Kinetico Drinking Water System Plus Deluxe User manual

Owner’s Manual • Guide d’utilisation • Manual del usuario
Kinetico Drinking Water System Plus Deluxe
Système Kinetico Plus Deluxe pour eau de boisson
Sistema de Lujo de Tratamiento de Agua Kinetico

Kinetico Drinking Water
System Plus Deluxe
Owner’s Manual
Congratulations for choosing Kinetico to improve the quality of your water.
You will immediately begin to notice the numerous benefits of having
quality water in your home and the benefits of having a Kinetico water
treatment system.
Since 1970, Kinetico Incorporated has designed and manufactured products to
improve the quality of your water. Kinetico offers a complete line of quality
water systems to solve your water problems. Pioneers in non-electric,demand
operated water treatment, Kinetico continually sets the direction for the
entire water quality industry.
“Kinetico,” the Kinetico Logo and the “Girl Drinking Water” are registered trademarks of
Kinetico Incorporated, Newbury, Ohio. MADE IN U.S.A.

Table of Contents
Using The Kinetico Drinking Water System Plus Deluxe ............................ 4
How Your Drinking Water System Works .................................................... 6
What Makes Your Drinking Water System Different
Is What Makes It Better ...................................................................... 8
System Accessories .................................................................................... 9
Maintaining Your Drinking Water System .................................................. 10
Filter Changes
Shutting Off the System
Booster Pumps
Cartridge Changes & Sanitization ................................................................ 12
Replacement Filter Cartridges .................................................................... 17
System Specifications.................................................................................. 18
Version Francaise ........................................................................................ F1
Version Español .......................................................................................... E1
Kinetico Incorporated
10845 Kinsman Rd
Newbury, Ohio, 44065
USA
www.kinetico.com
Kinetico UK Limited
Bridge House
Park Gate Business Centre
Park Gate Hampshire SO31
1FQ
England
www.kinetico.co.uk
Kinetico Canada
Incorporated
16524 Hurontario St.
Caledon, Ontario L0N 1C0
Canada
www.kinetico.com
Kinetico France Sarl
B.P.54
Parc d’Activités de la demi-Lune
2, rue Gutenberg
95420 Magny en Vexin
France
www.kinetico.fr
Kinetico Denmark
ApS
Tigervej 12-14
Køge, DK-4600
Denmark

2
1
Using the Kinetico Drinking Water System
Plus Deluxe
Water is the most important liquid in the world. And although the water you
use for drinking and cooking constitutes less than one
percent of all water used in the home, its quality is
probably most important to you.
Experts suggest you drink approximately eight,
eight-ounce glasses of water per day. Now that
you have a Kinetico Drinking Water System, you
can rest assured you’re drinking clean, high quality
water. And it will taste great too. With a Kinetico
Drinking Water System, drinking those eight glasses
of water will be a pleasure, not a chore.
How To Use High Quality Drinking Water
Since Kinetico Drinking Water Systems significantly reduce heavy metals (such
as lead), chemicals, minerals, and unpleasant tastes and odors in your water*,
you may want to make some adjustments when using Kinetico Drinking
Water for cooking.
*The contaminants listed are not necessarily in your water
Let your taste buds decide how much water to use.
When mixing concentrated juices and drinks or making gelatin, tea or coffee,you
may need to adjust the amount of water used.You may find that you can use
less coffee or tea and still get the desired taste. Or in the case of concentrated
drinks, you can add more water without getting a watered-down taste. Also, it
probably won’t be necessary for you to descale your automatic coffee maker
with vinegar as recommended.
Kinetico Drinking Water is ideal for cooking and baking.
Don’t forget to use water from your Kinetico
Drinking Water System for cooking pasta, and
washing fruits and vegetables. Whenever a
recipe calls for water, reach for your special
drinking water tap.
4
The Kinetico Drinking Water System Plus Deluxe

4
3
5
Use Kinetico Drinking Water in irons and small humidifiers/vaporizers.
For extended operation and easier maintenance, use Kinetico Drinking Water
in irons and small humidifiers.You’ll no longer have to buy distilled water or
suffer the consequences of using common tap water in irons and humidifiers.
Since water produced by your system has a reduced mineral content, it’s ideal
for use in these appliances and it’s available right at your
kitchen sink.
Make ice cubes with Kinetico Drinking Water.
If your refrigerator/freezer is equipped with an
ice maker, you may want to consider running
a line from your system to the ice maker. If
you don’t have an ice maker, be sure to fill
your ice cube trays with Kinetico Drinking
Water. Either way, you’ll be able to enjoy better
tasting and clearer ice cubes.
Houseplants and pets like Kinetico Drinking Water too.
Don’t forget about your plants and pets. Just like you, they’ll love Kinetico
Drinking Water.
5

