Kingston Technology StorCase Technology Rhino JR RJR110 User manual

StorCase® Technology
Rhino®JR
RJR110
IDE Removable
Drive Enclosure
User's Guide
Part No. D89-0000-0258 A02 July 2005
StorCase Technology, Inc.
7600 Newhope Street
Fountain Valley, CA 92708-9885
Phone [phone]
Fax [phone]
All manuals and user guides at all-guides.com
all-guides.com

StorCase Technology, Inc.RJR110 Users Guide - Rev. 02
1
LIMITED WARRANTY
STORC SE TECHNOLOGY, Incorporated (StorCase) warrants that its products will be free
from defects in material and workmanship, subject to the conditions and limitations set forth
below. StorCase will, at its option, either repair or replace any part of its product that proves
defective by reason of improper workmanship or materials. Repair parts or replacement
products will be provided by StorCase on an exchange basis, and will be either new or
reconditioned to be functionally equivalent to new.
This warranty does not cover any product damage that results from accident, abuse, misuse,
natural or personal disaster, external power surge or failure, or any unauthorized disassem-
bly, repair or modification. StorCase will not be responsible for any software, firmware or other
customer data stored within, or interfacing with a StorCase product.
Duration of Warranty
Seven-Year Warranty: The following StorCase products are covered by this warranty for a
period of seven (7) years from the original date of purchase from StorCase or its authorized
resellers: all Data Express® removable device enclosures and all Data Silo®, Data Stacker® and
InfoStation® external expansion chassis, except for those components integrated into or
purchased separately for use with these products which are identified and covered by the three-
year or hard drive warranties described below. ll StorCase interface cables and other
accessories specifically intended for use with the StorCase products identified above are also
covered by this (7) year warranty.
Three-Year Warranty: The following components integrated into or purchased separately for
use with StorCase Data Express, Data Silo, Data Stacker and/or InfoStation products are subject
to warranty for a period of three (3) years from the original date of purchase from StorCase or
its authorized resellers: all R ID controllers, power supplies, fans and blowers.
Two-Year Warranty: The following StorCase products are covered by this warranty for a
period of two (2) years from the original date of purchase from StorCase or its authorized
resellers: all Rhino®JR fixed external expansion chassis (model types FJR) and all RhinoJR
removable device enclosures (model types RJR).
One-Year Warranty: ll StorCase products identified as Reconditioned or Special Inventory
are covered by this warranty for a period of one (1) year from the original date of purchase from
StorCase or its authorized resellers. Reconditioned products may only be exchanged for
reconditioned products.
Hard Disk Drive Warranty: ll hard disk drives purchased from StorCase or through its
authorized resellers, whether purchased separately or integrated into StorCase products, are
subject to the warranty terms and conditions provided by the drive manufacturer.
Third Party Software Warranty: ll third party software purchased from StorCase for use
with and/or as part of StorCase products is subject to the warranty terms and conditions
provided by the software manufacturer.
All manuals and user guides at all-guides.com

RJR110 Users Guide - Rev. 02
StorCase Technology, Inc.
2
Warranty Claim Re uirements
To obtain warranty service, the defective product must be returned to your local authorized
StorCase dealer or distributor, or, with prior StorCase approval, to the StorCase factory
service center.
For defective products returned directly to StorCase, a Return Material uthorization (RM )
number must be obtained by calling StorCase Customer Service at [phone]. The RM
number must be prominently displayed on the outside of the return package. Shipments must
be freight-prepaid and insured, and must include the product serial number, a detailed
description of the problem experienced, and proof of the original retail purchase date. Products
must be properly packaged to prevent damage in transit. Damage resulting from improper
packaging will not be covered by this warranty. The StorCase factory service center is located
at 17650 Newhope Street, Receiving Dock, Gate #4, Fountain Valley, C 92780, U.S. .
Free Technical Support
StorCase provides free technical support. If you experience any difficulty during the
installation or subsequent use of a StorCase product, please contact StorCases Technical
Support Department prior to servicing your system. This warranty covers only repair or
replacement of defective StorCase products, as described above. StorCase is not liable for,
and does not cover under warranty, any costs associated with servicing and/or installation
of StorCase products.
StorCase Technical Support can be reached in the U.S. at [phone] or toll-free at (888)
435-5460 (U.S. and Canada only). StorCase European Technical Support can be reached in
the U.K. at [phone].
Disclaimers
The foregoing is the complete warranty for the products identified above and
supersedes all other warranties and representations, whether oral or written.
StorCase expressly disclaims all warranties for the identified products, which are
not stated herein, including, to the extent permitted by applicable law, any implied
warranty of merchantability or fitness for a particular purpose. In no event will
StorCase be liable to the purchaser, or to any user of a StorCase product, for any
damages, expenses, lost revenues, lost savings, lost profits, or any other
incidental or conse uential damages arising from the purchase, use or inability
to use a StorCase product, even if StorCase has been advised of the possibility
of such damages.
Copyright © 2005 StorCase Technology. ll rights reserved. ll registered
trademarks are the property of StorCase Technology. ll other logos and trademarks
are properties of their respective companies.
All manuals and user guides at all-guides.com

