KitchenAid 720-0787 Product information sheet

FREESTANDING OUTDOOR GRILL
Installation Instructions and Use & Care Guide
For questions about features, operation/performance, parts, accessories or service, call: 1-877-373-2301
or visit our website at www.Kitchenaidgrills.com
ASADOR AUTÓNOMO PARA EXTERIORES
Instrucciones de instalación y Manual de uso y cuidado
Para consultas respecto a características, funcionamiento, rendimiento, piezas, accesorios o servicio técnico, llame al: 1-877-373-2301
o visite nuestro sitio de internet en www.Kitchenaidgrills.com
GRIL D'EXTÉRIEUR AUTOPORTANT
Instructions d’installation et Guide d’utilisation et d’entretien
Pour des questions à propos des caractéristiques, du fonctionnement/rendement, des pièces, des accessoires ou du service,
composer le : 1-877-373-2301
ou visiter notre site web www.Kitchenaidgrills.com
Table of Contents/Índice/Table des matières................................................................................. 2
720-0787 (LP) 730-0787(NG) 19000365A1

OUTDOOR GRILL SAFETY………………………………...3
INSTALLATION REQUIREMENTS………………………..5
Tools and Parts……………...……………………………5
Location requirements…………………………………...5
Product Dimensions……………………………………...6
Gas Supply Requirements………………………………6
Gas Connection Requirements…………………………7
PACKAGE CONTENTS LIST………………………………8
REPLACEMENT PARTS……………………………………9
INSTALLATION INSTRUCTIONS…………………..……11
Freestanding Outdoor Grill Installation……………….11
Make Gas Connection…………………………...……..16
GAS CONVERSION………………………………….........17
Tools and Parts for Gas Conversion……………….....17
Conversion from LP Gas to Natural Gas……………..18
Check and Adjust the burners…………………………21
TABLE OF CONTENTS
OUTDOOR GRILL USE………………………………………22
Using Your Outdoor Grill………………………………….22
Using Your Rotisserie Burner…………………………….24
TIPS FOR OUTDOOR GRILLING…………………………25
Cooking Methods………………………………………….25
Grilling Chart……………………………………………….26
OUT DOOR GRILL CARE……………………………………28
Replacing the Igniter Battery……………………………..28
General Cleaning………………………………………28
TROUBLE SHOOTING.......................................................30
ASISTANCE……………………………………………………30
WARRANTY…………………………………………………...31
SEGURIDAD DEL ASADOR PARA EXTERIORE…......33
REQUISITOS DE INSTALACIÓN ………………………..35
Herramientas y piezas ……………...………………….35
Requisitos de ubicación ……………………………….35
Medidas del producto …………………………………36
Requisitos del suministro de gas ………………….....36
Requisitos para la conexión de gas ………………….38
LISTA DEL CONTENIDO DEL PAQUETE ……………39
PIEZAS
DE
REPUESTO
…………………………………
40
ÍNDICE
USO DEL ASADOR PARA EXTERIORES ………………...53
Cómo usar el asador para exteriores …………………..53
Cómo usar el quemador del rostizador ………………...55
CONSEJOS PARA ASAR AL AIRE LIBRE ………………..56
Métodos de cocción ……………………………………...56
Cuadro para asar ………………………………………….57
CUIDADO DEL ASADOR PARA EXTERIORES ………….59
Cómo reemplazar la batería del encendedor ………….59
Limpieza
general
…………………………………………
.
59
2
PIEZAS
DE
REPUESTO
…………………………………
40
INSTRUCCIONES DE INSTALACIÓN …………………..42
Instalación del asador autónomo para exteriores ….42
Conexión del suministro de gas ………………………47
CONVERSIONES DE GAS ……………………………….48
Herramientas y piezas para la conversión de gas ….48
Conversión de gas LP a gas natural …………………49
Revise y regule los quemadores ……………………...52
Limpieza
general
…………………………………………
.
59
SOLUCIÓN DE PROBLEMAS............................................61
ASISTENCIA…………………………………………………..61
GARANTÍA …………………………………………………....62
SÉCURITÉ DU GRIL D'EXTÉRIEUR ……………………64
EXIGENCES D’INSTALLATION …………………………66
Outils et pièces ……………...………………………….66
Exigences d'emplacement ……………………………66
Dimensions du produit ………………………………67
Spécifications de l'alimentation en gaz ……………67
Exigences concernant le raccordement au gaz……68
CONTENU DU COLIS …………………………………69
PIÈCES DE RECHANGE ………………………………….70
INSTRUCTIONS D’INSTALLATION …………………….72
Installation du gril d’extérieur autoportant …………..72
Raccordement au gaz …………………………...…….77
CONVERSIONS POUR CHANGEMENT DE GAZ …….78
Outils et pièces pour conversion de gaz …………….78
Conversion de propane à gaz naturel ………………..79
Contrôle et réglage des brûleurs ……………………..82
TABLE DES MATIÈRES
UTILISATION DU GRIL D’EXTÉRIEUR …………………...83
Utilisation du gril d’extérieur …………………………….83
Utilisation du brûleur de tournebroche………………….85
CONSEILS POUR L'UTILISATION DU GRIL
D'EXTÉRIEUR ........................................................................86
Méthodes de cuisson …………………………………….86
Tableau de cuisson au gril ……………………………….87
ENTRETIEN DU GRIL D’EXTÉRIEUR ……………………89
Remplacement de la pile de l’allumeur ………………..89
Nettoyage général ………………………………89
DÉPANNAGE.................................................................91
ASISTANCE……………………………………………………91
GARANTIE…………………………………………………....92