How Your Drinking Water System Works
Kinetico Drinking Water Systems Plus DeluxeVX and GX models offer exclusive
five-stage protection to ensure you’re always getting good, clean water. They
significantly reduce the heavy metals, chemicals, minerals, and objectionable
tastes and odors that may be in your water.
(A) The first filtration stage, the prefilter (part numbers: sediment 9309A, high
capacity carbon/sediment 9461A), prepares the water for the reverse osmo-
sis process. The five–micron filter captures sediment and small particulate
matter, and reduces chlorine (high capacity carbon/sediment only) protect-
ing the reverse osmosis membrane and enhancing its performance.
(B) After prefiltration, the water travels to the reverse osmosis module where the
primary cleaning is done. Here, water is forced through a semipermeable
membrane under pressure and most minerals, chemicals or objectionable
matter that might have been in your water are then flushed to drain.
(C) After the water is processed, it is stored in a tank until needed. Unlike any
other storage tank on the market, a QuickFlo®storage tank uses your
home’s water pressure to deliver Kinetico Water from your storage tank to
your special drinking water tap. Since the storage tank uses your home’s
water pressure rather than a pressurized air charge, you’ll have a steady,
consistent flow of water from your tap, even if your storage tank is almost
empty. For more information on the proper operation of your QuickFlo
Storage Tank, consult the QuickFlo Drinking Water Storage Tank owner’s
manual. Due to the specifics of your application, your system may not
include the QuickFlo tank. In cases where QuickFlo cannot be installed,
Kinetico dealers provide an alternate storage tank.
(D) After leaving the storage tank, the water travels to the next stage of protection,
the MACguard Filter®. (Plus Deluxe GX models: part number 9306B,
Plus Deluxe VX models: part number 9307A) Containing activated carbon,
the MACguard Filter gives a final polish to your water, reducing unpleasant
tastes and odors, as well as additional organic contaminants (VX models only).
(E) The final protection stage is a custom decorator lead–free tap, which is
mounted on your sink. With this tap, you can be sure that lead won’t be
added back into your drinking water.
6
The Kinetico Drinking Water System Plus Deluxe

7
ADB
C
E
(System configurations vary, and yours may not appear exactly as above.)

What Makes Your Drinking Water System
Different is What Makes It Better
Like other Kinetico equipment, Kinetico DrinkingWater Systems are non–electric
and demand operated.With demand operation, Kinetico systems produce high
quality drinking water, while they maximize water efficiency and performance.
EverClean Rinse®
After shutdown, the system initiates the EverClean Rinse feature, which is
patented and exclusive to Kinetico.The membrane’s surface is automatically
cleansed with and left to bathe in clean,processed water.This extends the use-
ful life of the membrane, enables it to maintain a high level of performance
and prevents inorganic contaminants from migrating into the treated water
during shutoff.
MACguard Filter®
One of the system’s most unique features is the automatic shutoff of the
MACguard Filter.(“MAC”stands for Metered Automatic Cartridge.) After 500
gallons (1895 litres) of water have
been processed through the
MACguard Filter, it shuts off (no
flow or fine stream) to alert you that
the filter is exhausted. The filter
cannot be reset, and no more water
can be drawn from the system.This
signals the need to change the pre-
filter and postfilter cartridges, but
more importantly, it prevents you
from using the cartridges beyond
their capacity. If overused, cartridges
lose their filtration ability.
PureMometer®Filter Life Indicator
Your system is equipped with the PureMometer (rhymes with thermometer)
Filter Life Indicator so you can tell how much capacity remains in your filter
cartridges. Use the PureMometer to estimate when to purchase replacement
prefilter and postfilter cartridges so you won’t be surprised when the failsafe
MACguard Filter shuts down the system.
8
The Kinetico Drinking Water System Plus Deluxe
Feed
water in
Processed
water out
Contaminants are
flushed to drain
Reverse
osmosis
membrane

