assembly Success
Tools Required
Quantity Key Number Part Description,
Part Size
2X 1012 P
No Yes
Lag Assembly
Bolt Assembly
Flat Washer
Lag Screw
Hex Bolt
Lock
Washer
Flat
Washer
Before mounting Lag
Screw, use factory drilled
holes as guides to drill 1/8”
(3.2mm) pilot holes
T-Nut
(Hammer into place)
Do not crush wood!
If Bolt protrudes
beyond T-Nut
Use an extra
flat washer
• Tape Measure
• Carpenters Level
• Carpenters Square
• Claw Hammer
• Standard or Cordless Drill
• Rubber Mallet
• #1 Phillips, #2 Robertson
and Screwdriver
• Ratchet with extension
1/2” (13mm) & 9/16”(14 mm)
sockets
• Open End Wrench
1/2” (13mm) & 9/16”(14 mm)
• Adjustable Wrench
• 1/8”(3mm) & 3/16”(5mm)
Drill Bits
• 3/16”(5mm) Hex Key
• 8’ (2.4m) Step Ladder
• Safety Glasses
• Adult Helpers
• Pencil
3mm 5mm
ost 2 x 4 x 83” (5 cm x 10 cm x 210 cm)
8

M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
parts.kidkraft.eu
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
Part Identication (Reduced Size)
1x - 9464 - 32 x 63 x 1359 mm - 3569464
1 1/4 x 2 1/2 x 53 1/2"
1x - 9465 - 30 x 38 x 1292 mm - 3569465
1 1/4 x 1 1/2 x 50 7/8"
2x - 9462 - 30 x 38 x 1357 mm - 3569462
1 1/4 x 1 1/2 x 53 7/16"
11x - 9463 - 15 x 113 x 863.5 mm - 3589463
9/16 x 4 7/16 x 34"
4x - 9460 - 30 x 38 x 1357 mm - 3569460
4x - 9461 - 25 x 38 x 805 mm - 3569461
1 x 1 1/2 x 31 11/16"
1 1/4 x 1 1/2 x 53 7/16"
1x - 9518 - 15 x 113 x 863.5 mm - 3589518
9/16 x 4 7/16 x 34"
1x - 9466 - 30 x 38 x 1424 mm - 3569466
1 1/4 x 1 1/2 x 55 7/8"
2x - 9468 - 15 x 109 x 505 mm - 3589468
9/16 x 4 5/16 x 19 7/8"
11x - 9467 - 15 x 109 x 505 mm - 3589467
9/16 x 4 5/16 x 19 7/8"
1x - 9469 - 32 x 63 x 1425 mm - 3569469
1 1/4 x 2 1/2 x 56 1/8"
2x - 9470 - 25 x 50 x 317.6 mm - 3589470
1 x 2 x 12 1/2"
4x - 9471 - 25 x 50 x 210 mm - 3589471
1 x 2 x 8 1/4"
1x - 9472 - 15 x 70 x 817.6 mm - 3589472
9/16 x 2 3/4 x 32 3/16"
1x - 9473 - 15 x 83 x 817.6 mm - 3589473
9/16 x 3 1/4 x 32 3/16"
1x - 9474 - 15 x 31.8 x 817.6 mm - 3589474 9/16 x 1 1/4 x 32 3/16"
2x - 9476 - 15 x 50 x 177 mm - 3589476
9/16 x 2 x 6 15/16"
2x - 9475 - 15 x 87.7 x 213 mm - 3589475
9/16 x 3 7/16 x 8 3/8"
Part Identification (Reduced Part Size)
9

