KitchenAid KUDD03DTPA3 User manual

I_itc enAid _
DRAWER DISHWASHER
INSTALLATION INSTRUCTIONS
P
INSTRUCCIONES DE INSTALACION
P
DE LA LAVAVAJILLAS DE CAJON
INSTRUCTIONS D'INSTALLATION
LAVE-VAISSELLE A TIROIR(S)
Table of Contents/Jndice/Table des matieres .................................................................. 2
iMPORTANT:
Save for local electrical inspector's use.
Installer: Leave installation instructions with the homeowner.
Homeowner: Keep installation instructions for future reference.
IMPORTANTE:
Guarde para tenerlas a disposici6n del inspector de electricidad local.
Instalador: Deje las instrucciones de instalaci6n con el propietario.
Propietario: Conserve las instrucciones de instalaci6n para referencia futura.
iMPORTANT :
Conserver pour consultation par I'inspecteur local des installations 61ectriques.
Installateur : Remettre les instructions d'installation au propri6taire.
Propri6taire : Conserver les instructions d'installation pour r6f6rence ult6rieure.
W10300220B

TABLE OF CONTENTS
DISHWASHER SAFETY .............................................................................. 3
INSTALLATION REQUIREMENTS ............................................................ 4
Tools and Parts ........................................................................................ 4
Location Requirements ............................................................................ 5
Water Supply Requirements .................................................................... 5
Electrical Requirements ........................................................................... 6
Drain Requirements ................................................................................. 6
INSTALLATION INSTRUCTIONS .............................................................. 7
Unpack Dish Drawer ................................................................................ 7
Prepare Cabinet Opening ........................................................................ 7
Prepare Dishwasher ................................................................................. 8
Route Electrical Wiring ............................................................................. 9
Route Water Supply Line and Drain Hose ............................................ 10
Connect Water Supply Line and Drain Hoses ...................................... 11
Make Electrical Connection ................................................................... 12
Install Trim Pieces and Level Dishwasher ............................................. 13
Secure Dishwasher ................................................................................ 15
Complete Installation ............................................................................. 16
CUSTOM PANEL INSTALLATION INSTRUCTIONS ............................. 17
Custom Drawer Panel ............................................................................ 17
Preparing Custom Panel ....................................................................... 17
Install Panel Fasteners ........................................................................... 18
Mount the Custom Panel ....................................................................... 18
p
INDICE
SEGURIDAD DE LA LAVAVAJILLAS ...................................................... 19
REQUlSITOS DE INSTALACION ............................................................. 20
Piezas y herramientas ............................................................................ 20
Requisitos de ubicaci6n ........................................................................ 21
Requisitos del suministro de agua ........................................................ 21
Requisitos electricos .............................................................................. 22
Requisitos de desagQe .......................................................................... 22
INSTRUCCIONES DE INSTALACION ..................................................... 23
Desempaque el caj6n para platos ......................................................... 23
Prepare la abertura del armario ............................................................. 23
Prepare la lavavajillas ............................................................................. 24
Dirija el cableado electrico ..................................................................... 25
C6mo dirigir la linea de suministro de agua y la manguera
de desagOe ............................................................................................ 26
Conecte la linea de suministro de agua y las mangueras
de desagOe ............................................................................................ 27
Conexi6n del suministro electrico ......................................................... 29
Instale las piezas de adorno y nivele la lavavajillas ............................... 30
Asegure la lavavajillas ............................................................................ 32
Complete la instalaci6n ......................................................................... 33
INSTRUCCIONES DE INSTALACION DEL PANEL A LA MEDIDA ...... 34
Panel del caj6n a la medida .................................................................. 34
Preparaci6n del panel a la medida ........................................................ 34
C6mo instalar los sujetadores del panel ............................................... 35
C6mo montar el panel a la medida ....................................................... 35
TABLE DES MATIERES
SI_CURITI_ DU LAVE-VAISSELLE ........................................................... 36
EXIGENCES D'INSTALLATION ............................................................... 37
Outillage et composants ........................................................................ 37
Exigences d'emplacement .................................................................... 38
Specifications de I'alimentation en eau ................................................. 38
Sp6cifications electriques ...................................................................... 39
Exigence d'evacuation ........................................................................... 39
INSTRUCTIONS D'INSTALLATION ........................................................ 40
Deballage du lave-vaisselle ................................................................... 40
Am_nagement de la cavit6 d'encastrement du placard ....................... 40
Pr6paration du lave-vaisselle ................................................................. 41
Installation du c&blage _lectrique .......................................................... 42
Acheminement du conduit d'alimentation en eau et du tuyau
de vidange .............................................................................................. 43
Raccordement du conduit d'alimentation en eau et des tuyaux de
vidange .................................................................................................. 44
Raccordement du circuit electrique ...................................................... 46
Installation des pieces de garniture; etablissement de I'aplomb
du lave-vaisselle .................................................................................... 47
Arrimage du lave-vaisselle ..................................................................... 49
Achever I'installation .............................................................................. 49
INSTRUCTIONS D'INSTALLATION DU PANNEAU PERSONNALISI_. 50
Panneaux des tiroirs personnalis_s ...................................................... 50
Preparation du panneau personnalise .................................................. 51
Installation des dispositifs de fixation du panneau ............................... 51
Montage du panneau personnalise ....................................................... 51
2

DISHWASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
• Read all instructions before using the dishwasher.
• Use the dishwasher only for its intended function.
• Use only detergents or rinse agents recommended for use
in a dishwasher, and keep them out of the reach of children.
• When loading items to be washed:
1) Locate sharp items so that they are not likely to damage
the door seal; and
2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.
• Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
• Do not touch the heating element during or immediately
after use.
• Do not operate the dishwasher unless all enclosure panels
are properly in place.
[] Do not tamper with controls.
[] Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.
[] To reduce the risk of injury, do not allow children to play in
or on the dishwasher.
[] Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
[] Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
SAVE THESE INSTRUCTIONS
Tip Over Hazard
Do not open dishwasher drawer until dishwasher is inside the cabinet opening.
if the dishwasher is not in the cabinet opening, slowly open the drawer while someone grasps
the rear of the dishwasher.
Failure to follow these instructions can result in death or serious injury.
You need to:
• Slowly open dishwasher drawer while someone grasps the
rear of the dishwasher. Remove shipping materials. Close
dishwasher drawer. Latch the dishwasher drawer shut.
• Observe all governing codes and ordinances.
• Install this dishwasher as specified in these instructions.
Have everything you need to properly install dishwasher.
Contact a qualified installer to ensure that dishwasher is
installed to meet all electrical and plumbing national and local
codes and ordinances.

INSTALLATION REQUIREMENTS
_4_9 __ _J_ _'__
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
• Pliers
• Phillips screwdriver
• Flat-blade screwdriver
• ¾e" and 1¼,,nut drivers or
hex sockets
• Measuring tape or ruler
• 1Y2" hole saw bit
• 10" adjustable wrench
• Utility knife
• Level
• Cordless drill
•V8"drill bit
• Security T-20 TORX®tdriver
(on some models)
Pa_s Needed
A. 72" (182.9 cm) flexible water supply fine
B. Zip tie
C. Appropriate sized UL Listed wire connectors (2)
1-®TORX is a registered trademark of Acument Intellectual Properties, LLC
Parts Supplied
Check that all parts are included.
A. _" UL Listed/CSA Approved
strain relief
B. 1.25" hose clamp
C. Mounting bracket screws (8)
D. Unit mounting screws (4)
E.Drain hose connector
F. Mounting brackets (4)
G. Drain connector spring clamps (2)
_G
N
H. Trim strips (2)
I. Toe kick brackets (2)
J. Toe kick bracket screws (2)
K. Toe kick trim
L. Panel fasteners (on some
models) (2)
M. TORX®tscrews (on some
models) (10)
N. Drain hose