OUTDOOR GRILL SAFETY
DANGER
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3.
Open lid.
WARNING
1. Do not store or use gasoline or other
flammable liquids or vapors in the vicinity
of this or any other appliance.
2. An LP cylinder not connected for use
IMPORTANT: This grill is manufactured for outdoor use only. For grills that are to be used at elevations above 2,000ft(609.6 m)
orifice conversion is required. See “ Gas Supply Requirements” section. It is the responsibility of the installer to comply with the
minimum installation clearances specified on the model/serial rating plate. The model/serial rating plate for freestanding models
can be found on the inside cabinet door.
3
3.
Open lid.
4. If odor continues, keep away from
the appliance and immediately call
your gas supplier or your fire
department
2. An LP cylinder not connected for use
shall not be stored in the vicinity of this or
any other appliance.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
In the State of Massachusetts, the following installation instructions apply:
Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or
licensed by the State of Massachusetts.
If using a ball valve, it shall be a T-handle type.
A flexible gas connector, when used, must not exceed 3 feet.

IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
Injury to persons, or damage when using the outdoor
cooking gas appliance, follow basic precautions, including
the following:
Do not install portable or built-in outdoor cooking gas
appliances in or on a recreational vehicle, portable
trailer, boat or in any other moving installation.
Always maintain minimum clearances from
combustible construction, see “ Location
Requirements” section.
The outdoor cooking gas appliance shall not be located
under overhead unprotected combustible construction.
This outdoor cooking gas appliance shall be used only
outdoors and shall not be used in a building, garage, or
any other enclosed area.
Keep any electrical supply cord and fuel supply hose
away from any heated surfaces.
Keep outdoor cooking gas appliance area clear and
free from combustible material, gasoline and other
flammable vapors and liquids.
Do not obstruct the flow of combustion and ventilation
air. Keep the ventilation openings of the cylinder
enclosure free and clear from debris.
Inspect the gas cylinder supply hose before each use
of the outdoor cooking gas appliance. If the hose
shows excessive abrasion or wear, or is cut, it MUST
be replaced before using the outdoor cooking gas
appliance. Contact your dealer and use only
The LP gas supply cylinder to be used must be:
- constructed and marked in accordance with the
Specification for LP Gas cylinders of the U.S.
Department of Transportation (DOT) or the
National Standard of Canada, CAN/CSA-b339,
Cylinders, Spheres, and Tubes for Transportation
of Dangerous Goods; and Commission.
- provided with a listed overfilling prevention device.
- provided with a cylinder connection device
compatible with the connection for outdoor cooking
gas appliances.
Always check connections for leaks each time you
connect and disconnect the LP gas supply cylinder.
See “Installation Instructions” section.
When the outdoor cooking gas appliance is not in
use, the gas must be turned off at the supply cylinder.
Storage of an outdoor cooking gas appliance indoors
is permissible only if the cylinder is disconnected
and removed from the outdoor cooking gas appliance.
Cylinders must be stored outdoors and out of the
reach of children and must not be stored in a
building, garage, or any other enclosed area.
The pressure regulator and hose assembly supplied
with the outdoor cooking gas appliance must be
used. A replacement pressure regulator and hose
assembly specific to your model is available from
your outdoor cooking gas appliance dealer.

