Kings Power KP-210 User manual

1
(1) Specifications:
1. Power supply100, 110, 200, 220, 230 V AC (as
designated), 50/60 Hz, single phase.
2. Power consumption Normal2W(MAX 30W)
3. Standard time signalQuartzoscillation
4. Time accuracy 3 seconds per week
5. Securityfor power failure Fulloperation of allfunctions after
power failure, and memory back-up
for subsequent 36 months.
6. Use environment Temperature: 0ºC - 40ºC
Humidity: 40% - 80% (without
condensation)
7. Externaldimensions 190mm(W)X 210mm(H) X 130mm(D)
8. Weight Approx. 3 kg.
9. Standard time card 86mm(W)X 186mm(H) (Semi-monthly)
10. Accessories Operation manual1 copy
Fuses 2 pcs Keys 2 pcs
Dust cover 1pc

2
(2)Features
1. Programmed controlof workhours
Printingline,2color ribbonswitching, IN/OUTposition, internal melody
andexternal timesignal canbeoptionally set in78steps.
2. Weekly program
Day of the weekcanbe programmedinweeks.
3. Automaticmonth-end adjustment
Month-endadjustment isautomatically madeirrespectiveofoddand
evenmonths orordinary or leap year, if it is programmed.
4. Timesignalfunction
Durationoftimesignal canbesetfrom 0-99 seconds.
5. IN/OUTfunction
IN/OUTspacingpositioncanbeset by electronic programming.
6. Securityfor power failure (Applicablefor models withback-upbattery)
(1) Ni-Cd battery ensuresprinting full operationafterpowerfailure.
(2) When thebattery voltage dropstoo lowfor thetimetobeprinted, the
LCD displaygoesout. Bothtimeandprograms areretainedby a
lithium battery for about36months.
(3) Afterpower is restored, thetimerecorder will automatically advance
tothepresent time.
7.Timedisplay
(1) The display ofdigital series is alarge, easy-to-readLCD.It shows
date,AM/PM (when set to12-hour system), time, day of week and
other codes.
(2) The display ofanalogseriesusespointers and asmall LCD for display
functions.
8. Specialfunctions (overseas specifications)
Summer timecontrolandautomaticmonth-endadjustment by aspecial
calendar areavailable.
Functionsvary withthemodel.Seethetable offunctionsby model on
theprecedingpage.
Specifications and functionsaresubjecttochange withoutnotice for
improvements.

3

4
(1) Installation
Power source:
1) Use a power source with a stable voltage.
2) Use a power source which isindependent from other
equipment.
Installation:
Install the recorder on a stand 75 cm to 80 cm high.
Avoiding installing the machine in anyof the following places:
1) Placeswhere it maybe exposed to thedirect rays of the sun or
high temperature such asa heater.
2) Placeswhere temperature are extremelyhigh.
3) Placeswhere it maybe exposed to rain wateror high humidity
conditions, resulting in condensation.
(3)Wall Mounting
1) Place 3 screwsabout 95 cm to 125 cm above the floor.
2) Hookthe unit on the screwsthrough the holeson the back cover,
asshown in the figure.

5
3. SETTING
Openthelidwiththepoweron toenterprogram statusanduse buttons
on operationpaneltosettheprogram. Thefunctions of each buttonlistedas
bellows:
PRO: Press the"PRO" buttontoselect the program group. InP1 status,
press the"PRO" toenterP2status, press the"PRO" againtoenter
P3status.
CL: Press the+ and - buttonat the sametimetocancel the existing program
contents.
(1) SettingofYear, MonthandDate
Example: ChangeOctober14, 1999(Thursday) to November22,
1999 (Monday)
1) Open thelid,the LCD displaysP1.
2) PressF1button.
PRO F1F2F3F4 F5E －
●●●●●●●●●
3) Press the+ or - buttontochangethe year
to99 andpress the"E" button. Ifit is not
necessary tochange theyear, press the
"E" button.
4)Press the+ or - buttontochangethe
month to11 and pressthe"E" button.Ifit
is not necessary tochangethemonth,
press the "E" button.
TH
TH