IMPORTANT: Observe all governing codes and ordinances.
Failure to meet codes and ordinances could lead to fire or
electrical shock.
Proper installation is your responsibility.
• Contact a qualified installer to ensure that the dishwasher is
installed to meet all electrical and plumbing national and local
codes and ordinances.
• Install the dishwasher as specified in these instructions.
• Have everything you need to properly install dishwasher.
• Avoid damage from freezing to dishwasher and water lines
leading to dishwasher. Damage from freezing is not covered
by the warranty.
• This dishwasher is manufactured for indoor use only.
• Install and level dishwasher on a floor that will hold the weight,
and in an area suitable for its size and use.
Product Dimensions
24,, .... 23 ,,
(61 cm)
333/4"
(85.7 cm)
48.9 cm)
11/2"
(3.75 cm)
Installation Clearances
Cutout Dimensions
+
................................................................................................................................................../
(61 cm) /
Preferred Utility Area
(13crn)
A. Left-hand or right-hand water connection route
B. Left-hand or right-hand electric connection and drain route
NOTE: All holes should be drilled at 1V2" (3.8 cm) diameter.
• A hot water line with 20 to 120 psi (138 to 862 kPa) water
pressure.
• 120°F (49°C) water temperature at dishwasher.
• Flexible stainless steel braided fill line (1/2"minimum plastic
tubing is not recommended).

Electrical Shock Hazard
Plug into agrounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
[]
GROUNDING iNSTRUCTiONS
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the
risk of electric shock by providing a path of least
resistance for electric current. The dishwasher is
equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is installed and
grounded in accordance with all local codes and
ordinances.
WARNING: Improper connection of the
equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or
service representative if you are in doubt whether the
dishwasher is properly grounded. Do not modify the
plug provided with the dishwasher; if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
For apermanently connected dishwasher:
The dishwasher must be connected to a grounded
metal, permanent wiring system, or an equipment-
grounding conductor must be run with the circuit
conductors and connected to the equipment-
grounding terminal or lead on the dishwasher.
SAVE THESE INSTRUCTIONS
Contact a qualified electrician.
Ensure that the electrical installation is adequate and in
conformance with all national and local codes and ordinances.
You must have:
• 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply.
• Copper wire only.
We recommend:
• A time-delay fuse or circuit breaker.
• Aseparate circuit.
If direct wiring dishwasher:
• Use flexible, armored or nonmetallic sheathed, copper wire
with grounding wire that meets the wiring requirements for
your home and local codes and ordinances.
• Use strain relief method provided with house wiring junction
box or install a UL Listed/CSA Approved clamp connector to
the house wiring junction box. If using conduit, use a
UL Listed/CSA Approved conduit connector.
If connecting dishwasher with a power supply cord:
• Use Power Supply Cord Kit (Part Number 4317824) marked
for use with dishwashers. Kit contents include:
• Voltex, Inc., UL Listed 16-gauge 3 wire power supply cord
with 3 prong grounded plug.
• Neer C-500 7/8"strain relief.
• 3 wire connectors.
• Part Number 302797 grommet.
Follow the kit instructions for installing the power supply cord.
• Power supply cord must plug into a mating three prong,
grounded outlet, located inthe cabinet next to the dishwasher
opening. Outlet must meet all local codes and ordinances.
IMPORTANT: If you plan to install a garbage disposer, an
additional separate 120-volt, 60 Hz, AC-only, 15 or 20 amp fused
electrical supply is required.
Use the new drain hose supplied with your dishwasher. If this
is not long enough, use a new drain hose with maximum
length of 12 ft (3.7 m) that meets all current AHAM/IAPMO test
standards, is resistant to heat and detergent, and fits the
1" (2.5 cm) drain connector of the dishwasher.
Connect drain hose to waste tee or disposer inlet above drain
trap in house plumbing and 20" (50.8 cm) minimum above the
floor. It is recommended that the drain hose either be looped
up and securely fastened to the underside of the counter, or
be connected to an air gap.
Drain Air Gap
Use a drain air gap if the drain hose is connected to house
plumbing lower than 20" (50.8 cm) above the subfloor or floor.
Use 1/2"(1.3 cm) minimum I.D. drain line fittings.
6

INSTALLATION INSTRUCTIONS
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
2. Turn off water supply.
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
1. Read valuable information on exterior of shipping box before
opening.
2. Remove shipping materials, tape and film from the
dishwasher. Remove parts package from inside the
dishwasher.
1. To ensureminimum clearancedimensionsexist:
• Measure thedistancefromthe cabinetcountertopto the
floorand ensure333/4''(85.7cm) minimum height.
• Measure thedistancefromthe frontof thecabinettothe
back wall and ensure 24" (61 cm) minimum depth.
• Measure the distance from the left-hand side to the right-
hand side of opening and ensure 24" (61 cm) minimum
width.
2. Drill 1Y2"(3.8 cm) diameter holes for drain and water hoses
and electrical wiring as shown. Holes should be placed
1/2"(1.3 cm) from back wall.
1/2"
_(1.3cm)
n
A. Choose left-hand or right-hand water hose route.
B. Choose left-hand or right-hand electric wire and drain route.
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797,
provided with cord kit).
3. Install mounting brackets 17" (43.2 cm) from floor using
screws provided. If needed, drill 1/8"pilot holes in cabinet.
17"
(43.2 cm)
4. Decide which dishwasher-to-counter attachment method will
be used.

