Kitchen Cabinet Kings B09 User manual

LessCare
Cabinet
ASSEMBLY
GUIDE
KitchenCabinetKings.com
[phone]

www.KitchenCabinetKings.com • [phone] 2
THIS GUIDE APPLIES TO
THE FOLLOWING STYLES:
Cherryville
Newport
Geneva
Richmond

www.KitchenCabinetKings.com • [phone] 3
ASSEMBLY
INSTRUCTIONS
B09 B12 B15 B18 B21 B24 B27 B30 B33 B36
B39 B42 B45 B48 SCB36 SCB42 SCB48 SB60
VB1221 VB1518 VB1521 VB1818 VB1821
VB2421 VB3021 VB1218 VB1221 VB1518
CVSB6021 CVSB3618 CVSB3621 CVSB3921
CVSB4221 CVSB4821
STEP 
Aims at on the side panel on fastener and the back
panel fastener inserts afterwards, and then fasten
them using screwdriver to turn camlock 180 degree
clockwise.
STEP 
Assembly the drawer.
STEP 
Insert bottom panel in the grooves at the side panels.
STEP 
Facade under board and about side panels connection.
STEP 
Finally, the drawer which assembles installs to the
cabinet in.
STEP 
With rst step of same, other leans together the side
panel and the back panel connection.
STEP 
Aims at on the side panels after the facade in fastener
the fastener inserts, and then fasten them using
screwdriver to turn camlock 180 degree clockwise.

CHERRYVILLE & NEWPORT
DOOR STYLES
RICHMOND
DOOR STYLE
www.KitchenCabinetKings.com • [phone] 4
4. Take a pice of solid stock that is 1/4” thick and place it
on the top of the door of the cabinet.
5. Using the screws from a standard drawer secure the
drawer front to drawer box from inside of the cabinet.
4. Take a pice of solid stock that is 1” thick and place it on
the top of the door of the cabinet.
5. Using the screws from a standard drawer secure the
drawer front to drawer box from inside of the cabinet.
1. Assemble the drawer.
2. Secure drawer glides inside the cabinet.
3. Place assembled drawer box on the glides and
make sure that it locks it to place.
1. Assemble the drawer.
2. Secure drawer glides inside the cabinet.
3. Place assembled drawer box on the glides and
make sure that it locks it to place.

www.KitchenCabinetKings.com • [phone] 5
ASSEMBLY
INSTRUCTIONS
DB12 DB15 DB18 DB21 DB24 LRB30 LRB36 DB12F DB15F
DB18F DB2IF DB24F VDB1218 VDB1221 VDB15I8 VDB1521
VDB1818 VDB1821 VDB2421
STEP 
Aims at on the side panel on fastener and the back
panel fastener inserts afterwards, and then fasten
them using screwdriver to turn camlock 180 degree
clockwise.
STEP 
With rst step of same, other leans together the side
panel and the back panel connection.
STEP 
Insert bottom panel in the grooves at the side panels.
STEP 
Aims at on the side panels after the face frame in fastener
the fastener inserts,and then fasten them using screwdriver
to turn camlock 180 degree clockwise.
STEP 
Assembly the drawer.
STEP 
Facade under board and about side panels connection.

ASSEMBLY
INSTRUCTIONS
www.KitchenCabinetKings.com • [phone] 6
W3012 W3612 W3015 W3615 W3018 W3618 W3024 W3624 W0930 W1230 W1530 W1830 W2130
W2430 W2730 W3030 W3330 W3630 W3930 W4230 W4530 W4830 W0936 W1236 W1536 W1836
W2136 W2436 W2736. W3036 W3336 W3636 W3936 W4236 W0942 W1242 W1542 W1842 W2142
W2442 W2742 W3042 W3342 W3642 W3942 W4242 RW3312 RW3612 RW3315 RW3315 RW3615
RW3318 RW3618 RW3324 RW3624 SC3624 SC2430 SC3030 SC3630 SC2436 SC3036 SC3636 SC2442
SC3042 SC3642 WR3015 WR3615
STEP 
Aims at the side panel the top panel and the bottom
panel the fastener,and then fasten them using
screwdriver to turn camlock 180 degree clockwise.
STEP 
The door open, on the frame fastener aims at on the
side panles the fastener, and then fasten them using
screwdriver to turn camlock 180 degree clockwise.
STEP 
Insert back panel in the grooves at the rear of side
panels, and fasten it with screws provided.
STEP 
With rst step of same, together leans the side panel to
connectin addition.