6
5) Press the+or - buttontochangethe date
to22andpress the"E" button. If it is not
necessary tochangethedate, press the
"E" button.
6) Press the+or - buttontochangetheday
ofweek toMO andpress the"E" button.
Ifit is not necessary tochange theday
ofweek,press the "E" button.
7) The LCD goesoff,thesettingis completed. Closethelid.If
required,other settings canbeperformed beforeclosingthelid.
(2) Settingof Time System, Hour andminute
Example: Change15:14PM, 24hourdisplay to10:30AM, 24hour
display.
1) Open thelid,theLCD displaysP1
2) Press F2button
PRO F1F2F3F4 F5E －
●●●●●●●●●
3) Press the+ or - button tochange thehour
system to24andpress the"E" button. If
it is notnecessary tochangethetimesystem,
pressthe "E" button.
4) Press the+ or - buttontochangethe hour to
10 andpress the"E" button. Ifit is not necessary
tochangethehour, press the "E" button.
5) Press the+ or - buttontochangethe minute
to30 andpress the"E" button. Ifit isnot
necessary tochange theminute,press
the "E" button.
TH

7
6) The LCD goesoff,thesettingis completed. Closethelid. If required,
other settings canbeperformed beforeclosing the lid.
(3) Settingimprint:
CARD
MORNING AFTERNOON OVERTIME IN OUT IN OUT IN OUT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
The surfacedetectionfunctionoperatesonly when youuseour standard
card(01monthly pay cards) or anequivalent withasurfacedetection
cut-out.
1) Cardtypecanbe selectedfrom 01-10the modewhichapplies to
thecardyouuse.
Cardtype Value
Monthly pay (cardsurfacedetectionoperational) 01 (pitch6mm)
Monthly pay (cardsurfacedetectionnotoperational) 02 (pitch6mm)
Weekly pay (Bottom space23mm) 03 (pitch6mm)
Weekly pay (Bottom space35mm) 04 (pitch6mm)
Weekly pay (Bottom space70mm) 05 (pitch7mm)
Weekly pay (Bottom space23mm) (vertical) 06 (pitch6mm)
Upper step
Lowerstep
Bottomspace

8
Weekly pay (Bottom space35mm) (vertical) 07 (pitch6mm)
Weekly pay (Bottom space70mm) (vertical) 08 (pitch7mm)
Special card (Bottom space23mm) (vertical) 09 (pitch6mm)
Full-monthly printing(Bottomspace5mm) 10 (pitch5mm)
Monthly pay (Bottom space 23mm) 11(pitch6.1mm)
Upperstepbi-weekly pay (bottom space23mm) 12 (pitch7mm)
Lowerstepbi-weekly pay (bottom space23mm) 13(pitch7mm)
Upperstepbi-weekly pay (bottom space35mm) 14 (pitch7mm)
Lowerstepbi-weekly pay (bottom space35mm) 15(pitch7mm)
Weekly pay (Bottom space23mm) 16 (pitch7mm)
Weekly pay (Bottom space23mm) 17 (pitch7mm)
Please refer P.21 Setting specialcard.
2) Minuteindication canbeselected from01-04
MinuteindicationValue
Minute01
1/100 hourA 02
1/100 hour B 03
1/10hourA 04
1/60 Hour 00 01 02 03 04 05 06 07 08 09 ~ 29 30 31 32 33 34 35 ~ 54 55 56 57 58 59
1/100 Hour A 00 02 03 05 07 08 10 12 13 15 ~ 48 50 52 53 55 57 58 ~ 90 92 93 95 97 98
1/100 Hour B 00 00 00 05 05 05 10 10 10 15 ~ 45 50 50 50 55 55 55 ~ 90 90 90 95 95 95
1/10 Hour 00 00 00 00 00 01 01 01 01 01 ~ 04 05 05 05 05 05 05 ~ 09 09 09 09 09 09
3) Day ofthe week indication
Imprintof day of weekValue Example
Noindication 00 Blank
Date01 01,02, ~31.
English 02 SU, MO,~SA.
Italian 03 DO, LU, ~SA.
German04 SO, MO,~SA
French 05 DI,LU,~SA.
Spanish06 DO,LU,~SA.
Japanese 07 日,月, ~ 土.
Number08 D7,D1,D2,~D6.

9
4) Example
Initial valueof cardtype andimprint is 02 0101, monthly pay card
withcardsurfacedetection not operational,minuteindication in
minuteandday of theweek indicationindate.
Tochangetolower step weeklypay(bottomspace35mm), minute
indicationinminuteand day of the weekindication inEnglish, perform
the following:
a. Openthelid, the LCD displaysP1.
b. Press F3button.
PRO F1F2F3F4 F5E －
●●●●●●●●●
C. Press the+ or - buttontochangethecard
typeand pressthe"E" button.Ifitis not
necessary tochange thetype, press the
"E" button.
d. Press the+ or - buttontochangethe minute
indicationandpressthe "E" button.Ifitis not
necessary tochange it, press the "E" button.
e. Press the+ or - buttontochangethe dayof
theweek indicationand pressthe"E" button.
Ifit is not necessary tochange it,
press the"E" button.
f. The LCD goesoff, the settingis completed. Closethe lid. If required,
other settings canbeperformed beforeclosing the lid.
(4) Settingsummertime
Toset summer time,thereare2options. Option 1:by date,option2:
by weekly.Eachoptionhas 2programs thatmust be set
simultaneously. Setprogram 1tostart summer time,program 2toend
summer time.
Example 1: (Option1:by date)
Startingdateandtime:April 1,02:00
Endingdateandtime:October 1, 02:00
At 2:00AMon thefirst day of summer time,theclock automatically
gainsonehour toshow3:00AM.