Option 1: Solid surface countertop installation
• Install second set of mounting brackets 331/2"(85 cm) from
floor. If needed, drill 1/8"pilot holes in cabinet.
Option 2: Wood countertop installation
• Prepare dishwasher by folding over tabs located on the
top front as shown.
........ _ ....
Tip Over Hazard
Do not open dishwasher drawer until dishwasher is
inside the cabinet opening.
if the dishwasher is not in the cabinet opening, slowly
open the drawer while someone grasps the rear of the
dishwasher.
Failure to follow these instructions can result in death
or serious injury.
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
1. Measure cabinet opening height from floor to bottom of
countertop.
8

2. Using two or more people, place corner packaging on the
floor and place dishwasher on its back.
3. Adjust leveling legs based on the cabinet opening
measurement and the chart below.
:::::!!!!!!!!!!!!....
-E
H :X
33 _" (86 cm) : 0"
34" (86.3 cm) : _" (0.3 cm)
34 _" (86.7 cm) :¼" (0.6 cm)
34 _" (87 cm) : _" (1 cm)
34_" (87.3 cm) :V2" (1.3 cm)
H
34½" (87.6cm)
34_" (87.9 cm)
34_" (88.3 cm)
34_" (88.6 cm)
35" (88.9 cm)
4. Place dishwasher in upright position.
:X
:_" (1.6 cm)
:%" (1.9 cm)
:_" (2.2 cm)
:1" (2.5 cm)
:1 _" (2.9 cm)
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
Follow all national and local codes and ordinances for completing
electrical supply to cabinet.
Option 1: Right-Hand Side Utility Route
Route wire through 1V2" (3.81 cm) hole located 8" (20.32 cm) above the
floor.
After routing the electrical wire through the right-hand hole, attach
the wire to back left-hand side of cabinet wall 8" (20.32 cm) above
the floor. Then continue routing the wire along the left-hand side of
cabinet opening to the front of the opening.
Option 2: Left-Hand Side Utility Route
q
Route wire through 1V2"(3.81 cm) hole located 8"
(20.32 cm) above the floor.
After routing the electrical wire through the left-hand hole,
continue routing the wire along the left-hand side of cabinet to the
front of the opening.

1.
2.
k_,"__" _ _e_ S_:_p_t_J_ _ _ L,:i:_e2_d __.......i_ ......
Connect water supply line to water valve on dishwasher.
Slide clamp onto drain hose, and then push hose into "Y"
connector until fully seated. Several clicks will be heard.
\
3. Slide clamp into position over the "Y" connector.
Option 1: Right-Hand Side Utility Access
• For right-hand routing, place the water supply line in the
clips.
• Route drain hose on clips on bottom/back of unit.
Option 2: Left-Hand Side Utility Access
• For left-hand routing, place hose in clip on bottom right-
hand side of the dishwasher.
10

1=
2=
3.
• Route water supply line and drain hoses into the cabinet.
• Slide dishwasher partway into the cabinet opening. Allow
for access to the electrical terminal box.
I I = ........
Connect water supply line to the water valve under the sink.
A. Hot water supply
Slide clamps onto drain hoses (Figure A). Do not cut drain
hoses.
Push hose into drain connector until fully seated (Figure B).
Several "clicks" will be heard.
4= Slide clamp into position (figures C and D).
A B
CD
5. Connect the drain hose using one of the following options:
Option 1: Waste Disposer No Drain Air Gap
A C
A. For new construction, remove disposer plug.
B. Connect drain connector to waste disposer.
C. Tightenclamp.
NOTE: This connection must be before the drain trap and at least
20" (50.8 cm) above the floor where the dishwasher will be
installed. It is recommended that the drain hose be looped up and
securely fastened to the underside of the counter.
Option 2: No Waste Disposer and Drain Air Gap
A. Drain air gap
B. Drain hose connector
C. Waste
11