StorCase Technology, Inc.RJR110 Users Guide - Rev. 02
3
Declaration of Conformity
StorCase Technology, Inc.
17600 Newhope Street
Fountain Valley, C 92708
RhinoJr. RJR110 Removable Drive Enclosure
S21B109
EN 55022: 1998
- EN 61000-3-2 Harmonic Current
- EN 61000-3-3 Voltage Fluctuations and Flicker
EN 55024: 1998 ITE Immunity
- EN 61000-4-2 - EN 61000-4-5
- EN 61000-4-3 - EN 61000-4-6
- EN 61000-4-4 - EN 61000-4-11
FCC Part 15, Class B
S/NZS 3548 Information Technology Equipment
2004
Company Name:
Corporate Office Address:
Product Name:
Model Number:
Conforms to the following standards:
EMC Directives:
(89/336/EEC)
EMI Standards:
EMC Standards:
Year of Manufacture:
Signature:___________________
Full name: Dieter Paul
Position: President
All manuals and user guides at all-guides.com

RJR110 Users Guide - Rev. 02
StorCase Technology, Inc.
4
INTRODUCTION
WARNING: The RhinoJR contains NO USER SERVICE BLE P RTS inside the unit. Refer
LL servicing to qualified service personnel!
The StorCase Technology RhinoJR RJR110 removable drive carrier and receiving frame
provides low cost, durable and reliable mounting for 3.5 Ultra T 100 or 133 drives within
5.25 half-height peripheral slots. The RhinoJR is constructed of lightweight aluminum and
polycarbonate and allows a drive to be removed and transported to another RhinoJR-
equipped computer or expansion chassis, and also provides the ability to secure sensitive
data by removing and storing the drive safely for future use.
The RhinoJR carrier is also available separately. Contact your StorCase dealer for further
details and ordering information.
Figure 1: RhinoJR RJR110 Removable Drive Enclosure
Carrier
Receiving
Frame
All manuals and user guides at all-guides.com

StorCase Technology, Inc.RJR110 Users Guide - Rev. 02
5
Front Panel
(Figure 2)
 Key Lock/Drive Power Switch - Performs three functions. The key switch assures
proper seating of the drive carrier within the receiving frame, turns power to the drive
carrier ON and OFF, and prevents unauthorized removal or installation of the carrier. For
the computer to access data on the disk drive, the key must be turned counterclockwise
to the locked position.
 LEDs:
Power - Steady glow indicates power ON.
Drive - Steady glow indicates that drive is inserted and ready for access.
Activity
Flashing indicates drive is being accessed.
Figure 2: Front Panel
Key
Lock
Power
LED
Drive
Activity
LED
Carrier
Handle
All manuals and user guides at all-guides.com
all-guides.com

RJR110 Users Guide - Rev. 02
StorCase Technology, Inc.
6
Rear Panel
(Figure 3)
 DC Power Connector: Uses a standard 4-pin DC Power Connector to accept DC power.
 I/O Connector: The input/output connector provides a standard interface for all IDE
signals.
 Fan: Receiving frame fan provides enhanced heat dissipation (4.7 CFM).
Figure 3: Rear Panel
I/O
Connector
DC Power
Connector
Fan
All manuals and user guides at all-guides.com