Gas cylinder must include a collar to protect the
appliance. Contact your dealer and use only
replacement hoses specified for use with the outdoor
cooking gas appliance.
Visually check the burner flames.
They should be blue. Slight
yellow tipping is normal for
LP gas. The flames should
Be approximately 1" (2.5 cm) high.
Check and clean burner/venturi tube for insects and
insect nest. A clogged tube can lead to fire under the
outdoor cooking gas appliance.

Gas cylinder must include a collar to protect the
cylinder valve.
For appliances designed to use a CGA791
Connection: Place a dust cap on cylinder valve
outlet whenever the cylinder is not in use. Only
install the type of dust cap on the cylinder valve
outlet that is provided with the cylinder valve. Other
types of caps or plugs may result in leakage of
propane.
If the following information is not followed
exactly, a fire causing death or serious injury may occur.
Do not store a spare LP gas cylinder under or near
this outdoor cooking gas appliance.
Never fill the cylinder beyond 80 percent full.
SAVE THESE INSTRUCTIONS
4

Installation Requirements
Tools and Parts
Gather these required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Location Requirements
Parts Supplied
Gas pressure regulator/hose assembly set for 11” WCP LP
gas
Right side shelf
Left side shelf
“AA” Battery (1)
Warming rack
Cooking grid
Grease cup
Door hinges
Flame tamers
Natural gas orifice for rear burner
Parts Needed
Tools Needed
Phillips screwdriver
Wrench or pliers
Piper wrench
Scissors or cutting pliers (to
remove tiedowns)
Noncorrosive leak-detection
solution
20lb LP gas fuel tank-approximately 18”(45.7cm height) and
12”(30.5cm) diameter
Parts Needed for Conversion to Natural Gas
Natural gas conversion kit Part Number 710-0003. See
“Assistance” section to order. The conversion kit includes:
Natural gas regulator 4" W.C. (marked “Natural Gas
Regulator”)
10 ft (3.0 m) Natural gas hose with quick connector
5.9" (150 mm) Natural gas regulator hose
6 mm nut driver
6 mm wrench
Hex key
Gas line shutoff valve
1/2" male pipe thread nipple for connection to pressure
regulator.
LP gas-resistant pipe-joint compound
CSA design-certified outdoor flexible stainless steel
appliance connector (4-5 ft [1.2-1.5 m]) or rigid gas
supply line as needed.
Select a location that provides minimum exposure to wind
and traffic paths. The location should be away from strong
draft areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for grill:
A minimum of 24” (58 cm) must be maintained between
the front of the grill hood, sides and back of the grill and
any combustible construction.
A 24” (58 cm) minimum clearance must also be
maintained below the cooking surface and any
combustible construction.
5