[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Part Identication (Reduced Size)
1 1/4 x 2 7/16 x 51 5/16"
1 1/4 x 2 7/16 x 51 5/16"
13/16 x 3 1/8 x 19 1/2"
9/16 x 3 1/8 x 20 15/16"
9/16 x 3 1/8 x 20 15/16"
1 x 2 x 23 1/8"
1 1/4 x 2 7/16 x 50 11/16"
9/16 x 4 1/2 x 19 11/16"
9/16 x 4 1/2 x 19 11/16"
1 x 1 1/2 x 8 3/16"
1 x 1 1/2 x 5 13/16"
7/8 x 3 1/8 x 18 9/16"
7/8 x 3 1/8 x 18 9/16"
1 1/4 x 2 1/2 x 23 5/8"
1 x 2 1/4 x 21 3/16"
1 x 2 1/2 x 27 9/16"
1x - 9477 - 25 x 50 x 570 mm - 3569477
1 x 2 x 22 7/16"
1x - 9478 - 31 x 62 x 1304 mm - 3589478
1x - 9479 - 31 x 62 x 1304 mm - 3589479
4x - 9480 - 21 x 80 x 495 mm - 3589480
1x - 9481 - 15 x 80 x 532 mm - 3589481
1x - 9482 - 15 x 80 x 532 mm - 3569482
1x - 9483 - 25 x 50 x 588 mm - 3569483
2x - 9484 - 31 x 62 x 1288 mm - 3589484
7x - 9485 - 15 x 115 x 500 mm - 3589485
1x - 9522 - 15 x 115 x 500 mm - 3589522
2x - 9486 - 25 x 38 x 208 mm - 3589486
2x - 9487 - 25 x 38 x 147 mm - 3589487
1x - 9488 - 22 x 80 x 472 mm - 3589488
1x - 9489 - 22 x 80 x 472 mm - 3589489
1x - 9490 - 32 x 63 x 600 mm - 3569490
1x - 9491 - 31.8 x 63.5 x 538 mm - 3569491
1x - 9492 - 25 x 63.5 x 700 mm - 3569492
Part Identification (Reduced Part Size)
10

M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
parts.kidkraft.eu
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
Part Identication (Reduced Size)
1 1/4 x 3 x 19 7/16"
1 1/4 x 2 1/2 x 90"
1 x 2 x 12 7/16"
1x - 9497 - 32 x 63 x 537 mm - 3569497
1 1/4 x 2 1/2 x 21 1/8"
1x - 9498 - 32 x 63 x 566 mm - 3569498
1 1/4 x 2 1/2 x 22 5/16"
1x - 9499 - 32 x 63 x 1459 mm - 3569499
1 1/4 x 2 1/2 x 57 7/16"
2x - 9499A - 32 x 63 x 1459 mm - 3589499
1 1/4 x 2 1/2 x 57 7/16"
12x - 9500 - 15 x 63.5 x 560 mm - 3589500
9/16 x 2 1/2 x 22 1/16"
2x - 9501 - 25 x 50 x 1433 mm - 3569501
1 x 2 x 56 7/16"
2x - 9502 - 25 x 50 x 269.3 mm - 3569502
1 x 2 x 10 5/8"
2x - 9503 - 25 x 50 x 865.2 mm - 3569503
1 x 2 x 34 1/16"
1x - 9504 - 25 x 50 x 1137 mm - 3569504
1 x 2 x 44 3/4"
1x - 9519 - 25 x 50 x 1137 mm - 3569519
1 x 2 x 44 3/4"
5x - 9511 - 25 x 50 x 1372 mm - 3569511
1 x 2 x 54"
1x - 9512 - 15 x 50 x 1425 mm - 3569512
9/16 x 2 x 56 1/8"
1x - 9506 - 25 x 50 x 1372 mm - 3569506
1 x 2 x 54"
1x - 9507 - 25 x 50 x 673 mm - 3569507
1 x 2 x 26 1/2"
1x - 9508 - 25 x 50 x 673 mm - 3569508
1 x 2 x 26 1/2"
1x - 9509 - 25 x 50 x 1372 mm - 3569509
1 x 2 x 54"
1x - 9493 - 32 x 76 x 494 mm - 3569493
2x - 9494 - 31.5 x 63 x 2286 mm - 3569494
2x - 9495 - 25 x 50 x 316 mm - 3569495
Part Identification (Reduced Part Size)
11