System Accessories
Your system may also include the following upgrades, which are available from
your local Kinetico dealer.
Decorator Finish, Lead–Free Taps
Choose from highly stylish decorator taps to complement your decor. Available
in Classic Chrome (standard), Brilliant Nickel, Satin Nickel/Stainless, Antique
Bronze/Copper, Polished Brass, Light Biscuit,ArcticWhite and Black Licorice.
Performance Monitor
Kinetico’s Performance Monitor measures the level of
TDS (total dissolved solids) in your product water
every time you draw a glass. A green light indi-
cates your system is rejecting the proper amount
of dissolved solids. A yellow light indicates it is
not and you should contact your local, author-
ized Kinetico dealer. If the monitor does not
light when you draw water, you may need to
replace the batteries in the control module
mounted under your sink.
Oversized Storage Tank
A larger storage tank supplies more water on demand for larger families.There’s
no need to do anything special to your system. Simply enjoy your clean, clear
Kinetico Water.
9

Maintaining Your Drinking Water System
The Kinetico Drinking Water System Plus Deluxe is engineered to take the
guesswork out of quality water. It will tell you when routine maintenance
needs to be performed to keep your drinking water system working properly.
Filter Changes
If you open your tap and don’t get any water, or only get a small stream, it could
mean one of two things: your storage tank is out of water and the drinking
water system is making more, or your MACguard Filter has shut off. Check
your system’s PureMometer to see if the MACguard Filter has shut off.
Periodically checking the PureMometer could alert you of upcoming filter
shutdown before it happens. If the MACguard Filter has not shut off, wait an
hour or two and try to draw water from the faucet again.
How long a MACguard Filter cartridge will last depends on your drinking
water usage. It could last anywhere from a few months to a few years. An
average family of four with average drinking water use can expect the car-
tridge to last approximately nine months to one year. Kinetico recommends
annual cartridge replacements even if your system has not shut off.
When your MACguard Filter does shut off, we recommend you call your local,
authorized Kinetico dealer.They will change your cartridges, completely san-
itize your system, check your water and make sure your system is operating
properly. If you choose to install your new cartridges yourself, follow the
instructions carefully. Never attempt to remove the prefilter or postfilter car-
tridges without first depressurizing the system. Be sure to completely sanitize
your system by following the instructions provided in the “Sanitization
Procedure” section of this owner’s manual to prevent contamination from
human contact.
Shutting Off the System
If you should ever discover a problem with your drinking water system, turn
off the water supply to the system.Then call your local, authorized Kinetico
dealer for service.
NOTE:The Kinetico Drinking Water System Plus Deluxe’s operational, maintenance
and replacement instructions must be followed to ensure proper system performance.
The reverse osmosis system contains a replaceable component critical to the efficiency
of the system.Any replacement reverse osmosis component must be identical to the one
listed here to assure the same efficiency and contaminant reduction performance.
Recommended hardness is zero to 10 gpg for extended product life. Do not use where
10
The Kinetico Drinking Water System Plus Deluxe

water is microbiologically unsafe or with water of unknown quality. Systems claiming
cyst reduction may be used on disinfected water containing filterable cysts. If you plan
to be away from home for more than a few days, shut off the water supply to your
system to extend its life.You may also want to drain the drinking water storage tank
upon your return to ensure the freshest water.
Booster Pumps
Some households require booster pumps to ensure that adequate feed pressure
is being supplied to the system. Unplug or turn off the power supply to any
pumps before attempting to service your system.
Nitrate/Nitrite Kit
If you purchased your system specifically for nitrate reduction, Kinetico recom-
mends periodic (quarterly) testing with a nitrate/nitrite test kit (part no. 7329)
to assure that nitrate/nitrites are being reduced to acceptable levels.
11