Product Dimension Gas Supply Requirements
Observe all governing codes and ordinances.
IMPORTANT: This installation must conform with all local
codes and ordinances. In the absence of local codes,
installation must conform with either the National Fuel Gas
Code, ANSI Z223.1/NFPA54, Natural Gas and Propane
Installation Code, CSA B149.1, Propane Storage And Handling
Code, B149.2, or the Standard for Recreational Vehicles, ANSI
The model/serial number rating plate is located on the inside of
the cabinet door. See the following illustration.
A. Model/Serial number plate
Code, B149.2, or the Standard for Recreational Vehicles, ANSI
A119.2/NFPA 1192 and CSA Z240 RV Series Recreational
Vehicle Code as applicable.
IMPORTANT: Grill must be connected to a regulated gas
supply. Refer to the model/serial rating plate for information on
the type of gas that can be used. If this information does not
agree with the type of gas available, check with your local gas
supplier.
Gas Conversion:
No attempt shall be made to convert the grill from the gas
specified on the model/serial rating plate for use with a different
gas type without consulting the serving gas supplier. The
conversion kit supplied with grill must be used. See “Gas
Conversions” section for instructions.
Gas Pressure Regulator
The gas pressure regulator supplied with this grill must be used.
The inlet (supply) pressure to the regulator should be as follows
for proper operation:
LP Gas:
Operating pressure: 11" (27.9 cm) WCP
Inlet (supply) pressure: 11" to 14" (27.9 cm to 35.5 cm) WCP
Natural Gas:
Operating pressure: 4" (10.2 cm) WCP
Inlet (supply) pressure: 7" to 14" (17.8 cm to 35.5 cm) WCP
maximum.
Contact local gas supplier if you are not sure about the inlet
(supply) pressure.
A
6

Gas Connection Requirements
20 lb LP Gas Fuel Tank
This grill is equipped for use with a 20 lb LP gas fuel tank (fuel
tank not supplied). A gas pressure regulator/hose assembly is
supplied.
Any brand of 20 lb LP gas fuel tank is acceptable for use with the
grill, provided that it is compatible with the grill’s retention means
(tank tray included).
3. Place the 20 lb LP gas fuel tank bottom collar into the
mounting hole in the tank tray.
4. Tighten the tank bolt clockwise against the bottom collar of the
20 lb LP gas fuel tank to secure.
Natural Gas Conversion
Conversion must be made by a qualified gas technician. The
qualified Natural gas technician shall provide the Natural gas
supply to the selected grill location in accordance with the
National Fuel Gas Code ANSI Z223.1/NFPA 54 - latest
edition, and local codes. For conversion to Natural gas, the
Natural Gas Conversion Kit supplied with the grill (on some
A. Tank bolt
Burner Requirements for High Altitude
Input ratings shown on the model/serial rating plate are for
elevations up to 2,000 ft (609.6 m).
For elevations above 2,000 ft (609.6 m), ratings are reduced at a
rate of 4% for each 1,000 ft (304.8 m) above sea level. Orifice
conversion is required. See “Assistance” section to order.
Gas Supply Line Pressure Testing
Testing above 1/2 psi (3.5 kPa) or 14" (35.5 cm) WCP (gauge):
The grill and its individual shutoff valve must be disconnected
from the gas supply piping system during any pressure testing of
that system at test pressures greater than 1/2 psi (3.5 kPa).
Testing below 1/2 psi (3.5 kPa) or 14" (35.5 cm) WCP (gauge)
or lower:
The grill must be isolated from the gas supply piping system by
closing its individual manual shutoff valve during any pressure
testing of the gas supply piping system at test pressures equal to
or less than 1/2 psi (3.5 kPa).
A
(tank tray included).
It is also design-certified by CSA International for local LP gas
supply or for Natural gas with appropriate conversion.
The 20 lb LP gas fuel tank must be mounted and secured.
Tank hole
1. Open cabinet door.
2. Twist the tank bolt counterclockwise until it is loosened.
Natural Gas Conversion Kit supplied with the grill (on some
models) or the Natural Gas Conversion Kit Part Number
W10118098 must be used. See “Assistance” section for
information on ordering.
IMPORTANT: The gas installation must conform with local
codes, or in the absence of local codes, with the National
Fuel Gas Code, ANSI Z223.1/NFPA 54 - latest edition.
Follow instructions for converting to Natural gas in the “Gas
Conversions” section of this manual or the instructions
supplied with Natural Gas Conversion Kit Part Number 710-
0003.The gas supply line shall be equipped with an
approved shutoff valve. This valve should be located in the
same area as the grill and should be in a location that allows
ease of opening and closing. Do not block access to the
shutoff valve. The valve is for turning on or shutting off gas to
the grill.
A. Gas supply line
B. Shutoff valve “open” position
C. To grill
A. Gas pressure regulator/hose assembly
A
7