Option 3: Waste Disposer and Drain Air Gap
A........................
B.............
A.Drain air gap
B.Drain hoseconnector
C. Waste
Option 4: No Waste Disposer, No Drain Air Gap
B
A. Drain hose connector
B. Waste
NOTES:
• Attach the drain hose connector to the water waste line
using the supplied hose clamp.
This connection must be before the drain trap and at least
20" (50.8 cm) above the floor where the dishwasher will be
installed. It is recommended that the drain hose be looped
up and securely fastened to the underside of the counter.
6. Turn on water and check for leaks.
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
1. Remove screw securing the electrical box cover. Remove
cover.
2. Route electrical wires through strain relief and secure to
electrical plate.
12

Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Connect wires as follows using twist-on connectors sized to
connect direct wire to 16-gauge dishwasher wire.
Power supply wire: Terminal box wire:
white white
black black
ground wire _ _ ground connector
4. Attach ground wire to the green ground screw.
\\\
B
A. Attach ground wire to green screw.
B.Attach white and black wires.
5= Reinstall electric box cover with all wires contained inside the
terminal box.
NOTE: Do not plug into outlet until instructed to do so.
1. Open bottom drawer.
2. Push in clips and slide rails back 5" (12.7 cm).
3. Lift drawer off slide rails. Place drawer off to the left on
covering. Slide rails into dishwasher.
13

4. Slide the dishwasher into position in the cabinet opening.
Check that the drain hose and electrical wiring are not kinked.
5. Check left to right level by placing the level on the top of the
drawer. Check front to back level by placing level on the slide
rails.
6.
7.
Adjust legs with a 3/le"socket wrench to level the dishwasher.
A. Adjust legs.
Rest the trim strip on the floor and mark the trim at the top of
the frame flange height. Pick the closest groove to the mark. If
the mark is between 2 grooves, choose the groove that makes
the trim strip the shortest. On a covered surface, cut the trim
strip at the selected groove. Pull dishwasher back out of
cabinet opening about 6" (15.24 cm)
8. Attach the toe kick bracket to the frame.
9. Place the trim strip into the toe kick bracket.
10. Attach the toe kick bracket on the opposite side.
14

11. Place the flexible side trim strips on both sides as shown.
12. Slide the dishwasher back into position in the cabinet
opening. Check that the drain hose and electrical wiring are
not kinked.
1= Remove top drawer (same procedure as followed to remove
bottom drawer) and set drawer on bottom drawer separated
with corner packaging.
2= Attach dishwasher to the lower cabinet mounting bracket
(installed earlier).
A. Attach dishwasher to lower cabinet mounting bracket.
3. Attach dishwasher to upper cabinet mounting brackets.
Option 1: Solid surface countertop
Attach dishwasher to the side cabinet mounting brackets
(installed earlier).
A.Attach dishwasher to side cabinet mounting brackets.
Option 2: Wood countertop
Attach the dishwasher to the countertop using the folded over
mounting tabs located on the top of the dishwasher.
A
\\
A. Attach dishwasher to countertop using folded over mounting tabs.
15

1. Pull top drawer slide rails out and set top drawer on slide rails.
2. Pull slide rails forward until they snap into position.
3. Push top drawer inand repeat above steps for bottom drawer.
4. In the cabinet under the sink, coil excess drain hose and wrap
with a zip tie.
Electrical Shock Hazard
Plug into agrounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
5. Plug in dishwasher or reconnect the power.
/
6. Select the Rinse Only cycle and press START/RESUME. Allow
the dishwasher to fill, rinse and drain. Check for leaks. If leaks
are found, secure the connection and repeat this step.
If you need Assistance or Service:
Please reference the "Assistance or Service" section of the User
Instructions or contact the dealer from whom you purchased your
dishwasher.
16