10
When 2:00AMcomeson thelast dayofsummer time, it losesone
hour and returnto1:00AM.
a. Openthelid, the LCD displaysP1.
b. PressF4button.
PRO F1F2F3F4 F5E －
●●●●●●●●●
c. Press the + or - buttontochangeoption1,
andpress the"E" button.
d. Press the+ or - buttontochangethe hour
to2andpress the "E" button.Ifit is not
necessary tochange it, press the"E" button.
e. Press the +or - buttontochangethemonth
to04 (April) andpress the"E" button. If it is
notnecessary tochangeit,press the
"E" button.
f. Press the+or - buttonto changetheday
to01 andpress the"E" button. Ifit is not
necessary tochange it, press the"E" button.
g. The LCD will displayas shownandthe setting
oftheending datewill start.
f. Press the+or - buttontochangetheday
to01 andpress the "E" button. Ifit is not
necessary tochange it, press the"E" button.
h.Following theaboveproceduresfrom step (d) tosetthe endingdate
ofsummer time.
i.The LCD goesoff,thesettingis completed.Closethe lid. If required,
other settings canbeperformed beforeclosing the lid.

11
Example2: (Option2:by weekly)
Startingdateandtime: 2004/3/28 SUN
Ending dateandtime:2004/9/26 SUN
Ifset as the above, theunit remembersthestart dateasthelast
Sunday of Marchandtheenddateas the last Sundayof October.
Onceset, theunit automatically updates thesettingevery year
thereafter. Nofurther manual setting isnecessary.
At 2:00AMon thefirst day of summer time,theclock automatically
gainsonehour toshow3:00AM.
When 3:00AM comeson thelast dayofsummer time, it losesone
hour and returnto1:00AM.
a. Openthelid,theLCD displays P1.
b. PressF4button.
PRO F1F2F3F4 F5E －
●●●●●●●●●
c. press the+ or - buttontochangeoption2,
andpress the"E" button.
d. Press the+ or - buttontochangethe year
to04 andpress the"E" button. Ifit isnot
necessary tochange it, press the"E" button.
e. Press the+ or - buttontochangethe month
to03 (May) and pressthe"E" button. If itis
notnecessary tochangeit,press the
"E" button.
f. Press the+or - buttontochangetheday
to28 andpress the"E" button. Ifit is not
necessary tochange it, press the"E" button.
Andthenthe “SU”is blinking, press “E”
buttonagain. The startingdateofsummer
timehasbeen set.
TH
MO
SU

12
g.TheLCD will displayas shownandthe
settingoftheendingdatewill start.
h. Followingtheaboveproceduresfrom step
(d) tosetthe endingdateof summer time.
(5) Changingpayperiodendingdate
Initial value ofpayendingdateis 3101FR, monthly payending dateis
31,weekly pay endingdateis Fridayandthe1st row is setas ablank
row.
Monthly pay ending dateBlank row
FR
CARD CARD
MORNING AFTERNOON OVERTIME MORNING AFTERNOON OVERTIME
IN OUT IN OUT IN OUT
IN OUT IN OUT IN OUT
16
1 17
2 18
3 19
4 20
5 21
6 22
7 23
8 24
9 25
10 26
11 27
12 28
13 29
14 30
15 31
Card surface Card back
1) Change payendingdate(Monthly pay)
Ablankrow meansarow is left blankoutofthe32rows onthe
Weeklyp
ay
ending date
1st row
16th
r
ow
17th row
32nd row
Bla
nk
row