PACKAGE CONTENTS LIST
A. Firebox assembly-----1pc B. Left side panel—1pc C. Right side panel—1pc
D. Rear panel—1pc E. Door—1pc F. Gas Tank Heat Shield—1pc
G. Bottom panel—1pc H. Caster—2pcs I. Swivel Caster—1pc
J
.
Swivel
Caster
with
Brake
—
1
pc
K
.
Cart
frame,
front
—
1
pc
L
.
Door
hinge
—
2
pcs
J
.
Swivel
Caster
with
Brake
—
1
pc
K
.
Cart
frame,
front
—
1
pc
L
.
Door
hinge
—
2
pcs
M. Grease cup—1pc N. Side shelf—2pcs O. Warming rack—1pc
P. Flame Tamer—3pcs Q. Cooking grid—3pcs R. Battery—1pc
8

Replacement Parts
23 24
25
26
28
30
31 32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
39
38
36
47
48
49
50
51
52
53
54
55
56
57
58
59
60
59
9
(Natural gas conversion kit sold separately)
NG Package View
62
63
64
65
66
67
68
1
2
3
4
5
6
7
8
9
10
12
13 14
15
16
17
19
20
21
22
27
30
11
18
29
61

Part list
Part
PartPart
Part
Number
NumberNumber
Number Part
PartPart
Part（
（（
（description
descriptiondescription
description）
））
）
Warranty
WarrantyWarranty
Warranty
Coverage
CoverageCoverage
Coverage Quantity
QuantityQuantity
Quantity
Part
PartPart
Part
Number
NumberNumber
Number Part
PartPart
Part（
（（
（description
descriptiondescription
description）
））
）
Warranty
WarrantyWarranty
Warranty
Coverage
CoverageCoverage
Coverage Quantity
QuantityQuantity
Quantity
01 Swivel caster 1 1 38 Side shelf supporting bracket B 1 2
02 Swivel caster with brake 1 1 39 Side shelf 3 2
03 Caster 1 2 40 Main lid bracket seat, left 1 1
04 Tank bolt 1 1 41 Flame tamer 1 3
05 Tank bolt screw/with washer 1 1 42 Cooking grid with hole 3 3
06 Bottom panel 1 1 43 Warming rack 3 1
07 Side panel, right 1 1 44 Main lid bracket seat, right 1 1
08 Side panel, left 1 1 45 Support Bracket Screw 1 8
09 Rear panel 1 1 46 Side shelf trim panel, right 1 1
10 Cart frame, front 1 1 47 Rotisserie heat shield 1 1
11 Door hinge 1 2 48 Rotisserie burner igniter bracket 1 2
12 Gas tank heat shield 1 1 49 Rotisserie burner flex gas line 1 1
13 Door handle seat 1 2 50 Rotisserie orifice with brass elbow 1 1
14 Door handle 1 1 51 Rotisserie burner ignition wire 1 1
15 Lighting rod cover 1 1 52 Rotisserie burner 1 1
16 Lighting rod 1 1 53 Rear baffle 1 1
17 Grease box 1 1 54 Main lid handle 1 1
18 Logo 1 1 55 Main lid handle seat, right 1 1
10
19 Main control knob 1 3 56 Main lid handle seat, left 1 1
20 Main control knob bezel 1 3 57 Temperature gauge 1 1
21 Rear burner control knob 1 1 58 Temperature gauge housing 1 1
22 Rear burner control knob bezel 1 1 59 Main lid screw 1 2
23 Control panel 1 1 60 Main lid 3 1
24 Igniter module heat shield 1 1 61 Door 3 1
25 Electronic igniter module 1 1 Preassembly hardware pack
26 Igniter junction wire 1 1 NG orifice pack
27 Main gas valve 1 3 Manual
28 Rear burner gas valve 1 1 NG Package List *
NG Package List *NG Package List *
NG Package List *
29 Main manifold 1 1
Part
PartPart
Part
Number
NumberNumber
Number Description
DescriptionDescription
Description Quantity
QuantityQuantity
Quantity
30 LP regulator 1 1 62
NG regulator assembly for NG unit
(sold Separately) 1
31 Front baffle 1 1 63
NG Gas Hose with Quick
Connector assembly for NG unit
(sold Separately) 1
32 Main burner 5 3 64 6mm Nut Driver (sold Separately) 1
33 Main burner ignition wire A 1 1 65 Hex Wrench (sold Separately) 1
34 Main burner ignition wire B 1 1 66 6mm Wrench (sold Separately) 1
35 Main burner ignition wire C 1 1 67
Truss Head Screw with Lock (sold
Separately) 2
36 Side shelf supporting bracket A 1 2 68 Flat Washer (sold Separately) 2
37 Side shelf trim panel, left 1 1 *Natural gas conversion kit sold separately