[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Part Identication (Reduced Size)
1x - 9520 - 15 x 80 x 1425 mm - 3569520
9/16 x 3 1/8 x 56 1/8"
1x - 9513 - 22 x 63 x 125 mm - 3569513
7/8 x 2 1/2 x 4 15/16"
1x - 9514 - 32 x 88 x 618 mm - 3569514
1 1/4 x 3 7/16 x 24 5/16"
2x - 9496 - 32 x 63.5 x 538 mm - 3569496
1 1/4 x 2 1/2 x 21 3/16"
3x - 9515 - 22 x 63 x 864 mm - 3589515
2x - 9516 - 22 x 63 x 430 mm - 3589516
1x - 9521 - 31.5 x 76 x 495 mm - 3569521
1x - 9262 - 25 x 403 x 493 mm - 37589262 1x - 9261 - 32 x 375 x 1370 mm - 37569261
1 x 15 7/8 x 19 7/16 1 1/4 x 14 3/4 x 53 15/16"
7/8 x 2 1/2 x 34"
7/8 x 2 1/2 x 16 15/16"
1 1/4 x 3 x 19 7/16"
Part Identification (Reduced Part Size)
12

M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
parts.kidkraft.eu
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
Part Identication (Reduced Size)
1x - 9263 - 64 x 557 x 2286 mm
- 37569263
1x - 9264 - 64 x 557 x 2286 mm
- 37569264 1x - 9265 - 64 x 866 x 2286 mm
- 37569265
1x - 9266 - 64 x 866 x 2286 mm
- 37569266
Part Identification (Reduced Part Size)
2 1/2 x 21 15/16 x 90"
2 1/2 x 21 15/16 x 90"
2 1/2 x 34 1/8 x 90"
2 1/2 x 34 1/8 x 90"
13

[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Hardware Identication (Actual Size)
49pc. S3 - Wood Screw
#8 x 2-1/2"
- (52043522)
63.5mm
30pc. S4 - Wood Screw
#8 x 3"
- (52043530)
76.2mm
44pc. S7 - Pan Screw
#12 x 2"
- (52433620)
19pc. S6 - Pan Screw
#12 x 1"
- (52433610)
7pc. S10 - Pan Screw
#8 x 1"
- (52433510)
25.4mm
292pc. S20 - Wood Screw
#8 x 1-3/8"
- (52043516)
34.9mm
19pc. S0 - Truss Screw
#8 x 7/8"
- (52933505)
22.2mm
7pc. BN1 - 1/4" Barrel Nut
-
(54803200)
6.4mm
15pc. TN1 - 1/4" T - Nut
-
(54503200)
6.4mm
16pc. LW1 - 1/4" Lock Washer - (51303200)
25pc. FW1 - 1/4" Flat Washer - (51103200)
6.4mm
7pc. FW0 - 3/16" Flat Washer - (51103100)
11pc. PB6 - Pan Bolt
1/4 x 1"
- (53413210)
6.4 x 25.4mm
65pc. LN1 -
1/4 Lock Nut
- (54303200)
54pc. PB1 - Pan Bolt
1/4 x 3/4"
- (53453203)
6.4 x 19.1mm
7pc. PB2 - Pan Bolt
1/4 x 1-1/4"
- (53433212)
6.4 x 31.8mm
25pc. S37 - Pan Screw
#7 x 5/8"
- (52433009)
15.9mm
101pc. S11 - Wood Screw
#8 x 2"
- (52043520)
50.8mm
20pc. S38 - Pan Screw
#7 x 1-1/8"
- (52433014)
28.6mm
14pc. H3 -
Hex Bolt 1/4 x 2-1/2"
- (53703222)
6.4 x 63.5mm
1pc. H8 -
Hex Bolt 1/4 x 3-15/16"
- (53703241)
6.4 x 100mm
21pc. WL5 - Wafer Lag
1/4 x 2-1/2"
- (52613222)
6.4 x 63.5mm
8pc. WL3 - Wafer Lag
1/4 x 1-3/8"
- (52613216) 6.4 x 34.9mm
20pc. FW3 - #8 Flat Washer
- (51003500)
20pc. S5 - Pan Screw
#8 x 1/2"
- (52433502)
6.4mm 4.8mm
25.4mm
50.8mm
14

