
- Page 2 -
Audrey Counter Stool
Assembly Instructions STK #86575, #86576
Insert the cross bars (C)/(D)
onto the backrest (B)
Put the seat (A) and front legs
(F)/(G) onto the leaning back
(B) and side cross bar (C)/(D).
Press the end of the side cross
bar (C)/(D) into front legs
(F)/(G) and make sure the hole
on seat (A) align with the hole
of leaning back (B)
Tighten the front legs (F)/(G) to
the seat (A) with bolts 1, spring
washers 3 & 4 using Allen key 5,
then attached the seat A to leaning
back (B) with bolts 6, spring
washers 3 & 4 using Allen Key 5.
Do not fully tighten front legs
(F)/(G) to the seat (A) in this
assembly step
Tighten the cross bar (C)/(D) to the
leaning back (B) and the front legs
(F)/(G) with screws 2 using screw
driver. Tighten the front cross bar (E)
to the front legs (F)/(G) with screws 2
using screw driver. Then fully tighten
the front legs on the step 5
Insert the cross bar (E)
onto the front legs
(F)/(G)
Put front legs (F)/(G) onto the
seat (A)