INSTALLATION INSTRUCTIONS
Freestanding Outdoor Grill Installations
Hardware contents pre-installed as noted in instructions
that follow.
REF# Description QTY
1 1/4*12mm Truss Head Screw 34pcs
2 1/4*8mm Truss Head Screw 4pcs
3 5/32*10mm Countersunk Head
screw
4pcs
4 5/32*10mm Truss Head Screw 6pcs
5 1/4*10mm Support Bracket Screw 8pcs
Swivel Caster Assembly
Cart
Assembly
HI
J
1. Unpack bottom panel and 4 casters. Remove 16 screws
pre-assembled on the bottom panel and use those screws to
secure the four casters. Two casters (H) should assemble on
the line of left side, swivel caster (I) assemble on the front right
side, swivel caster with brake (J) assemble on the rear right
side as shown below.
Preparation
Before beginning assembly, make sure all parts are present.
Compare parts with package contents list and diagram above.
If any part is missing or damaged, do not attempt to assemble
the product. Contact customer service for replacements parts.
•Estimated Assembly Time: 20 minutes
•Note: The right and left sides of the grill are designated as if
you are facing the front of the grill.
1. Unpack the left side panel (B) , right side panel (C) and rear
panel (D). Loosen 8 screws which are pre-assembled on the
bottom panel and 6 pre-assembled screws on the left and
right side panels.
2. Secure the left side panel (B) by clipping the open hole
onto the screws which is pre-assembled to the bottom
panel and tighten the 3 screws.
Cart
Assembly
1 2 3 4 5
B
11

3. Secure the rear panel (D) by clipping the open hole onto the
screws which are pre-assembled the bottom panel and the left
side panel. Tighten the 3 screws to the side panel.
D
4. Secure the right side panel (C) by clipping the open hole onto
the screws which are pre-assembled to the bottom panel and rear
panel and tighten the remaining 8 screws.
C
5. Place the cart frame in position with notch facing up and to
the right. Remove the top screw and loosen the bottom screw
for the left and right side of the frame. Remove the screws on
the inside front of the side panels. Align the notches in the side
panels with the screws in the cart frame. Screw the 2 top
screws into the cart frame and the 2 screws into the inside of
the side panels that were previously removed. Tighten all 6
screws.
E
6. Remove 4 screws pre-assembled on the door (E) as shown
below.
Notch facing up
on the right side
Remove the top
screw and loosen
the bottom screw
Screw the top screw
and the screw
removed on inside
side panel.
C
12
Tighten all screws to
secure panels.