Cartridge Changes and Sanitization
If you choose to change the cartridges on your Kinetico Drinking Water
System Plus Deluxe yourself, you must use a sanitization kit available from
your Kinetico dealer. Follow these instructions to fully sanitize your system.
Wash your hands thoroughly and do not touch any internal portions of the
system. Or call your local, authorized Kinetico dealer who can change the
necessary filters, disinfect your system and analyze your water to be sure it is
of the best quality.
NOTE: Although great care is taken to provide a sanitized drinking water unit, possi-
ble contamination can result from vendor products, assembly, packaging, shipping or
extended storage time. Proper sanitization is required.
WARNING: To avoid possible injury and property damage, this system must
be properly depressurized before attempting to remove any cartridge or other
component.
NOTE: Be prepared to catch any water when disconnecting and sanitizing your system.
1) Remove the decorative cover (Fig. 1). Close the cold water supply valve and
the storage tank shutoff valve. Open the tap (Fig. 2) to help depressurize the
system.Wait until all the flow stops at the open tap before continuing (this
may take several minutes). Remove the exhausted MACguard Filter car-
tridge and the prefilter cartridge (Fig. 3) and discard them. Be prepared to
catch accidental water spills when removing the cartridges.
NOTE: If your system was installed with an air-charged storage tank (not a QuickFlo
tank), please proceed to step 14, page 15.
Sanitization Procedure When Using QuickFlo Storage Tank
2) Fill the sanitizer cartridges 3/4 full with clean water. Add 1 dropper (5 ml)
of regular, unscented household bleach (6% sodium hypochlorite) to the
center of each cartridge (Fig. 4). Install the sanitizer cartridges to the prefilter
and postfilter heads.
3) Remove the module securing clip from the bracket manifold by squeezing
the sides inward and pulling the clip off (Fig. 5). Remove the RO module
from the center of the bracket manifold (Fig. 6). Install the sanitizer assem-
bly to the center of the bracket manifold (Fig. 7). Fasten the module clip to
the bracket manifold to secure the sanitizer assembly (Fig. 8).The clip must
snap into place on both sides (Fig.9).
12
The Kinetico Drinking Water System Plus Deluxe

4) Be sure the storage tank shutoff valve and the drinking water tap are open.
Disconnect the drain line from port # 3 on the RO manifold and secure the
end of the tubing in a bucket or pan.
5) Slowly open the cold water supply valve until there is a constant flow from
the open drinking water tap. (Be prepared for some air to be discharged from
the open tap.) Close the cold water supply valve. When all the flow stops
from the drinking water tap, close the drinking water tap.
6) Remove the prefilter sanitizer cartridge.Again add 5 ml of unscented house-
hold bleach (6% sodium hypochlorite) to the center of the cartridge.
Reinstall the prefilter sanitizer cartridge.
13
CLICK CLICK
12
4
3
5 6
7 8 9

7) Slowly open the cold water supply valve and allow the QuickFlo tank to fill
for several minutes. (During this time some air may occasionally discharge
from the tubing.) Be prepared for up to 1 tank of water to be discarded from
the tubing that was secured into the bucket or pan in step 4.When the flow
stops from this tubing, shut off the cold water supply.
8) Open the drinking water tap to depressurize the system.After several seconds
to one minute, the flow should stop from the drinking water tap. Close the
drinking water tap and the storage tank valve. Remove the sanitizer cartridges
and discard the water that they contain. Be prepared to catch accidental spills
from these cartridges. Place the protective caps back on the sanitizer car-
tridges and save them for future use.
9) Reconnect the drain line that was disconnected in step 4 to port # 3 on the
RO bracket manifold. If the tubing end is scarred or scratched, cut away the
damaged end before connecting it to the tank.All the tubing should now be
properly installed.
10) Install the prefilter cartridge into the prefilter head on the left-hand side of
the bracket manifold. Install the MACguard postfilter cartridge into the
postfilter head on the right-hand side of the bracket manifold. Be sure the
PureMometer is in the startup position (blue indicator fully visible).
IMPORTANT: DO NOT drink the water from the system during this
procedure.
11) Remove the securing clip from the bracket manifold by squeezing the
locking tabs inward and pulling the clip off. Remove the module sanitizer
assembly. (Be prepared to catch residual water from the manifold.) Slide the
RO module into the center of the manifold bracket assembly. Secure the
module to the manifold with the clip. Be sure the clip “snaps” into position
on both sides.
12) Open the RO tap. Open the cold water supply valve.
13) Open the shutoff valve on the tank.The tank should now be discharging
water through the open drinking water tap. This will flush away carbon
fines from the MACguard Filter.When the flow slows to a steady drip, leave
the RO tap open for 10 to15 minutes to purge any remaining air out of the
system. Close the RO tap and allow the system to fill the RO storage tank
for a few hours.Discard the water in the tank after this time.When the tank
refills, the system is ready to use.
14
The Kinetico Drinking Water System Plus Deluxe