13
surfaceand back of atimecard. Printingpositionof pay ending
dateis onerowabovetheblank row.
Example: Changethepayendingdateto20thandblankrow to16th
row, perform thefollowing:
18
19
20
a. Openthelid,theLCD displays P1.
b. Press F5button.
PRO F1F2F3F4 F5E －
●●●●●●●●●
c. Pressthe + or - buttontochangethepay
endingdateto20andpress the"E" button.
Ifit is not necessary tochange it, press
the"E" button.
d. Press the+ or - buttontochangetheblank
row to16andpress the "E" button.Ifit is
notnecessary tochangeit,press the
"E" button.
e. Thedayof week will blink. Press the"E"
button, theLCD goesoff,thesetting is
completed. Closethelid.Ifrequired,other
settings canbeperformed beforeclosing
thelid.
2) Changepay endingday (Weeklypay)
Printingformatofweeklycardhavetwostyles: horizontaland vertical
style.Payending dateforhorizontalstylecardis setat thelastrowof
thetimecard. Whileverticalstylecard hasno imprintforpayending
date.
Example: ChangethepayendingdatetoSunday,perform the
following:
a. Openthelid,theLCD displays P1.
Payending
Blankrow
FR
FR
FR

14
b. Press F5button.
PRO F1F2F3F4 F5E －
●●●●●●●●●
c. Press the"E" buttontwice, the day of week will blink. Press the+ or
- buttontochange the day of week toSU andpress the"E" button.
The LCD goes off, thesettingis completed.
Closethelid. Ifrequired,othersettings
can beperformedbeforeclosingthelid.
Pleaserefer totheimprint setting for weekly pay cardselection.
Horizontal weekly cardVertical weeklycard
Payending day is Sunday Pay endingday is Sunday
NO.
NAME
NO.
NAME
MORNING AFTERNOON OVERTIME
IN OUT IN OUT IN OUT
MON TUE WEDTHU FRI SAT
MO
IN
TU OUT
WE IN
TH OUT
FR IN
SA OUT
SU
(6) Daytime change
The initial valuefor day timechangehasbeen set at00 00.Theprint
row is changedat00:00.
Example:Setthe daytimechange at03:30AM, perform the following:
1) Openthelid,theLCD displays P1.
SU

15
2) Press thePRObutton,theLCD displaysP2.
PRO F1F2F3F4 F5E －
●●●●●●●●●
3) Press F1buttonandusethe+ or - button
tochangethehourofdaychangeto03and
press the"E" button. Ifit is not necessary
tochangeit,press the "E" button.
4) Press the+ or - buttontochangethe
minuteof day changeto30 and press
the"E" button. If it is notnecessary
tochangeit,press the "E" button.
(7) Changingtime signal length
Initial valueoftimesignal lengthhasbeensetto05.Thelength of
timesignal is 5seconds.
Example:Change the initial valueto10seconds, perform thefollowings:
a. Openthelid, the LCD displays P1.
b.PressthePRO button,theLCD displays P2.
PRO F1F2F3F4 F5E －
●●●●●●●●●
c.Press F2buttonand usethe + or - button
tochangetheseconds to10andpress the
"E" button.TheLCD goesoff, the setting
is completed. Closethelid. Ifrequired,
othersettings canbe performedbefore closing thelid.
(8) Settingtime signal
Totaling42 programs can beset andcanbe operatedatanygiven

16
time oronany dayoftheweek.
Example:Setatimesignal soundat8:00,MondaytoFriday, andat
05:00PM, every dayof theweek.Perform the followings:
1) Openthelid, the LCD displays P1.
2) Press thePRO button,theLCD displays P2.
PRO F1F2F3F4 F5E －
●●●●●●●●●
3) Press F3buttonandusethe+ or - button
tochangethehour to08 and pressthe "E"
button. Ifit is notnecessary to change it,
press the"E" button.
4) Press the+or - buttontochangethe
minuteto00andpress the"E" button. If it
is notnecessary tochangeit, press the
"E" button.
5) Day ofweekdisplaySU will blinking,
thenpressthe "E" button toregister
the setting.Whenthenext program
number 026666appears, the registration
is completed.
6) Press the+or - buttontochangethe
hour to17 andpress the"E" button.
Ifitis notnecessary tochangeit,
pressthe"E" button.
7) Press the+or - buttontochangethe
minuteto00and pressthe"E" button.
Ifitis notnecessary tochangeit,
pressthe"E" button.
8) Day of weekdisplay SUwill blinking,
press+ buttontoaddthe day thattime
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
MO TU WE TU FR

