KinCony KC868-H32w User manual

KC868-H32w Device User Manual (V0508)
Ⅰ. So tware Downloading
Ⅱ. Device Wi-Fi Con ig Operation
Ⅲ. Remote Controlling Operation
1. Mobile APP controlling manual
2. Computer Program controlling manual (WAN mode)
Ⅳ. Local Controlling Operation (LAN mode)
Ⅰ. So tware Downloading
1. Use mobile phone to scan the below QR code to download the APP
2. KC868-H32w so tware (Phone APP QR code, PC Program, Vircom Network Tool) downloading link:
www.kincony.com/download/Disk_KC868-H32W.rar
Please download the ile to have the so tware irstly, as below, it is de ault you already have and know them.
Ⅱ. Device Wi-Fi Con ig Operation (Necessary be ore any other controlling)
1. Make sure your router has the “DHCP” unction or has opened the unction
2. To setup the Wi-Fi, one computer with Wireless unction is necessary
3. Power on the device and install the antenna
4. To set the con ig o Wi-Fi as below steps:
Step 1: Use your computer to connect the wireless network o “ZLAN”
All manuals and user guides at all-guides.com

Step 2: Open the “Vircom Network Tool” and click 【 Device 】
Step 3 ： Click 【 Auto Search 】 and double click the row
All manuals and user guides at all-guides.com

Step 4: Click 【 More Advanced Settings 】
Step 5: Choose “Station” or 【 WIFI Work Mode 】 , Input your router’s name or 【 AP/STA SSID 】
And input your router’s password or 【 AP/STA SSID 】 , then click 【 OK 】
All manuals and user guides at all-guides.com

Step 6: Choose “DHCP” or 【 IP Mode 】， and “ UDP ” or 【 Work Mode 】 , keep others unchanging.
Step 7: Click 【 Modi y Setting 】 to return, and then re-power on the device, wait or approx one minute
Now the device is online, the other controlling can be operated.
All manuals and user guides at all-guides.com

Ⅲ. Remote Controlling Operation
1. Mobile APP controlling manual
1.1 According to the Wi-Fi con ig setup, it’s necessary to con ig the Wi-Fi irstly.
1.2 Register
A ter downloading and installing the APP, Register your account (11 digitals) and password,
(Pls make a note or your password in case orgotten).
1.3 Adding device
Login in, choose 【 Mine 】 - 【 My Room 】 , add loor and room(this step is necessary, please make sure this)
Floor and Room can be renamed randomly, then click 【 OK 】
Choose 【 Mine 】 - 【 Host Manager 】 ,click 【 add 】 ,scan the QR code on the device, and input a name.
Click 【 Add 】 to inish adding device
All manuals and user guides at all-guides.com

Click 【 Mine 】 - 【 My Device 】 - 【 Unclassi ied 】 ,Hold pressing the ICO to choose one room
And give a name or the device.
Hold pressing the number o the relay, the name can be renamed.
Now adding device is completed, the device can be controlled by mobile APP.
1.4 Create Scene Mode
Login in APP, Click
【 Scene 】 — 【 + 】 or 【 Add 】 --Input Mode name ， choose Mode icon ，
Time setting Optional(Function o timing), at 【 Mode setting 】 , input the actions you want to control, click 【 Save 】 ;
see below pic4-2 ， pic4-3 ， pic4-4 ， pic4-5 。
All manuals and user guides at all-guides.com

Pic4-2 Add Scene Pic4-3 Add Scene 2
Pic4-4 Time setting (Optional) Pic4-5Mode setting (Actions controlled)
“Mode name” can be named; e.g.: Back Home ， Leaving Home ， Meeting ；
“Mode icon” can be changed ；
“Time setting” is or timing (optional) ， Pic4-4 ， Repeated time: Monday, Tuesday, Wednesday and 7:10 am.
Meaning the scene mode is opened at 7:10 am each Monday, Tuesday and Wednesday.
“Mode setting” is or adding the actions required to control
1. Press ‘Click to add action’, choose KC868H8
2. Press [Enter the ctrl pg],you can set the actions, see Pic4-7
a. Open light1
b. Press the name, it will save the action
3. Press Execute ,you can set Delay time
4. Press ‘Save’
See Pic4-6, Pic4-7
， Pic4-8 。
All manuals and user guides at all-guides.com

Pic4-6 Pic4-7 Pic4-8
II. Inputting terminals trigger linkage o the scene mode
Click 【 Mine 】 ---- 【 Setting 】 -- 【 Sa e set 】 ,Hold pressing 【 input1 】 to le t,
The parameters can be modi ied.
【 Device name 】 : input one name
【 Related scene 】 click to choose one scene mode to linkage
【 Alarm message 】 Input message text sent to mobile(setting message allowed) ；
Set light1 opened success ully
1. Open light1
2. Press the name to
save the action
All manuals and user guides at all-guides.com

When inputting terminals are triggered, the phone will receive 【 Alarm message 】 ;
And the actions o the scene mode will be opened
1 、 Turn on the alarm button
2 、 Start 00-23 and Arming
(00-23 means Arming the whole day.
00—08 means Arming rom 00:00 to 08:59)
All manuals and user guides at all-guides.com

2. Computer Program controlling manual (WAN mode)
2.1 According to the Wi-Fi con ig setup, it’s necessary to con ig the Wi-Fi irstly.
2.2 The irst time to use the program, double click to install the ActiveX
Installer.
2.3 Then double click to open the program and setup the con iguration
Step 1: Choose 【 Mode 】 - 【 WAN 】
Step 2: click 【 System 】 - 【 Parameter Con ig 】
All manuals and user guides at all-guides.com

Step 3: Input Serial Number o the device at the right bottom, and then click 【 Save 】
(Serial Number is the 24 digitals on the QR code on the device)
Here, you can give new name or each relay i required.
Step 4: Now re-start the program, then choose 【 Mode 】 - 【 WAN 】 .
Now the program can control the device remotely
Ⅳ. Local Controlling Operation (LAN mode)
1.1 According to the Wi-Fi con ig setup, it’s necessary to con ig the Wi-Fi irstly.
1.2 Make sure your computer and the device are belonging to the same local internet
All manuals and user guides at all-guides.com

1.3 Open the “Vircom Network Tool” , and setup the con iguration o the device
Step 1: Click 【 Device 】
Step 2: Click 【 Auto Search 】
Step 3: Click 【 Edit Device 】
All manuals and user guides at all-guides.com

Step 4: Choose “TCP Server” or the 【 Work Mode 】， instead o “UDP”
Step 5: Make sure keeping the others unchanging, meanwhile remember the IP Address and Port
The IP and port will be required as ollowing;
You can open the tool and check back when you orget.
Step 6: Click 【 Modi y Setting 】 to inish the setup, then power o the device and power on again.
You may not close the Vircom network tool program in case you want to check the IP and Port.
1.4 The irst time to use the program, double click to install the ActiveX
Installer.
All manuals and user guides at all-guides.com

1.5 Then double click to open the program and setup the con iguration
Step 1: Choose 【 System 】 - 【 Menu Con ig 】
Step 2: Input the IP number and Port number as remembered rom the Vircom network tool.
Then click 【 Save 】 to return
Step 3: Click 【 Local Control 】 - 【 LAN Connect 】 , 【 Connect OK! 】 is showed at the bottom
Step 4: Click 【 Local Control 】 - 【 Initialization 】 , 【 Initialization completion 】 is showed at the bottom
Step 5: Now you can control the device by the program locally.
All manuals and user guides at all-guides.com