King Canada KC-1632DS User manual

16” OPEN WIDE
BELT SANDER
INSTRUCTION MANUAL
COPYRIGHT ©2001 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
MODEL: KC-1632DS

IMPORTANT INFORMATION
2-YEAR
LIMITED WARRANTY
FOR THIS 16” OPEN WIDE BELT SANDER
KING CANADA TOOLS
OFFERS A 2-YEAR LIMITED WARANTY
FOR NON-COMMERCIAL USE.
PROOF OF PURCHASE
Please keep your dated proof of purchase for warranty and servicing purposes.
REPLACEMENT PARTS
Replacement parts for this tool are available at our authorized KING CANADA service centers across Canada. For servicing, contact
or return to the retailer where you purchased your product along with your proof of purchase.
LIMITED TOOL WARRANTY
KING CANADA makes every effort to ensure that this product meets high quality and durability standards. KING CANADA warrants to
the original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free
from defects in materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents,
repairs or alterations and lack of maintenance. KING CANADA shall in no event be liable for death, injuries to persons or property or
for incidental, special or consequential damages arising from the use of our products. To take advantage of this warranty, the product
or part must be returned for examination by the retailer. Shipping and handling charges may apply. If a defect is found, KING CANADA
will either repair or replace the product.
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.
KING CANADA TOOLS INC. DORVAL, QUEBEC, CANADA H9P 2Y4

SAFETY RULES FOR WIDE DRUM SANDERS

ELECTRICAL INFORMATION

INTRODUCTION

PLANNING & UNPACKING

FEATURES

ASSEMBLY

ADJUSTMENTS

ADJUSTMENTS

ADJUSTMENTS

ADJUSTMENTS

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

MAINTENANCE OF UNIT

MAINTENANCE OF UNIT

MAINTENANCE OF UNIT