King's Brand D1754-T User manual

NOTE TO CUSTOMERS:
For ease and speed of assembly we recommend that before you commence each step of the
assembly that you identify all the parts required to complete that step.
We recommend that where possible you allow sufficient space to assemble the item as close
as possible to the place where it will be once assembled.
For the protection of your furniture we recommend that the product is placed on protected
surfaces during assembly to prevent any damage.
During assembly do not over tighten the screws or bolts, as this may damage the product.
Please ensure you retain all the product packaging until the item is completely assembled.
Periodically check all fitting and re-tighten as necessary.
Never allow any liquids to remain on your furniture as absorption can cause the wood to warp
or finish to de-laminate.
It is recommended that this item should be assembled by two adults.
ASSEMBLY INSTRUCTIONS
MODEL # D1754-T SOLID FIXTOP COUNTER-HT
TRESTLE TABLE
PAGE 1 OF 3www.kbfurniture.com

PAGE 2 OF 3
ASSEMBLY INSTRUCTIONS ITEM # D1754-T TRESTLE TABLE
PARTS IDENTIFICATION
A- Table Top 1 pc
B- Trestle Leg 2 pcs
D- Mounting Plate 2 pcs
C- Stretcher 1 pc
E- Cover Piece 2 pcs
HARDWARE IDENTIFICATION
1- Hex Nut 5/16” x 6.5 mm 4 pcs
4- Lock Washer 5/16” x 13mm 16 pcs
5- Flat Washer 5/16“ x 18mm 16 pcs
7- Allen Key M5 x 2 1/2” 1 pcs
6- Wrench 12.8m 1 pcs
NOTE: Quantities shown are for one table. Bolts are metric screw threads
Ø8mm
Ø 5/16”
Ø 5/16”
2- JCBB Bolt M8 x 40mm 8 pcs
Ø8mm
1 1/2”
3- JCBB Bolt M8 x 80mm 4 pcs
Ø8mm
1 1/2”

PAGE 3 OF 3
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 3
Wood Dowel
A
B
C
D
1
2
3
4
4
4
5
5
5
6
7
7
E
ITEM # D1754-T TRESTLE TABLE