Koelstra TRAVELSLEEPER User manual

TRAVELSLEEPER
RG20505201001
Gebrauchsanleitung (DE)
Brugsanvisning (DK)
Manual de utilización (ES)
Käyttöohje (FI)
Notice d’utilisation (FR)
Instruction manual (GB)
Istruzioni per l’uso (IT)
Gebruiksaanwijzing (NL)
Brukerveiledning (NO)
Manual de utilização (PT)

TRAVELSLEEPER
PTNONLITGBFRFIESDKDE

3
TRAVELSLEEPER
PTNONLITGBFRFIESDKDE
Deutsch DE 3 - 13
Dansk DK 3 - 13
Español ES 3 - 13
Suomi FI 3 - 13
Français FR 3 - 13
English GB 3 - 13
Italiano IT 3 - 13
Nederlands NL 3 - 13
Norsk NO3 - 13
Português PT 3 - 13

4
TRAVELSLEEPER
PTNONLITGBFRFIESDKDE
Preface
Dear Customer,
Please read this instruction manual carefully and study the appendix with
the safety information and
warranty before using your travel cot. It is important that any other person using this travel cot reads and
understands both documents. Demonstrate how the travel cot works (especially how to operate the central
lock) before lending it to anyone else. If you do not follow up the instructions, maintenance suggestions
and warnings, you may be jeopardising your child's safety. Keep both documents in a safe place for future
reference. Safety instructions have the symbol, tips the symbol.
The travel cot can be used for children aged 0 to approximately 4 and has a load-bearing capacity up to a
maximum weight of 18 kg.
It is important to check the complete travel cot and all its accessories before use. If a part is missing or
damaged, please report this to your Koelstra point of sale within seven days of purchase.
We hope you enjoy using your Koelstra travel cot!
www.koelstra.com
This product has been manufactured in accordance with European standard EN 716-1 & -2:2008. This instruction
manual has been compiled with care and meets the requirements and regulations in accordance with the
Netherlands (NEN) 5509 standard.
Warning!
• Usetheproductonlyforitsintendedpurpose.Usingitforanyotherpurposeisimproperanddangerous.
Koelstra BV cannot be held liable for any damage caused or injuries sustained due to incorrect or
improper use of your product.
• ThisKoelstraproductisnotatoy,neverallowchildrentoplaywiththetravelcot.
Attention!
•A child's safety is your responsibility.
•The safety regulations and warranty conditions can be found in a separate, attached appendix. To
claim on the warranty you must be able to show the travel cot together with the serial number*, proof
of purchase and a fully completed warranty form. The sticker with the serial number can be found on the
bottom of the travel cot.
Tip!
•Save your proof of purchase in the designated place at the back of the book with the safety regulations
and warranty conditions.
* Only so-called ‘hard goods’ have a serial number. ‘Soft goods’ do not have a serial number.

5
TRAVELSLEEPER
PTNONLITGBFRFIESDKDE
Table of Contents
What's in the box? 6
Product Description 7
1 Unpacking and assembling the product 8
1.1 Before using it for the first time 8
1.2Unfoldingthetravelcot 8
1.3 Positioning the mattress 9
1.4 Zip-up crawling hatch 9
2 Moving/positioning the travel cot 9
2.1 Positioning the travel cot 9
2.2 Moving the travel cot 10
3 Transporting and storing the travel cot 10
3.1 Folding up the travel cot 10
3.2 Storing the travel cot 11
3.3 Transporting the travel cot 11
4 Maintenance 11
4.1 General 11
4.2 Cleaning the travel cot 11
4.3 Faults 12
5 Accessories 12
5.1 Care bag (Optional) 12
6 Technical specifications 13
7 Disposing of product and packaging 13

6
TRAVELSLEEPER
PTNONLITGBFRFIESDKDE
Travel cot Travel bag Instructions for use Safety regulations
Warranty conditions
What's in the box?
Gebrauchsanleitung (DE)
Brugsanvisning (DK)
Käyttöohje (FIN)
Instruction manual (GB)
Manual de utilización (ES)
Notice d’utilisation (FR)
Istruzioni per l’uso (IT )
Brukerveiledning (N)
Gebruiksaanwijzing (NL)
Manual de utilização (P)
TRAVELSLEEPER
Gebrauchsanleitung (DE)
Brugsanvisning (DK)
Käyttöohje (FIN)
Instruction manual (GB)
Manual de utilización (ES)
Notice d’utilisation (FR)
Istruzioni per l’uso (IT )
Brukerveiledning (N)
Gebruiksaanwijzing (NL)
Manual de utilização (P)

