English - 9 -
First Time Installation
selection screen will be displayed. Select the desired
language and press OK.
press OK to continue.
0000
number combination. You have to enter this PIN if you
are asked to enter a PIN for any menu operation later.
The Signage Settings menu will be displayed next.
Set ID Auto Software Update options can be
Model name Serial
number and Software version options are for
information only. They will be grayed out and not
selectable. You can save the model information data
of the Display to a connected USB device using the
Save model information option. You can also copy
Display using the Clone from USB option. Refer to
the Signage Settings Menu Contents section for
more information on the options of this menu. After
Next and press
OK to continue.
If the ERP Regulations 2021 are applied (depends
on the model of the unit): The following step will
be available
The Display Operation Mode selection screen will be
displayed next. For normal operation set the Power
Mode option to Reactive. Set to Eco for an energy-
Network/Internet Settings
menu will be displayed. Please refer to
Networked
Standby Mode. After the
highlight Next and press OK
The First Time Installation is completed.
To repeat this process and reset the Display's settings
to the factory defaults enter the Settings>Signage
First time installation and press
OK
whether you want to delete all settings and reset the
Display. Select Yes and press OK
Note:
installation. Note that, some options may not be available
depending on the country selection.
Using Main Display Menu
When the Menu
menu will appear at the bottom of the screen. You can
navigate through the menu items using the directional
buttons on the remote. To select an item or see the
sub-menu options of the highlighted menu press OK
button. When you highlight a menu option some of
the sub-menu items of this menu may appear on the
upper side of the menu bar for quick access. To use
OK and set as
desired using the Left/Right directional buttons. When
OK or Back/Return button to exit.
Press Exit button to close the main menu.
1. Home
When main menu is opened Home menu bar will
be highlighted. The content of the Home menu can
be customised by adding options from other menus.
Just highlight an option and press the Down direction
button on the remote. If you see Add to Home option
you can add it to the Home menu. Same way you
can delete or change the position of any item in the
Home menu. Press the Down direction button and
select Delete or Move option and press OK. In order
to move a menu item use the Right and Left direction
buttons to select the position that you want the item
to move to and press OK.
2. Settings
You can manage the settings of your Display using
the options of this menu. Refer to Settings Menu
Contents section for more information.
3. Apps
When your Display is connected to the Internet related
Apps related
contents. Using the Apps menu you can access
your applications. Refer to Apps section for more
information.
4. Sources
You can manage your input source references using
the options of this menu. To change the current source
highlight one of the options and press OK.
4.1. Source Settings
Regular Enhanced and
if your Display supports Ultra HD. Regular and
Enhanced
of the HDMI source. To be able to watch 4K or HDR/
should be set as Enhanced
Set as Regular
.
You can reset your customizations on the Home