7. Attach door to cart by aligning the screw holes on the door
(E) with the screw holes in the door hinge (L). Insert the screws
into the door hinge then into the door and tighten as shown
below.
Firebox Assembly
Side Shelf Assembly
A
L
E
Note: Make sure the LP regulator hose is placed through the
gap area of the heat shield and is inside the cart when
attaching firebox assembly.
Note: Door may misalign when grill is rolled over uneven ground or
positioned on uneven ground. To adjust door alignment the hinges
need to be adjusted. Loosen the screws marked A securing the
door hinges. Hold door and hinges in desired position and tighten
screws to secure the hinges. To adjust door angle, turn screws
marked B clockwise to move door left and counterclockwise to
move door right.
1. Remove the 4 screws under the firebox (A) on each corner.
Place the firebox on the cart as shown with the hose inside the
cart and reattach the 4 screws. Tighten to secure.
1. Remove the 4 pre-assembled top screws on each corner
bracket.
A
A
B
A. Top screw
B. Bottom screw
K
F
Note: Make sure Gap on the heat shield (F) should be located on
the front right corner. Shown as above figure.
Gap
8. Loosen 2 screws which are pre-assembled on the cart frame
(K) and 2 screws pre-assembled on the heat shield (F), hang the
heat shield between the cart frame and rear panel of cart by the
screws previously loosened, and tighten screws.
13
Remove the top screw and nut
B

2. Attach the side shelf onto the bottom screws and turn the
side shelf up to horizontal position.
Spare Parts Assembly
1. Unpack the grease cup (M), 3 pieces of flame tamer (P), 3 pieces
of cooking grid (Q) and warming rack (O) accordingly.
2. Put the flame tamers (P) on the indentations in firebox.
O
Q
P
3. Insert the 4 screws removed in step 1 and tighten them.
M
14

3. Then put on the cooking grid (Q) and warming rack (O).
4. Open the cart door, and put the grease cup (M) between the
grease cup bracket as shown below.
Igniter Battery Assembly
Swivel caster with brake use
1. Unscrew igniter button cap counterclockwise to remove.
2. Place the battery in, negative end first, and screw the
igniter button cap clockwise.
Press the brake down. This places the swivel caster in the
locked position. Pull the brake up to unlock the swivel
caster so it can move.
M
15

Make Gas Connection
NOTE: If grill is to be converted to Natural gas, follow
instructions in the “Gas Conversions” section.
20 lb LP Gas Fuel Tank
LP Gas:
IMPORTANT: A 20 lb LP gas fuel tank must be purchased separately.
IMPORTANT: The gas pressure regulator/hose assembly supplied
with the grill must be used. Replacement gas pressure regulator/hose
assembly specific to your model is available from your outdoor grill
To Connect the 20 lb LP Gas Fuel Tank:
1. Check that the 20 lb LP gas fuel tank is in the “Off”
position. If not, turn the valve clockwise until it stops.
2. Check that the 20 lb LP gas fuel tank valve has the proper
type-1 external male thread connections per ANSI Z21.81.
3. Check that the burner control knobs are in the “Off”
position.
4. Remove any debris and inspect the valve connections,
port, and gas pressure regulator/hose assembly for damage.
NOTE: Always keep the LP cylinder at 90°(upright)
orientation to provide vapor withdrawal.
5. Using your hand, turn the gas pressure regulator/hose
assembly clockwise to connect to the 20 lb LP gas fuel tank
as shown.
Hand tighten only. Use of a wrench could damage the quick
coupling nut.
assembly specific to your model is available from your outdoor grill
dealer.
Tank hole
1. Open cabinet door.
2. Twist the tank bolt counterclockwise until it is loosened.
A
A. Tank bolt
3. Place the 20 lb LP gas fuel tank bottom collar into the
mounting hole in the tank tray.
4. Tighten the tank bolt clockwise against the bottom collar of the
20 lb LP gas fuel tank to secure.
A. Gas pressure regulator/hose assembly
B. 20 lb LP gas fuel tank
A
B
Make sure that the cylinder valve connection device
properly mates with the connection device attached to the
inlet of the pressure regulator.
6. Open the tank valve fully by turning the valve
counterclockwise. Wait a few minutes for gas to move
through the gas line.
7. Before lighting the grill, test all connections by brushing
on an approved noncorrosive leak-detection solution.
Bubbles will show a leak.
8. If a leak is found, turn the tank valve off and do not use
the grill. Contact a qualified gas technician to make repairs.
9. Go to “Check and Adjust the Burners” section.
16