7
TRAVELSLEEPER
PTNONLITGBFRFIESDKDE
Castors/Supports
Velcro fastening (4x)
Slits for fastening the mattress (4x)
Velcro fastening bottom (2x)
Central lock
Castors/Supports
Feet
Travel bag
Frame lock
Corner piece
Press-stud
Zip
Crawling hatch
Castors
Corner protector
Central Lock
Cover flap
Feet
Product Description

8
TRAVELSLEEPER
PTNONLITGBFRFIESDKDE
1 Unpacking and assembling the
product
1.1 Before using it for the first time
Danger, risk of serious injury or death!
• Keep plastic packaging materials away from
children as they can present a choking hazard
for children.
• Bewareofsmallparts.Yourchildmayswallow
a small part and choke.
• Removeallobjectsfromthetravelcot(suchas
pillows and soft toys) which could cause
strangulation or choking hazards.
Warning!
• Beforeuse,checkyourproductforanydamage,
loose or missing parts, sharp edges and/or
protruding parts.
• Neverexceedthemaximumallowedweightfor
the travel cot (see p. 13 ‘technical specifications’).
Caution!
•To prevent damage to the travel cot, do not
remove logos or stickers. Some logos and stickers
are required by law.
Tip
•For environmental reasons we recommend that
you discard the packaging at your local civic
amenity site.
The travel cot is packed away
1. Remove the folded travel cot that is packed in
the travel bag, from the box.
2. Remove all packaging materials and discard
immediately.
3. Usetheproductdescriptiontocheckifthetravel
cot is complete (see p. 7).
1.2 Unfolding the travel cot
Warning!
•Beware of any moving parts or hinges when
unfolding, folding or adjusting the travel cot. Beware
of getting your fingers or hands, or your child's
fingers or hands jammed.
Caution!
• Toavoiddangerofngersbecomingjammedor
the travel cot suddenly folding, check that all the
locks are securely engaged each time before use.
• Checkeachtimebeforeusewhetherallthecorner
pieces and locks are covered by the cover flaps.
• Checkthatthezipsandpress-studsareproperly
closed and/or attached.
The travel cot is folded.
Untiethemattressfromthepackage:
1. Remove the travel cot from the travel bag.
2. Laydownthepackageinahorizontalposition.
3. Open the three Velcro mattress (see fig. 1).
4. Lay the mattress aside for now.
Assemblingthetravelcot:
Caution!
•When assembling the travel cot it is very
important that you first set up all the edges and
only then push the central lock towards the floor.
If you do not adhere to the sequence below,
you may (permanently) damage the product.
A. Set up the edges of the cot
1. Position the folded package in a vertical position
(see fig. 2).
2. Gently separate the four legs slightly (see fig. 3).
3. Pull one edge of the cot upwards to form a
straighthorizontalline(thesideofthetravelcot
is now taut, see fig. 4).
4. Rotate the frame lock on the edge of the travel cot
180 degrees around its axis towards the inside of
the travel cot so it can be locked (see fig. 5).
Attention: The frame lock must be rotated at an
angle of 180 degrees, otherwise the lock is not
correctly secured and the travel cot may
suddenly fold.
5. Repeat the two above steps until all four edges
of the travel cot have been secured.
6. Fold the four cover flaps over the frame locks and
attach the Velcro (see fig. 6).
7. Fold the four corner cover flaps over the corner
pieces and attach the Velcro and fasten the
press-studs (see fig. 7).
1
3
2
4 5
6 7

