Kinder Valley Chester Rocking Stand User manual

Chester Rocking Stand
IMPORTANT- Read these instructions carefully
before use and keep for future reference.
• Dimensions (mm): (L)720-830 x (W)610 x (H)440*
• Min/Max Moses basket base size (mm): (L)670-825 x (W)300-360*
• Colour: Natural • Easy assembly • Safe & Sturdy
• Suitable to use from birth • Rocking motion to soothe baby
ASSEMBLY INSTRUCTIONS
Need Help?
Call 0844 7744 644
or Email [e-mail]
*Approx. measurements only. Sizes may vary.
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Step 5
E
E
H
H
H
H
B
B
B
B
Finally, attach plastic rail to legs using the 2 x 15mm screws .
E H
Repeat this step with the remaining plastic rail . The plastic rails have
3 x holes one end and 2 x holes the other to allow for adjustment depending
on the size of your moses basket.
E
E
E

Chester Rocking Stand
Assembly Instructions
BEFORE YOU START
IMPORTANT - RETAIN FOR FUTURE REFERENCE -
READ CAREFULLY
Instructions for safe use:
WARNING - Do NOT attach anything to the stand that may affect its stability.
WARNING - Remove all packaging materials before use.
WARNING - Store in a cool, dry place away from children when not in use.
WARNING - Do NOT let other children play unattended near the moses
basket and stand.
WARNING - Use only on firm ground which is horizontal, level and dry.
WARNING - Do NOT use if any part is broken, torn or missing.
WARNING - Only use replacement parts supplied by or approved by
Kinder Valley
WARNING - Your product can be cleaned with a damp cloth. Never use
harsh abrasives, bleach or strong detergents.
FIXTURES & FITTINGS
CHECK THAT YOU HAVE ALL FIXTURES AND FITTINGS BEFORE
ASSEMBLY, AND ENSURE THEY ARE NOT BROKEN.
A x2 Curved Base Rail
B x4 Legs
x2 Left & x2 Right
C x2 Support Bars
D x2 Crossrails
E x2 Plastic Rails
F x8 70mm Screws
G x8 30mm Screws
H x4 15mm Screws
Number of people to assemble:
One Adult is required to assemble this item.
Time to assemble:
20 minutes.
Tools required:
Cross-head screwdriver.
Repeat this step with the remaining
curved base rail and legs .
C
B
B
G
G
B
B
Step 1 Step 2
Step 3
A
D
F
G
G
B
B
D
G
G
D
D
Step 4
B
B
B
B
Fasten 2 legs to support bar
using 2 x 30mm screws . Large
holes should be facing the same way.
B C
G
Fasten curved base rail to legs
using 4 x 70mm screws .
A B
F
B C
Repeat this step with the remaining
2 legs and support bar .
Attach 2 x Cross Rails to legs using
2 x 30mm screws .
D
G
Attach the remaining legs and
curved base rail to the main
structure using the remaining
2 x 30mm screws .
G
F
B
A
IMPORTANT - RETAIN FOR FUTURE REFERENCE
A B
When using the base with the stoppers
attached, make sure these are on the
inside.