17
signal is soundedand press - buttonto
cancelthetimesignal. Toregister
thesetting,pressthe "E" button.
When thenext programnumber036666 appears, theregistrationis
completed. Closethelid.
Changing(confirming) the time signal setting
1) Openthelid,theLCD displays P1.
2) Press thePRObutton, the LCD displaysP2.
PRO F1F2F3F4 F5E －
●●●●●●●●●
3) Press F3button, theLCD will displaydata
ofgroup 1you havejust entered. Ifyou
don't wanttochangeit, press F3button
tomovetogroup2. Followingthisprocedure
tothespecificgroupyouwanttochange
(confirm). Press + and - buttonatthesame
timetodeletethedataand enter thecorrect time ofsignal. Press the
"E" buttontoregister it. Whenthe next programnumber appears, the
registrationis completed.
(9) Settingtime of ribboncolorchange
Totaling18programs canbesetand can beoperated atany giventime
or onanyday of the week. Oddgroups imprintRED color,Evengroups
imprint BLUEcolor.
Example:RED printingat08:01(all days ofweek) and BLUEprinting
at17:00(from MondaytoFriday). Perform the following:
1) Openthelid, the LCD displaysP1.

18
2) Press the PRO button,theLCD displays P2.
PRO F1F2F3F4 F5E －
●●●●●●●●●
3) Press F4buttonandusethe+ or - button
tochange thehour to08andpress the
"E" button.If it is notnecessary to
change it,press the"E" button.
4) Press the + or - button tochange the
minuteto01and pressthe"E" button.
Ifitis notnecessary tochangeit,
pressthe"E" button.
5) Dayof week displaySU will blinking,
thenpressthe "E" button toregister
thesetting. Whenthenext program number
026666 appears, theregistration
is completed.
6) Press the + or - button tochange the
hour to17 andpress the"E" button.
Ifitis notnecessary tochangeit,
pressthe"E" button.
7) Press the+ or - buttontochangethe
minuteto00andpress the"E" button.
Ifitis notnecessary tochangeit,
pressthe "E" button.
8) Dayof week displaySU will blinking,
press+ buttontoaddthe day thatribbon
color change isswitchedand press -
button tocancel thecolor change.
Toregister the setting, press the"E"
button.Whenthenext programnumber 036666 appears, the
registrationis completed. Closethelid.
Changing(confirming) the ribboncolorchange setting
1) Openthelid, theLCD displays P1.
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
MO TU WE TU FR

19
2)Press thePRObutton,theLCD displaysP2.
PRO F1F2F3F4 F5E －
●●●●●●●●●
3) Press F4button,theLCD will display data
ofgroup1youhavejustentered.If you
don't want tochangeit, pressF4button tomove
togroup2. Followingthis procedure tothe
specific groupyouwanttochange (confirm).
Press +and - button atthesame timetodeletethedata and enter the
correct timefor color change. Press the"E" button toregister it.
When thenext programnumber appears, theregistrationis completed.
(10)Settingtimeof IN/OUTauto-shift position
Totaling 18programs canbesetandcan beoperatedat anygiventime
or onanyday of theweek.
Thepositioncodehastobeenteredbeforeinputthetimeof auto-
shift. Thepositioncodeas bellows:
Example:Morning IN 07:00 (everyday)
AfternoonOUT04:00PM(from Monday toFriday)
1) Openthelid, theLCD displays P1.
2) Press the PRO button,theLCD displays P2.
PRO F1F2F3F4 F5E －
●●●●●●●●●
3) Press F5buttonandusethe +or - button
tochange theposition codeto11andpress
the"E" button. Ifit isnotnecessaryto
11Morning
13 Afternoon
15 Overtime
IN
IN
IN
12 Morning
14 Afternoon
16 Overtime
OUT
OUT
OUT

20
change it,press the"E" button.
4) Press the+or - buttontochangethe
hour to07andpress the"E" button.
Ifitis notnecessary tochangeit,
pressthe"E" button.
5) Press the+or - buttontochangethe
minuteto00and pressthe"E" button.
Ifitis notnecessary tochangeit,
pressthe"E" button.
6) Day of weekdisplay SUwill blinking,
thenpressthe "E" button toregister
thesetting. Whenthenext program number
126666 appears, theregistration
is completed.
7) Press the+or - buttontochangethe
positioncodeto14andpress the"E"
button.
8) Press the+or - buttontochangethe
hour to16 andpress the"E" button.
Ifitis notnecessary tochangeit,
pressthe"E" button.
9) Press the+or - buttontochangethe
minute to00and pressthe"E" button.
Ifitis notnecessary tochangeit,
pressthe"E" button.
10) Day of weekdisplay SUwill blinking,
press+ buttontoaddthe day that
auto-shift is operational and press -
button tocancel this function.
Toregister the setting, press the"E"
button. Whenthenext programnumber
156666 appears, theregistration is
completed. Closethelid.
Changing(confirming) the time ofIN/OUTauto-shiftposition
1) Openthelid, the LCD displaysP1.
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
SU MO TU WE TU FR SA
MO TU WE TU FR