9
TRAVELSLEEPER
PTNONLITGBFRFIESDKDE
B. Locking the central lock
8. Push the central lock down towards the floor
until the bottom is taut.
Bottomattachments:
Check that the two Velcro attachments on the
bottom of the travel cot are attached to the relevant
hooks on the frame (see fig. 8).
1.3 Positioning the mattress
Danger, risk of serious injury or death!
• The maximum allowed thickness of the
mattress is 3 cm (centimetres).
•Never place an extra mattress on top of the
mattress supplied.
•Check that the mattress has been attached
correctly and is completely flat. A detached
mattress can present a risk of suffocation.
Warning!
• OnlyuseamattresssuppliedbyKoelstra.
The travel cot is unfolded.
1. Position the mattress so that the carry handle is
facing downwards in the travel cot (see fig. 9).
2. Push the strips of Velcro on the corners of the
bottom of the mattress through the relevant slits
in the bottom of the travel cot (see fig. 10).
3. Attach the Velcro to the bottom of the travel
cot.
4. Repeat the above steps for all four corners of the
mattress.
1.4 Zip-up crawling hatch
Warning!
• Make sure the crawling hatch is completely
closed when your child is put in the travel cot for
a rest.
• Never leave your child in the travel cot
unsupervised when the crawling hatch is partially
or completely open.
Attention!
• Thezipfasteningisontheoutsideofthetravel
cot to prevent your child from opening the
crawling hatch.
• The crawling hatch is not for babies, only for
bigger children.
Only open the crawling hatch when you are there
to supervise. Your child can then crawl out of the
travel cot by itself (see fig. 11).
2 Moving/positioning the travel cot
2.1 Positioning the travel cot
Danger, risk of serious injury or death!
•Never place the travel cot near heaters, open
fire or other sources of heat as this could pose
a fire hazard.
•Keep the travel cot away from loose leads,
wires and cables in case of falling objects,
strangulation or choking hazards.
Warning!
• Neverputmorethanonechildinthetravelcot,
the maximum load is 18 kg.
• Makesureyourchildcannotclimbovertheedge
of the travel cot. This can cause the travel cot to
become unstable and it may tip over, causing
your child to become (seriously) hurt.
• Remove all objects around the travel cot that
may be within your child's reach and that may
cause a dangerous situation (such as white spirit
or matches).
• Remove all objects around the travel cot that
your child might use to pull itself up from.
• Removerallobjectsfromthetravelcotthatmay
help your child to climb out of bed.
• Aluminium, metal and synthetic parts can
become very hot in the sun. Make sure your child
cannot burn itself on any hot parts.
Caution!
•Never place the travel cot in the sun for
prolonged periods of time. The fabric can
discolour and plastic parts can be damaged.
Koelstra fabrics are of the highest UV protection
category.
10
8
9
11

10
TRAVELSLEEPER
PTNONLITGBFRFIESDKDE
Attention!
• Do not attach any toys to the travel cot with a
cord.
Place the travel cot on a level, stable floor.
2.2 Moving the travel cot
Warning!
• Usethecorrectposturewhenmovingthetravel
cot. Keep your back straight and slightly bend
your knees.
• Neverliftormovethetravelcotwithyourchild
standing, sitting or lying in it.
1. Take hold of the travel cot by the short edge of
the bed on the side of the feet.
2. Lift up this side of the travel cot until you feel
that the wheels can touch the floor and move
freely (see fig. 12).
3. Hold the travel cot in this position and roll it to
the desired location.
3 Transporting and storing the
travel cot
Warning!
•Usethecorrectposturewhentransportingthe
travel cot. Keep your back straight and slightly
bend your knees.
Caution!
•Transport the travel cot carefully. The frame and
the fabric can be damaged if you bump or scrape
it.
3.1 Folding up the travel cot
Attention!
•Always store folded products away from
children.
The travel cot is unfolded.
1. Remove all the cover flaps from the frame locks.
2. Remove all the corner cover flaps from the corner
pieces.
Attention: To avoid the corner cover flaps from
jamming when folding the travel cot, completely
pull away the Velcro.
Unlockingthecentrallock:
1. UndotheVelcrofasteningsofthemattressfrom
the bottom of the travel cot.
2. Remove the mattress from the travel cot and lay
it down on a flat surface (see fig. 13).
3. Rotate the central lock a quarter of a turn in the
direction of the arrow to unlock it, and pull it in
an upward motion (see fig. 14).
4. Keep the central lock in this position.
Caution: When folding up the travel cot it is very
important that you first turn the central lock a
quarter of a turn to the right, pull it upwards and
hold it there and then fold the travel cot. If you
do not adhere to the sequence below, you may
(permanently) damage the product.
Foldingupthetravelcot:
1. Rotate all the frame locks 180 degrees around
their axis towards the outside of the travel cot.
2. Push all corner pieces as tightly as possible
against the central lock you are holding up, thus
creating a small package.
3. Putthepackagehorizontallyonthemattressas
shown in figure 15.
Tip: Make sure the mattress is positioned as far as
possible towards the top of the travel cot. The
wheels must remain clearly visible.
4. Fold the mattress around the travel cot (see fig.
15).
5. Attach the three Velcro fastenings tightly onto
the mattress.
12
13
14
15

