Kingtop KT-KP18 User manual

Quick Start Guide
Handheld Computer KT-KP18
Manual Version: V1.0

Disclaimer
Thank you for purchasing our products, please read this manual carefully before use.
If the product fails during use, please contact our after-sales staff in time.
The product is upgraded according to the customized version. Product upgrades may
result in some of the functions of the product does not match the manual, please
prevail in kind, or contact our customer service staff.
If you do not follow the instructions in the manual to operate, and therefore any loss
caused by the user shall be borne by the user.
The final interpretation of this book belongs to our company.
Attention:
1. The installation and maintenance of this product by professionals, please do not
disassemble and maintenance and other operations.
2. Product scanning module is a type II beam, please do not look directly at it.
3. Avoid using in the strong light source direct light and light source is not stable place,
so as not to affect the service life of the photoreceptor.
4. In order to protect the safe use of equipment, please be sure to use the standard
power adapter, away from sources of ignition.

Contents
1. Product structure schematic .......................................... - 1 -
2. SIM card/battery installation method: ............................- 2 -
3.Keys & Description ........................................................... - 2 -
4.Specification ...................................................................... - 3 -
5. Common Problems and Solutions ................................. - 4 -

-1-
1. Product structure schematic
1. handset
5. function keys
9. USB charging
13. fingerprints
2. indicator
6. front camera
10. flash
14. speaker
3. volume key
7. power on key
11. rear camera
15. external contacts
4. scanner key
8. scanner key 2
12. scanner
module
16. battery cover
switch

-2-
2. SIM card/battery installation method:
3.Keys & Description
Keys
Description
HOME key
Go back to the standby screen
Task Manager key
Go to Task Manager
Back key
Return to previous screen
Power on/off key
Switch on/off; hibernate/wake up;, long press 10 seconds to
restart
Volume keys
Adjust volume level
Sweep key 1
Press to scan 1D/2D code
Sweep key 2
Press to scan 1D/2D code

-3-
4.Specification
Memory
RAM 4GB ROM 64GB
Photo Pixel
Front Camera: 500W Rear Camera: 1300W
Fill light
LED flash
Video
File format MP4 Video encoding:H264/H265
Support Barcode System
Video Resolution:1080P / 720P
NFC
PDF417, QR Code, DataMatrix, AZTEC, Hanshin Code,
Maxicode, Micro QR,Micro PDF417, Composite,
etc.EAN13, EAN8, UPCA, UPCE, Code 128, Code 39,
Codabar, UCC/ EAN13, EAN8, UPCA, UPCE, Code 128,
Code 39, Codabar, UCC/EAN128, RSS,ITF, ITF14, ITF6,
ISSN, ISBN, Standard 25, Matrix 25,Industrial 25,Plessey,
MSI Plessey, Code 11, Code 93, etc.
Battery
13.56MHz Support ISO14443A/B, ISO15693
Rechargeable
Replaceable battery with 4000mAh capacity
USB Port Type
5V/2A
Full Charge Time
TYPE-C
WIFI Network
≤4 hours
Positioning
Support
Memory Card Type
GPS/Galileo/GLONASS/Beidou3

-4-
5. Common Problems and Solutions
If an abnormality occurs while using the phone, refer to the following table for
troubleshooting.
FQ
Causes
Solutions
Poor
reception
Use of cell phones in areas with poor
reception, such as near tall buildings or
in basements, where radio waves
cannot be transmitted effectively
Avoid as much as possible
Related to the proximity of the
transmitting base station built by the
network.
Service area maps can be
requested from ISPs
Echo or
noise
Caused by poor network trunking, which
is a regional problem.
Hang up and redial, trunks
may be replaced with better
lines
Poor wiring in some areas
Shortened
standby
time
Battery needs to be replaced
Replace the battery with a
new one
When no signal is received, the cell
phone will keep transmitting to find a
base station, which consumes a lot of
battery power, resulting in shorter
standby time.
Move to a location with a
strong signal or turn off your
cell phone temporarily.
Unable to
turn on the
Battery drained
Check the battery level or
charge it

-5-
phone
SIM card
error
SIM card is damaged
Contact your network service
provider
SIM card not properly installed
Make sure the SIM card is
installed
Dirt on the metal side of the SIM card
Wipe the metal contacts of the
SIM card with a clean cloth
Unable to
connect to
network
Invalid SIM card
Contact your network provider
Out of network service area
Check the service area with
your network provider
Weak signal
Move to a strong signal area
and try again
Unable to
make calls
Call barring feature in use
Cancel call barring settings
Fixed dialing feature used
Cancel fixed dialing settings
Unable to
charge
Damaged battery or charger
Replace the battery or charger
with a new one
Poor contact
Check if the plug is connected