M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
parts.kidkraft.eu
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
Part Identication (Reduced Size)
1x - Cozy Escape Playhouse Rocks
(7 Pk) (3329045)
3x - Flat Panel
Brkt
(9201633)
1x - Cozy Escape Bracket Set
(3209045)
(9202111)
(3320401)
4x - Steel Hand Grip
- TNR 2 Slide Elbow
1x - TNR 2 Slide
Exit Top
1x
(9200015)
1x
Stake (6 Pk)
(3200318)
1x
Robertson Driver
(9200014)
1x (9207713)
Door Catch
2x (9207711)
Door Handle
1x Magnetic Catch
1x Catch Plate
1x - Magnetic Catch Kit (3201730)
1x
1x - TNR3 Extend
Flange Rt
1x - TNR3 Short Exit
1x - TNR 3 Tube Support
(9201601)
10x - TNR 4 Clamp Ring
10pcs number 3300130
1x - TNR4 Post Mount Kit (3201655)
1x
(9300183)
31x - Square
Nylok Nut
(54902200)
2x - TNR 4 Post
Mount Clamp
(9201657)
1x - TNR 4
Post Mount
Base
(9201656)
1x - 1/4 x
14.5mm
Pan Head
Bolt
(53452209)
30x - 1/4 x
12.7mm Pan
Head Bolt
(53453202)
1x - Factory Mount
Door Hinge (2 Pk)
(3200147)
1x - Pot Pan Spatula
(9320889)
1x - Utensils Shelf
(9320791)
1x - Deluxe Kitchen Set - (3320969)
1x - Sink Set
(3330908)
1x - Faucet (9320881)
1x - Sink Knob (9320482)
1x - Sink Knob (9320382)
1x - Sink (9330908)
1x - Stove
(3320738)
2x
- Flower Box Set
1x - Door Bumper
(9331632)
1x - Cozy Escape Triangle Canopy Set
1x - Special Weather
Caps (3322857)
(22 Pk of 9332857)
(3759045)
Cozy Escape Wave ASA Roof Panel Set
1x - 1124mmX1067mm PVC Roof Panel (9332853)
1x - 370mmX1067mm PVC Roof Panel (9332854)
1x - 1124mmX650mm PVC Roof Panel (9332855)
1x - 370mmX650mm PVC Roof Panel (9332856)
1x
1x - Kidkraft
(9320374)
8x - Mount Clips
(9320088)
10x -
#6 x 10mm Blunt
Point Pan Screw
(52402902)
- Cozy Escape Wave ASA Roof Panel Set (Dark Grey)
15

[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Step 1: Inventory Parts - Read This Before Starting Assembly
Quantity Key Number Part Size
2X 10157 2 x 4 x 83” (50mm x 100mm x 2108mm)
Inventory Parts - Read This Before Starting Assembly
A. This is the time for you to inventory all your hardware, wood and accessories, referencing
the parts identification sheets. This will assist you with your assembly.
• The wood pieces will have the key number stamped on the ends of the boards. Organize
the wood pieces by step, as per the key numbering system below.
1
B. Read the assembly manual completely, paying special attention to ANSI warnings;
notes; and safety/maintenance information on pages 1 - 8.
If there are missing or damaged pieces,
please contact the KidKraft Consumer Engagement team
before going back to the retailer.
Outdoor Swingsets and Playhouse Parts Ordering
hps://parts.kidkracom/partsorderemail
You can order replacement parts for this product 24 hours a day / 7 days a week:
If you have assembly or product questions, please refer to the front cover
for direct contact information for our Consumer Engagement team OR you
can also use this QR code with your smartphone for common questions
and contact information.
 