11
TRAVELSLEEPER
PTNONLITGBFRFIESDKDE
3.2 Storing the travel cot
Caution!
•To avoid any damage, do not place any objects on
or against the folded product.
Tip
•When folded, the travel cot can be stored in a
vertical position. This will save space.
The travel cot is folded.
1. Laythepackageontheoorhorizontally.
Tip:Checkthatthehandleonthemattressison
the side where the feet of the folded travel cot
are located (see fig. 17)..
2. Pull the bottom of the travel bag over the
undercarriage of the travel cot.
Tip: The wheels will fit through the largest holes,
the feet through the smaller holes (see fig. 16).
3. Position the package vertically.
4. Pull the travel bag up around the package and
zipitup.
5. Pull the handle through the hole in the travel
bag, specially made for that purpose.
3.3 Transporting the travel cot
Caution!
•The travel cot must always be transported in the
travel bag. This is to protect the travel cot.
The travel cot can be transported in two ways.
Bycarryingthetravelcot:
Lift up the package by the handle attached to the
mattress (see fig. 17).
Rollingthetravelcot:
1. Position the package upright with the handle on
the travel bag and the wheels positioned towards
you.
2. Just pull the package along behind you
(see fig. 18).
4 Maintenance
4.1 General
Attention!
•Only use Teflon spray or silicon spray for
lubricating the moving parts. Never use oil,
grease or other lubricants as these attract dirt
and dust.
Tip
•If your product has been involved in an accident,
please pay a visit to your Koelstra dealer to have
the it checked for any technical faults.
• Lubricate the moving parts regularly. This will
prolong the life of your travel cot.
• Regularlycheckthatallthepartsofyourtravel
cot are functioning properly.
4.2 Cleaning the travel cot
Caution!
• Donotbleachordrycleanthefabric.
• Cleanthetravelcotimmediatelyafterithasbeen
used in a sandy and/or salty environment (for
example at the seaside). Sand can damage
moving parts and/or the locking devices. Salt will
cause metal parts to rust.
• Ifwet,drytheunfoldedfabricinadarkroomto
prevent it from discolouring.
Tip
•Stains can be removed using a mild detergent or
soap stick.
General:
• Useadampclothtocleanstainsonthefabric.
• Dry the travel cot with a soft cloth after
cleaning.
16
17
18

12
TRAVELSLEEPER
PTNONLITGBFRFIESDKDE
4.3 Faults
Warning!
• To avoid dangerous situations and further
damage, never use a faulty travel cot.
• Immediately replace faulty parts. Always have
this done by an authorised Koelstra dealer.
• Donotusethetravelcotiftheliningmaterialis
showing through the fabric.
Attention!
•Do not make any modifications to the product
yourself. This is unsafe and invalidates your
warranty.
• ReportanyfaultstoyourKoelstradealer.
• Ifanypartsstarttoshowsignsofwearorbecome
faulty, always have them replaced by an
authorised Koelstra dealer.
5 Accessories
Attention!
•Only use accessories and/or parts that have been
recommended and approved by Koelstra BV.
Visit our website www.koelstra.com for a complete
overview of the various accessories and other
Koelstra products.
5.1 Care bag (Optional)
Specications:
• Carebagwithadjustablecarrystrap.
• Plenty of storage with seven zippable com-
partments, including a thermal compartment.
• Suppliedwithchangingmat.
• The carry strap also has a name badge and a
handy hook.

13
TRAVELSLEEPER
PTNONLITGBFRFIESDKDE
6 Technical specifications
This product has been manufactured in accordance
withEuropeanEN716-1&-2:2008standard.
7 Disposing of product and packaging
Koelstra BV develops its products in accordance
with the directives of the European packaging
agreement. For environmental reasons we
recommend that you discard both the packaging
and the product (at the end of its product life) at
your local civic amenity site.
This instruction manual has been compiled with care and meets
the requirements and regulations in accordance with the
Netherlands (NEN) 5509 standard. However, Koelstra BV cannot
be held responsible for any inaccuracies or for the completeness
of the information and does not accept any responsibility for
damages and/or injury of any kind, as a result of actions and/or
decisions that have been based on the information in this
manual.
The product purchased may differ from the product as
described in the manual.
The most recent manuals can be requested from Koelstra BV.
See also www.koelstra.com.
© Copyright 2010 Koelstra BV
Intended age 0 to approximately 4
Max. load 18 kg
Max. number of children 1
Weight 9.8 kg
Dimensions(lxwxh):
- Folded
-Unfolded
22 cm x 22 cm x 75 cm
120 cm x 60 cm x 75 cm
Recommended cleaning agents for fabric Mild detergent, soap stick
Recommended lubricants Silicon spray, Teflon spray

Table of contents
Other Koelstra Baby & Toddler Furniture manuals