Sanitization Procedure When Using Standard Storage Tank
14) Install an empty sanitizer cartridge into the postfilter head. Leaving the cold
water supply valve off (closed), open the storage tank shutoff valve and
allow the remaining water in the tank to discharge through the open tap.
When the flow stops, close the tap.
15) Close the shutoff valve on the empty storage tank. Remove the sanitizer
cartridge from the postfilter head and discard the water in it. Fill both
sanitizer cartridges 3/4 full with clean water. Add 1 teaspoon (5 ml) of
regular, unscented household bleach (6% sodium hypochlorite) to the
center of each cartridge using the 5ml dropper provided in the sanitizer
kit (Fig. 10) to chlorinate the water. Install the sanitizer cartridges into the
prefilter and postfilter heads.
16) Remove the module clip from the bracket manifold by squeezing the sides
inward and pulling the clip off (Fig. 11). Remove the RO module from the
center of the bracket manifold (Fig. 12). Install the sanitizer assembly to the
center of the bracket manifold (Fig. 13). Fasten the module clip to the
bracket manifold to secure the sanitizer assembly (Fig. 14).The clip must
snap into place on both sides (Fig. 15).
15
CLICK CLICK
11 12
13 14 15
10

17) Open the storage tank shutoff valve. Be sure the drinking water tap is
closed. Slowly open the cold water supply valve and allow chlorinated
water to fill the storage tank for approximately four to five minutes.
18) Close the cold water supply valve and the storage tank shutoff valve. Open
the tap for approximately 15 seconds to depressurize the system. Close the
tap. Remove the RO sanitizer assembly. Remove the sanitizer cartridge from
the prefilter head. *Be prepared to catch accidental water spills from this
procedure.
19) Install the RO module. Be sure the module securing clip snaps into place
on both sides. Mix 1/3 cup clean water with one level teaspoon of Iron
Out or sodium meta bisulfite. Discard enough water from the prefilter san-
itizer cartridge to allow the solution to be added to the center of the car-
tridge. A small plastic, household funnel or the dropper provided in
Kinetico’s sanitization kit may aid in adding solution to the cartridge.After
adding solution to the cartridge, install the cartridge into the prefilter head.
20 Disconnect the tubing from the storage tank shutoff valve (Fig. 16) and put
the tubing end into a bucket or pan. Open the cold water supply valve and
allow the product water to discharge from the tubing into the bucket or pan
for 15 to 20 minutes. Close the cold water supply valve and reconnect the
tubing to the storage tank shutoff valve. If the tubing end is scarred or
scratched, cut away the damaged end before connecting it to the tank.
21) Open the drinking water tap. Remove the sanitizer cartridges and install the
new prefilter and MACguard postfilter cartridges. Be sure to install the new
cartridges in the proper places. Check the decal mounted on the underside
of your system’s decorative cover for more information. See the cartridge
replacement instructions included with each cartridge for proper installa-
tion. Open the cold water supply valve and the shutoff valve on the storage
tank.The tank should now be discharging water through the open drinking
water tap.This will flush any carbon fines from the
new MACguard Filter.When the flow slows to a
drip, close the tap.Allow the system to fill the stor-
age tank for a few hours. Discard the water in the
tank after this time by opening the tap until the
flow slows to a drip. The system is now ready to
produce more great tasting drinking water.
16
The Kinetico Drinking Water System Plus Deluxe
16

Replacement Filter Cartridges
To ensure optimum performance, continued warranty coverage and that your
system continues to comply with NSF and WQA certification standards, you
must replace the prefilter and postfilter cartridges annually or upon system
shutoff, whichever occurs first. Use the following chart to determine which
filters are appropriate for your system.
17
Chlorinated Water Supply
(City Water or
Chlorinated Well)
Non-Chlorinated
Water Supply
(Non-Chlorinated Well)
Prefilter
(A)
High Capacity Carbon/
Sediment
(Part No. 9461A)
Sediment
(Part No. 9309A)
MACguard
Postfilter
(B)
Drinking Water System Plus Deluxe GX
Taste and Odor Postfilter
(Part No. 9306B)
Drinking Water System Plus Deluxe VX
Taste, Odor, MTBE and VOC Postfilter
(Part No. 9307A)
AB