StorCase Technology, Inc.RJR110 Users Guide - Rev. 02
7
INSTALLATION
NOTE: #1 and #2 Phillips screwdriver will be required for this procedure.
1. Remove cover from the carrier by turning screw clockwise. Slide the cover off
carrier (Figure 4).
2. Carefully insert drive (not included) into the carrier. Slide the drive towards the rear
of the carrier. If necessary, loosen adjustment screw and adjust the carrier DC
power connector (Figure 5) so that the drive connectors can mate with the carrier
connectors. Once the drive and carrier are mated, tighten the adjustment screw
to secure power connector into place.
Turn the drive/carrier assembly over.
3. Bottom-mount the drive into the carrier with four (4) Phillips screws (Figure 6).
Reinstall cover onto the carrier.
Secure the cover by turning the screw counterclockwise a few rotations only. Do
not turn the screw too many times in a counterclockwise direction or the screw
will be removed.
T rn Screw
Clockwise
Slide Cover
Off
12
Close-Up
View of Screw
Figure 4: over Removal
All manuals and user guides at all-guides.com

RJR110 Users Guide - Rev. 02
StorCase Technology, Inc.
8
Figure 6: Installing a Drive into the arrier
Adj st if
Necessary
Loosen Screw
to Adj st
Figure 5: Adjusting the D Power onnector
IDE Drive
(Not Incl ded)
Bottom-Mo nt
Drive
12
All manuals and user guides at all-guides.com

StorCase Technology, Inc.RJR110 Users Guide - Rev. 02
9
Installing the Receiving Frame
The drive should be installed into the carrier before installing the receiving frame into the
mounting bay of a computer or expansion chassis.
1. Turn OFF power to computer or expansion chassis.
2. Open computer or expansion chassis according to manufacturers instructions. If
necessary, temporarily remove any expansion boards that may make installation
difficult.
3. With the drive carrier locked into place inside the receiving frame, install the RhinoJR
into the 5.25 drive opening in the computer or expansion chassis. Fasten into
place with the four (4) #6-32 Phillips Pan Head screws provided.
4. djust the front of the receiving frame so that the carrier slides freely in and out of
the receiving frame guides. The position of adjoining peripheral units may require
adjustment.
5. Connect the I/O cable from the host adapter to the receiving frame.
6. Connect the DC power cable from the DC power supply in the computer or expan-
sion chassis to the power connector on the RhinoJR receiving frame rear panel.
7. Replace any expansion boards that may have been removed earlier. Replace the
system cover according to the manufacturers instructions.
8. Reconnect any system or peripheral cables removed earlier.
9. Turn ON power to the computer. If the installation was successful, and all cables
have been properly attached, the system should boot normally.
All manuals and user guides at all-guides.com

RJR110 Users Guide - Rev. 02
StorCase Technology, Inc.
10
SPECIFICATIONS
These specifications are for reference only.
Physical
Specifications Receiving Frame
Height 1.65" (41.9mm)
Width 5.75" (146.1mm)
Depth 8.94" (227.1mm)
(1)
Environmental Specifications
Operating Storage
Ambient Temperat re 0° C to 40° C -40° C to 70° C
Rel tive Humidity (1) 20% to 80% 15% to 90%
Altitude -1000 to 10,000 ft -1000 to 40,000 ft
-305m to 3048m -305m to 12195m
(1)
Non-condensing with m ximum gr dient of 10% per hour
(2)
11 msec pulse width 1/2 sine w ve
Weight 1.0 lb (0.45kg)
Weight with NO drives inst lled
4.7 CFM
Cooling
(Tot l for 1 F n)
(1)
NOTICE: This User's Guide is subject to periodic updates without notice. While reason-
able efforts have been made to ensure accuracy of this document, StorCase
Technology, Inc. assumes no liability resulting from errors or omissions in this
publication, or from the use of the information contained herein.
Please check the StorCase website at http://www.storcase.com or contact
your StorCase representative for the latest revision of this document.
All manuals and user guides at all-guides.com
all-guides.com