KINGSIGMAL MT1 User manual
Registered trademark of Kingsignal Technology Co., Ltd. All trademarks mentioned in this
manual are owned by their respective owners.
The product specification and related information are just for reference. There may not be any prior notice
about the update of contents. Unless there are any other agreements, this manual is only for guidance. All
the statements made do not constitute a warranty of any kind.
Address: 26th Floor, Block B, Building 10, Shenzhen Bay Eco-Technology Park, No.10, High-tech
South 9th Road, High-tech Zone, Yuehai Street, Nanshan District, Shenzhen, China
Website: www.kingsignal.com
Note: The product images in this guide are for demonstration purposes only. Please refer to the actual
model for the number of antennas,number of ports, type and location.
Product Appearance
Press to restore the
router to factory settings
Reset Button:
For manual networking pairing
(only when you need the
fourth or more routers)
Smart networking key:
Each MT1 has a LED that shows its status, one WAN
port, two LAN ports and a power input.
White light on
Red light on
Blue light on
Green light on
Red light flashing
White light on
Red light on
Blue light flashing
Green light on
Green light flashing
Red light flashing
Starting
Waiting for configuration
Pairing with the extender
Starting
Not connected to the main router
Connected to the main router
Connecting to the main router
As the main
router (use WAN)
As the extender
(use LAN)
LED
Configuration complete
but no Internet connection
Configuration complete
and connected to the Internet
Searching for the main
router (already connected before)
Connected to the main
router but the connection is bad
For connecting with computer
or other wired equipment
Follow the steps below to plug in the main router and
download the KSLINK APP
How to set up your MT1
*The one connected to the modem will be the main router
Plug in power adaptor Connect to the modem
or
APP DOWNLOAD
3. Refer to the label at the
bottom for the default SSID
and password, and connect it
on your phone.
4. Open the “KSLINK” APP,
create an administrator
password and click “Save”.
Find the Wi-Fi and connect it on your phone
7. Go back to the main interface and enter your password.
The main router has been set and you can open the router
management interface.
*You need to keep the default Wi-Fi connected
5. Choose your time zone
and click “Save”.
6. Select your type WAN
access according to your
situation/network needs
and click “Save”.
Follow the steps below to complete the basic settings
of your APP
How to set up your MT1
*Dynamic IP is recommend
*The other two routers are set as extenders *The distance or barriers between routers will
affect the network quality
9. Plug in your other two routers
in the designated positions, and
they will be connected to the
main router automatically.
10. If the extender’s LED red
light is on or the green light
is flashing, please adjust
the position and reconnect
to the main router.
Follow the steps outlined to learn more about APP
management and set up your MT1 Whole-Home Wi-Fi system
How to set up your MT1
8. You can set the Wi-Fi, update software online, use guest
mode and more in the “Settings” menu.
What if I want to manage the Wi-Fi system via website?
Connect to the Wi-Fi on your phone or PC first.
Enter the URL http://192.168.6.1 to access the management website.
Follow the guide and complete the basic settings.
Please ensure that your Modem is lining with the cable used by the computer.
If there is still no Internet connection, kindly contact your Internet provider.
Login to http://192.168.6.1 and redo the setting again.
Restart the router and try again.
Kindly confirm that the computer is set to obtain IP address automatically.
Ensure the URL 192.168.6.1 you typed into the browser is correct.
Try using another browser.
Restart the router and try again.
Why does the login page not appear after entering the URL
http://192.168.6.1?
When the router is running, press the "RESET" button at the back of the
router for 5 seconds until the red light begins flashing.
Refer to "How do I restore the router to factory settings?" to restore factory
settings and log in according to the SSID and default password at the back
of the router.
If it is the main router, please confirm that:
A. Is the network cable connection loose or not?
B. Is the router connected to the Internet correctly?
C. Or contact your Internet provider and inquire if the network
connection is good or not.
If it is the extender, please adjust the position of the router and repair.
Please power up the router again or restore it to the factory settings
Please login to the "KSLINK" APP or the interface of the management website,
click “Setting” “Wifi Setting” “ ”, then you can see your password.
What if there is no Internet connection?
How do I restore the router to factory settings?
Frequently Asked Questions
Dear Customers,
Thank you for shopping with KINGSINGAL. In order to protect your legitimate
rights and interests, please read the following terms and conditions carefully
after purchasing:
First, the following conditions are not included in the free maintenance,
but at KINGSIGNAL, we can offer paid service. That is:
1. The warranty period has expired.
2. Failure to install, use, store, or maintain the product as instructed, resulting
in product failure or damage.
3. Modifying and/or tearing the bar code.
4. Unauthorized changes to the inherent setting documents and unauthorized
destruction or machine maintenance.
5. Accidental damage, such as improper supply voltage input, water, mechanical
damage, fall, etc.
6. Damage caused by transportation, loading and unloading during product repair.
7. Product failure or damage caused by irresistible forces such as earthquakes,
fires, floods, lightning strikes, etc.
Secondly, at KINGSIGNAL, we are committed to providing a one-year free warranty
for our after-sales service.
Special note:
1. The warranty period for the external power supply is 1 year. If the power adapter
is obviously damaged due to improper use or accidental factors, such as damage
by hard objects, cracks, severe deformation, or the tearing down of the power
cord, etc., then the external power supply cannot be replaced. However, the user
can purchase separately.
2. The warranty or replacement shall only be included for the main machine. The
packing or accessories are excluded from the warranty and replacement.
3. If there is any problem with the device’s performance and there is no obvious
damage to the product appearance, we can replace it to you with a new product;
Within the free replacement period, after thorough inspections from KINGSIN-
GAL and existing breakdowns confirmed, there will be a non-defective product
replacement for the same model . Those defective products which have been
replaced belong to KINGSINGAL. Those products without problems after inspec-
tions will be returned to the customer.
4. When carrying out the warranty or replacement service, please bring along the
corresponding invoice. If the proof of purchase cannot be presented, then the
free warranty period for the product will begin from the date of manufacture.
5. The shipping fees for the returned products should be paid up by who raises for
the shipping.
Lastly, under the national laws and regulations, the right of interpreting and modifying
this commitment is owned by KINGSINGAL.
Product warranty card
Table of contents