CUSTOM PANEL INSTALLATION INSTRUCTIONS
If you plan to install a custom wood panel, you will need to create
the panel yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
• Thethickness of the custom panel must be W' (1,3cm)to 3/4"
(1.9cm).
• Do not exceed the height dimension for the custom panel. A
panel that exceeds the height dimension may damage the
drawer dishwasher, cabinets or countertop.
• The width of the custom panel may vary according to the
width of the cabinet opening.
Custom Panel Dimensions
Upper Drawer Panel
3 ii
¼
(1,9 cm)/
237/16'' >,
(59.5 cm)
16W'
(41.3 cm)
Lower Drawer Panel
237/%''
< (59.5 cm)
3II
'/4
(1.9cm)/,
Hardware Installation
Center the hardware (left to right) onto the custom panel. When
installing the hardware, be sure that the mounting screws are flush
with the back of the custom panel.
1,
2.
Lay the custom panel face down on a clean, soft work
surface.
Using a pencil, mark the centerpoints for the 2 panel fastener
pilot holes and 6 pilot holes needed for the panel.
A. Center line
B. Panel fastener pilot holes (2)
C. Pilot holes (6)
3. Mark the centerpoints for the 2 panel fastener pilot holes and
4 pilot holes need for the lower panel.
A
11W' 11V4" _ I
_28.5 cm) (28.5 cm)---_l _ ,,
2W, T__ __l --1Y2 -,___ 8V8" _'_ 8V8" .-4_1 !] _ (3 8 cm)/_
(6.3cm)__ ...........! (207cm) I(20.7cm) ; ........._ "|
............................................ zll
.............................................................:.................................... 10V2'
......................i ................B.... ..... (26.7 cm)
• I
, I
A. Center line
B. Panel fastener pilot holes (2)
C. Pilot holes (4)
4. Using a V8"drill, drill each hole 3/8"(1 cm) deep.
IMPORTANT: To avoid drilling through to the front of the
custom panel, do not drill deeper than 3/8"(1 cm).
17

1.
2.
Remove the 2 panel fasteners from the face of the inner door
of the drawer.
\\4///.,
Screw the 2 panel fasteners into the panel fastener pilot holes
of the custom panel.
Custom Decorative Panel Only
1. Remove the tape from the green ground wire on the custom
decorative panel. The end of the green ground wire is factory-
attached to the custom decorative panel.
2. Attach the ring connector end of the green ground wire on the
custom decorative panel to the ring connector and ground
screw on the dishwasher drawer intermediate panel.
(
o
A. Green ground wire
B. Ground screw
Custom Decorative Panel or Custom Wood Panel
1. Mount the custom panel to the drawer by aligning the panel
fasteners to the 2 keyhole slots and insert the panel.
Custom Decorative Panel
Custom Wood Panel
2. To secure the custom panel onto the drawer, push the custom
panel down until the top of the custom panel is flush with the
top of the control panel.
3. Using the screws provided, secure the custom panel to the
inner door by screwing through the inner door and into the Y8"
(3.2 mm) pilot holes.
18