Order Replacement Parts 24/7
STOP STOP STOP STOP
Inventory should be completed before starting installation. KidKraft will not cover costs of any
additional installation trip due to missing or damaged pieces.
16

17
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
parts.kidkraft.eu
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
Wood Parts
Fig. 2.1
Hardware
10 x 1/4 x 2-1/2” Wafer Lag
WL5
WL5
WL5
9263
9265
Step 2: Frame Assembly
Part 1
1 x Folding Panel Assembly Right A 2 1/2 x 21 15/16 x 90”
1 x Folding Panel Assembly Left B 2 1/2 x 34 1/8 x 90”
9263
9265
A: With a helper, stand the (9263) Folding Panel Assembly Right A in the upright position and unfold, checking to
make sure the panel assembly is square. Pre-drill using a 3/16” drill bit, then install 5 (WL5) 1/4 x 2- 1/2” Wafer

B: 

18
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
Hardware
Step 2: Frame Assembly
Part 2
Fig. 2.2
WL5
WL5
9266
9264
Wood Parts
1 x Folding Panel Assembly Left A 2 1/2 x 21 15/16 x 90”
1 x Folding Panel Assembly Right 2 1/2 x 34 1/8 x 90”
9264
9266
10 x 1/4 x 2-1/2” Wafer Lag
WL5
C: With a helper, stand the (9264) Folding Panel Assembly Left A in the upright position and unfold, checking to
make sure the panel assembly is square. Pre-drill using a 3/16” drill bit, then install 5 (WL5) 1/4 x 2- 1/2” Wafer

D:

19
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
parts.kidkraft.eu
[e-mail]
[phone]
M-F from 09:00 to 17:30 (GMT+1)
2 x Side Joist 1 1/4x1 1/2x53 7/16”
Wood Parts
9462
Hardware
Fig. 3.1
Fig. 3.2
9462
9266
9266 9263
9265
9264
9265
9462
Step 3: Join Frame Assemblies
Part 1
9462
Panel
5/8” (16mm)
1/4” Flat
Washer
TightTight 1/4” Flat
Washer
x 3 per
joist
x 3 per joist
1/4”
T-Nut
1/4”
T-Nut
1/4”
T-Nut
H3
Fig. 3.3
S11
S11
S11
S11
NOTE hole orientation
Top View
H3
H3
4 x #8 x 2” Wood Screw
6 x 1/4 x 2-1/2” Hex Bolt
(1/4” at washer, 1/4” t-nut)
S11
H3
A: From inside the assembly, halfway up and tight to both end walls, place 1 (9462) Side Joist against (9265)
Folding Panel Assembly Left B and (9264) Folding Panel Assembly Left A, making sure that it’s 5/8” below the

Bolts are installed from inside the assembly. Make sure (9462) Side Joist is level then attach with 2 (S11) #8 x 2”

B: Repeat Step A to attach 1 (9462) Side Joist to (9263) Folding Panel Assembly Right A and (9266) Folding Panel
Assembly Right B. 
9263

20
[email protected]
1.800.933.0771
972.385.0100
parts.kidkraft.com
2 x Floor Joist 1 1/4 x 1 1/2 x 53 7/16”
2 x Floor Joist Short 1 x 1 1/2 x 31 11/16”
Wood Parts
9460
9461
Hardware
Fig. 3.4
Step 3: Join Frame Assemblies
Part 2
Fig. 3.7 Fig. 3.8
9461
S7
S7
9460
x 10
x 8
Fig. 3.5
Fig. 3.6
9460
9461
18 x #12 x 2” Pan Screw
S7
C: 

D: Place 1 (9461) Floor Joist Short along each end wall, between the (9460) Floor Joists. Check to make sure

3.8)
Flush
Flush
Bottom View Bottom View
Note hole orientation in Fig. 3.7,
3 screws into large panel and 2
into the small panel.