King of Shaves Prostyle Multi Styler User manual
WARNING
•This device is not a toy and is not intended for use by or on children.
•This device is intended for household / personal use only.
•Do not use the device if it has a damaged foil, blade, or cutting unit as injury may occur.
•Do not expose the device to direct sunlight, extreme temperatures or heated surfaces.
•This device should never be submerged or exposed to water.
IMPORTANT
To reduce the risk of burns, fire, or electric shock:
•Never reach for an electric appliance that has fallen into water.
•Do not use the charging adapter while bathing or in a shower.
•Do not charge the device where the power adapter or unit could fall into water or any other liquid.
•Always unplug the adapter from the electrical outlet after charging.
•Use this product only for its intended use as described in these instructions. Do not use any
attachments or accessories which have not been explicitly recommended by the manufacturer.
•The product should never be exposed to temperatures less than 32°F / 0°C or more than 105°F /
40°C for longer than 2 hours.
•Avoid handling the adapter with wet hands or storing it in a damp environment.
•Periodically check the adapter and cord for damage.
•Never operate this device if it has a damaged cord or plug or is not working properly.
•Keep the cord, adapter and trimmer away from heated surfaces.
•Do not operate where aerosol (spray) products or oxygen are being used.
• When charging, attach the adapter to the trimmer first, then to the outlet.
•In compliance with California law (Proposition 65), we notify you that this shaver may contain
lead in the soldering of the circuit board.
•Users with any form of pacemaker or similar device should contact their doctor or healthcare
provider before using this product.
CHARGING
Depending on hair growth / length, the device will provide approximately 45 minutes of operation
after a full 6 hour charge.
1. With the device resting in a safe position, first attach the adapter to the base of the styler and
then to a power outlet.
2. Charge the Multi Styler and reference the information on the device’s LCD screen
(see LCD Screen section of these instructions for more details).
3. Do not charge the device for more than 24 hours.
4. Disconnect the adapter from the base of the device once charging is complete.
Please note: When charging for the first time, or after a long period of non-use, the rechargeable
battery can be optimised in the following way:
•Charge the device for at least 8 hours.
•Empty the battery through normal use (trimming and styling).
•Repeat this process several times.
USING THE MULTI STYLER
The device can be used to trim your facial hair / stubble in a variety of dierent lengths and styles.
1. Attach the desired styling head and trimming guide (if required).
2. Power the device ON and OFF using the slide switch on the side of the product.
3. For best results, use controlled, even movements against the growth of hair.
4. Apply only light pressure – it’s not necessary to press hard or with undue force.
5. For best performance when trimming longer hair, it may be necessary to periodically pause
trimming and clear excess hair from the blades and guide.
Thank you for purchasing the King of Shaves Prostyle Multi Styler.
To ensure you have the best possible experience with this product,
please read all instructions and precautions carefully before use.
HYPOALLERGENIC BLADES
FOR HOME, GYM AND TRAVEL
RECHARGEABLE BATTERY
ADJUSTABLE TRIMMER GUIDE
2MM — 8MM
LCD POWER DISPLAY
LARGE BEARD / STUBBLE TRIMMER
AND COMPACT DETAIL TRIMMER
SMOOTH FINISH FOIL SHAVER
AND NOSE TRIMMER
CLEANING & MAINTENANCE
Always clean the Multi Styler with the power turned OFF and the charging adapter detached. The trimming guides and attachment heads
can be removed from the device and rinsed under running water, but the body of the device should never be submerged or exposed to
water. The blades should be cleaned with a small brush and wiped clean with a soft, dry cloth. For best performance we suggest occasion-
ally lightly oiling the blades with a drop of mineral oil. Store the device in a cool, dry place.
CUSTOMER CARE
call 0800 0838416 (UK only) or write to The King of Shaves Company Ltd.,
10 Penn Road, Beaconsfield, Bucks HP9 2LH, United Kingdom.
JOIN OUR KINGDOM
Find out more about King of Shaves Prostyle eGrooming™, Razors, Shaving
and Skincare for men at: www.kingofshaves.com
© 1993–2013 The King of Shaves Company Ltd. ®and TM denote trademarks. K-OS 3022 / 14141993A v1.1. Made in China. E&OE
LCD SCREEN
This device features an LCD screen (Fig. 5) that displays
useful information about the unit’s power level.
TRIMMING GUIDES
The Styler comes with three trimming guide attachments
(2–8mm adjustable plus 12mm and 15mm fixed) for use with
the large beard and stubble trimmer head.
Only install or remove the trimming guides with the large
trimmer head securely attached to the device (see Changing
the Styling Heads above).
To attach a trimming guide, first fit the guide’s teeth over the
front of the blades. Then push down until the guide locks over
the rear of the trimmer head (Fig. 3).
Use the push button on the rear of the adjustable trimming
guide to change the length setting (Fig. 4).
Tip: Before attaching the adjustable trimming guide, adjust the
guide length to its longest setting as this makes it easier to
attach it to the large beard and stubble trimmer head.
Fig. 5: The Multi Styler’s LCD
information display
Charge icon
illuminates to
indicate the unit
is charging
Power bars reflect
battery level and scroll
during charging
Low battery icon
appears when battery
level drops below 20%
Prostyle logo illuminates
when device is powered
on or charging
Percentage of
battery charge
remaining
CHANGING THE STYLING HEADS
The Multi Styler includes four interchangeable styling heads:
•Large beard and stubble trimmer.
•Compact styling detail trimmer.
•Mini foil shaver.
•Precision nose trimmer.
To swap between them:
1. Ensure the device is powered OFF using the switch on
the side of the body.
2. Grip the head securely by the plastic enclosure (not
by the blades) and gently twist in an anti-clockwise /
counter-clockwise direction while pulling it away from
the device’s body (Fig. 1).
3. Position the new head on the device’s body so the
positional markings align, and twist in a clockwise
direction to lock it in place (Fig. 2).
Important: Do not operate the styler without a head
securely attached.
Fig. 2: How to attach
a styling head
Fig. 3: How to attach a trimming guide Fig. 4: How to change the length setting
on the adjustable trimming guide
Fig. 1: How to remove
a styling head
Press and slide to
adjust guide length