SEGURIDAD DE LA LAVAVAJILLAS
Su seguridad y la seguridad de los demos es muy importante.
Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodomestico. Lea y obedezca siempre
todos los mensajes de seguridad.
Este es el simbolo de advertencia de seguridad.
Este simbolo le llama la atenci6n sobre peligros potenciales que pueden ocasionar la muerte o una lesi6n a
usted y a los demas.
Todos los mensajes de seguridad iran a continuaci6n del simbolo de advertencia de seguridad y de la palabra
"PELIGRO" o "ADVERTENCIA". Estas palabras significan:
Si no sigue las instrucciones de inmediato, usted puede
morir o sufrir una lesibn grave.
Si no sigue las instrucciones, usted puede morir o sufrir
una lesibn grave.
Todos los mensajes de seguridad le diran el peligro potencial, le diran c6mo reducir las posibilidades de sufrir una lesi6n y Io que
puede suceder si no se siguen las instrucciones.
INSTRUCCIONES (MPORTANTES DE SEGURIDAD
ADVERTENCIA: Cuando use la lavavajillas siga precauciones basicas, incluyendo las siguientes:
• Lea todas las instrucciones antes de usar la lavavajillas.
• Use la lavavajillas 0nicamente para las funciones que fue
dise_ada.
• Use 0nicamente detergentes o agentes de enjuague
recomendados para ser usados en las lavavajillas y
mant_ngalos fuera del alcance de los ni_os.
• AI introducir los articulos para lavar:
1) Coloque los articulos puntiagudos de manera que no
da_en el sello de la puerta
2) Introduzca los cuchillos filosos con los mangos hacia
arriba para reducir el riesgo de cortaduras.
• No lave arficulos de plastico que no Ileven la indicaci6n
"lavables en la lavavajillas" u otra similar. Lea las
recomendaciones del fabricante para los articulos de
plastico que no Ileven tal indicaci6n.
• No toque el elemento de calefacci6n durante o
inmediatamente despu6s de usar la lavavajillas.
[] No haga funcionar la lavavajillas a •enos que todos los
paneles est_n colocados debidamente en su lugar.
[] No juegue con los controles.
[] No abuse, nise siente ni se pare sobre la puerta, la tapa o
sobre las canastas de la lavavajillas.
[] Para reducir el riesgo de lesi6n, no permita que los ni_os
jueguen dentro ni sobre la lavavajillas.
[] Bajo ciertas condiciones, un sistema de agua caliente que
no ha sido usado pot dos semanas o •as puede producir
gas hidr6geno. EL GAS HIDROGENO ES EXPLOSlVO. Si
el sistema de agua caliente no ha sido usado por ese
periodo, abra todas las Ilaves de agua caliente y deje que
corra el agua por varios minutos antes de usar la
lavavajillas. Esto permitir_, que los gases acumulados
escapen. Debido a que el gas es inflamable, no fume ni
encienda ninguna llama abierta durante este tiempo.
[] Quite la puerta o la tapa del compartimiento de lavado
cuando remueva o deje de usar para siempre una vieja
lavavajillas.
GUARDE ESTAS (NSTRUCCIONES
Peligro de Vuelco
No abra el caj6n de la lavavajillas hasta que la misma est_ dentro de (a abertura del armario.
Si la lavavajillas no est_ dentro de la abertura del armario, abra lentamente el caj6n mientras
alguien sostiene la parte posterior de la lavavajillas.
No seguir estas instrucciones puede ocasionar la muerte o heridas serias.
Usted necesita:
• Abrir despacio el cajon de la lavavajillas mientras otra persona
agarra la parte posterior de la lavavajillas. Quite el material de
transporte. Cierre el cajon de la lavavajillas. Asegure el cajon
de la lavavajillas.
• Observar todos los codigos y reglamentos aplicables.
• Instalar esta lavavajillas como se especifica en estas
instrucciones.
19

Tener todo Io necesario para instalar la lavavajillas
adecuadamente. Ponerse en contacto con un instalador calificado para
asegurarse de que la lavavajillas haya sido instalada de
manera que cumpla con todos los codigos y ordenanzas
electricos y de plomeria nacionales y locales.
p
REQUISITOS DE INSTALACION
ReOna las herramientas y piezas necesarias antes de comenzar la
instalacion. Lea y siga las instrucciones provistas con cualquiera
de las herramientas enlistadas aqui.
Herramientas necesarias
• Pinzas
• Destornillador Phillips
• Destornillador de hoja plana
• Llave de tuercas o Ilave de
tubo hexagonal de ¾e" y 1¼.
• Cinta de medir o regla
• Broca de sierra perforadora
de 11/2"
Piezas suministradas
Verifique que esten todas las piezas.
Piezas necesarias
• Llave de tuercas ajustable
de 10"
• Cuchillo para uso general
• Nivel
• Taladro inalambrico
• Broca de V8"
• Destornillador de seguridad
T-20 TORX ®t(en algunos
modelos)
A. Lfnea de suministro de agua flexible de 72" (182,9 cm)
B. Atadura
C. Conectores de tamat]o apropiado para cables que se encuentren
en la lista de UL (2)
1-®TORX es una marca registrada de Acument Intellectual Properties, LLC
I
MJ
A. Protector de cables de _" que
est_ en la lista de UL/certificado
por CSA
B.Abrazadera para manguera de
1,25"
C. Tornillos para los soportes de
montaje (8)
D. Tornillos de montaje para la
unidad (4)
E. Conector de la manguera de
desag[Je
F. Soportes de montaje (4)
G. Abrazaderas tipo resorte para el
conector del desag[Je (2)
_G
H..........................
H. Tiras de adorno (2)
I. Soportes para la cubierta
protectora (2)
J. Tornillos para el soporte de la
cubierta protectora (2)
K. Adorno para la cubierta
pro tectora
L. Sujetadores para panel (en
algunos modelos) (2)
M. Tornillos TORX ®_(en algunos
modelos) (10)
N. Manguera de desag[Je
20