System Specifications
TDS maximum level: 3000 ppm
pH Range: 3–11
Pressure Ranges: 35–100 psi/241.3–689.5 KPa, 40–100 psi for nitrate reduction
Water Supply: 0–10 gpg hardness 0–.1 ppm iron
Temperature Range: 35–100°F / 2–38°C
Rated Filter Capacity (postfilter): 500 gallons (1895 litres)
Maximum Daily Production Rate: 75 gpd* (283 litres/day)
Membrane Discharge Water/Product Water Ratio: 1 to 1
Discharge Water/Product Water Ratio 1 Gal (3.8 L) QuickFlo: 2.7 to 1
Typical Product Water Production Rate 1 Gal (3.8 L) QuickFlo: 32.5 gpd (123 L/day)
Efficiency Rating1: 26.76% - Recovery Rating2: 35.2% 1 Gal QuickFlo
Discharge Water/Product Water Ratio 3 Gal (11.4L) QuickFlo: 2.7 to 1
Typical Product Water Production Rate 3 Gal (11.4L) QuickFlo: 35.5 gpd (134.4 L/day)
Efficiency Rating1: 27.52% - Recovery Rating2: 35.2% 3 Gal QuickFlo
Discharge Water/Product Water Ratio Standard Tank: 3 to 1
Typical Product Water Production Rate Standard Tank: 19.8 gpd (74.95 L/day)
Efficiency Rating1: 25.94% - Recovery Rating2: 35.2% standard tank
* Manufacturer’s calculated max. rate with open storage tank, inlet water pressure of 100 psi, temperature of
90°F and 100 ppm TDS conditions.
1 - Efficiency Rating means the percentage of the influent water to the system that is available to the user as
reverse osmosis treated water under operating conditions that approximate typical daily usage.
2 - Recovery Rating means the percentage of the influent water to the membrane portion of the system that
is available to the user as reverse osmosis treated water when the system is operated without a storage tank
or if the storage tank is bypassed.
U.S. Patent numbers 4,698,164; 4,629,568; 4,650,586
Canadian Patent number 1,323,310
18
The Kinetico Drinking Water System Plus Deluxe
Kinetico Drinking Water System Plus Deluxe VX and GX models are tested and certified
by NSF International and WQA against the requirements of NSF/ANSI Standard 42 for
the reduction of aesthetic chlorine, taste and odor and Standard 58 for the reduction of
pentavalent arsenic, barium, raduim 226/228, cadmium, copper, cysts (including oocysts of
cryptosporidium and cysts of giardia and entamoeba), fluoride, hexavalent chromium, lead,
nitrate/nitrite (with test kit, part no. 7329), selenium,TDS (commonly comprised of calci-
um, magnesium, sodium, iron, manganese, bicarbonate, sulfate and carbonate), trivalent
chromium and turbidity.VX models are tested and certified to NSF/ANSI Standard 53 for
VOC,lead and MTBE reduction.(See performance data sheet for individual contaminants
and reduction performance.) Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the system. Systems certified for
cyst reduction may be used on disinfected water that may contain filterable cysts.
Plus Deluxe models are acceptable for treatment of influent concentrations of no more than 27 mg/L
nitrate and 3 mg/L nitrite in combination measured as N and are certified for nitrate/nitrite reduction
only for water supplies with a pressure of 280 KPa (40 psi) or greater.
NSF International and WQA certify our product performance, and review our manufacturing facility
and procedures to assure product consistency and integrity.They also assure that our literature accurate-
ly reflects our product capabilities.
The system and installation must comply with state/provincial and local laws and regulations.

Maintenance Record
Kinetico Drinking Water Model: ___________________________________
Prefilter Type:___________________________________________________
MACguard Postfilter Type: ________________________________________
19
Date Prefilter
Changed
Postfilter
Changed
Membrane
Changed
TDS of
Treated
Water
Sanitized

Système Kinetico Plus
Deluxe pour eau de boisson
Guide d’utilisation
Nous vous félicitons d’avoir choisi Kinetico pour améliorer la qualité de
votre eau. Vous allez immédiatement constater les nombreux avantages
qu’apporte une eau de qualité dans votre maison grâce au système de
traitement d’eau Kinetico.
Depuis 1970, Kinetico Incorporated conçoit et fabrique des produits pour
améliorer la qualité de votre eau. Kinetico offre une gamme complète de
systèmes pour la qualité de l’eau afin de résoudre vos problèmes d’eau.
Pionniers dans le traitement non électrique de l’eau fonctionnant à la
demande, Kinetico définit en permanence les orientations de l’ensemble de
l’industrie du traitement de l’eau.
« Kinetico », le logo Kinetico et la « petite fille buvant de l’eau » sont des marques déposées de Kinetico
Incorporated, Newbury, Ohio.FABRIQUÉ AUX ÉTATS-UNIS