Kimberley Pull Out Pantry User manual

INSTALLATION INSTRUCTION
Pull Out Pantry
INSTALLATION INSTRUCTIONS

5
32
* 1
1
2
M8
*
40
400
45
5
14 14
Central Line
.
Front Edge
L
L
(a)
(b)
(c)
(d)
110
32
227
32
28 28
Central Line
.
1
D
D
D-1
D-1
2
3
3
D-1
push
P 1
Name Type Q'ty
A
B
C
12 pcs
2 pcs
1 pcs
Name Type Q'ty Name
Type Q'ty
D
1 pcs 4 pcs
5 pcs2 pcs
2 pcs
22 pcs
STEP 2: (1)Mark the central line on top panel and point out screw position.
(2)Disconnect inner member of slide.
(3)Screw attached plastic parts on the top slide of frame and put inner
member back to slide.
STEP 1:(1)Mark the central line on bottom panel and point out screw holes (a),(b),(c),(d) for bottom runner.
(2)Screw bottom runner on bottom panel.
1 pcs
E
F
G
H
I
J
K
1 pcs
L
4 pcs
( Bottom Panel)
(a)(b)
(c) (d)
( Top Panel)
Front Edge
5
32
*
5
8
3.5 *
3
4
INSTALLATION INSTRUCTION
Pull Out Pantry
INSTALLATION INSTRUCTIONS

Y
1
2
3
J
I
.
Y
S1
S2
112.5 112.5
P
(a)
(c) (d)
.
Y
L
L
E
E
(a)
(b)
(c)
(d)
.
F
K
.
2
.
1
To adiust the door on lateral level.
G
3
.
K
.
P 2
STEP 3:(1)Keep the frame in closing position,and connect
frame with bottom runner by two screws.
(2)pull up top frame to match the screw holes on
top panel.
(3)Fix the top frame and bottom frame.
L
( Door Panel)
Central Line
(b)
P : The thickness of carcase panel.
S1=P+84mm
S2=P+84mm+Y
Y= The distance from top screw hole center to
bottom screw hole center of frame.
I
To adiust the door on vertical level.
STEP 5: (1)Connect the door panel with frame by T-Bar.
(2)To adjust the screws on T-Bar to set up the door panel on right lateral position.
(3)To adjust the screws on bottom frame to set up the door panel on right vertical position.
STEP 4:(1)Mark the central line on door panel and point
out screw holes (a),(b),(c),(d)for T-Bar.
(2)Screw T-Bar on door panel.
(3)Connect upright tube with T-Bar and door panel.
INSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION
Pull Out Pantry
INSTALLATION INSTRUCTIONS