To Disconnect the 20 lb LP Gas Fuel Tank:
1. Check that the burner control knobs are in the “Off” position
and the grill is cool.
2. Check that the 20 lb LP gas fuel tank is in the “Off” position. If
not, turn the valve clockwise until it stops.
3. Using your hand, turn the gas pressure regulator/hose
assembly counterclockwise to disconnect to the 20 lb LP gas fuel
tank as shown.
Hand loosen only. Use of a wrench could damage the quick
coupling nut.
A
.
Gas
pressure
regulator/hose
assembly
AB
GAS CONVERSION
Tools and Parts for Gas Conversion
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Tools needed
Parts supplied
Natural gas orifices
Parts needed
Natural gas conversion kit Part Number 710-0003. See
“Assistance” section to order. The conversion kit includes:
Natural gas regulator 4" W.C. (marked “Natural Gas
Regulator”)
10 ft (3.0 m) Natural gas hose with quick connector
5.9" (150 mm) Natural gas regulator hose
6 mm nut driver
6 mm wrench
Hex key
IMPORTANT: Gas conversions must be done by a qualified
installer. Before proceeding with conversion, shut off the gas supply
to the appliance prior to disconnecting the electrical power.
Phillips screwdriver
Pipe wrench
Adjustable wrench
6 mm socket and wrench
or 6 mm nut driver
Thin flat-blade screwdriver
Pliers
Pipe thread sealant
certified for LP Gas
A
.
Gas
pressure
regulator/hose
assembly
B. 20 lb LP gas fuel tank
4. Place dust cap on cylinder valve outlet whenever the cylinder is
not in use. Only install the type of dust cap on the valve outlet that
is provided with the cylinder valve. Other types of caps or plugs
may result in leakage of propane.
5. Go to “Check and Adjust the Burners” section.
17
to the appliance prior to disconnecting the electrical power.

1. A combination of pipe fittings must be used to connect the grill
to the existing gas line.
The 10 ft (3.0 m) PVC flexible gas supply hose design certified
by CSA must be used.
Pipe-joint compounds suitable for use with Natural gas
must be used. Do not use Teflon®+ tape.
There must be a certified manual shut-off valve in the gas
supply line near the grill for easy access.
2. Use a pipe wrench to connect the brass connector on one end
of the 10 ft (3.0 m) PVC flexible gas supply hose to the Natural
gas pressure regulator.
3. Connect the quick connector on the other end of the
10 ft (3.0 m) PVC flexible gas supply hose to the rigid Natural gas
supply pipe. To use the quick connect fitting; pull the head of the
quick connect back, insert the end of the PVC gas hose and
release the head of the connector. Check the connection and
make sure it is secure.
Conversion from LP Gas to Natural Gas
1. Turn off the main gas supply valve.
2. Disconnect 20 lb LP gas fuel tank (if present).
3. Turn off all burner control valves.
4. Remove the 20 lb LP gas fuel tank (if present) from the grill cart.
5. Use an adjustable wrench to remove the LP regulator from the
manifold.
Installation of the regulator
Make Gas Connection
A
D
B
6. Use an adjustable wrench to install the Natural gas
regulator hose to the manifold and secure. Attach the
Natural gas regulator to the side panel inside the grill cart
with the two screws that are pre-assembled on the
regulator. †®Teflon is a registered trademark of E.I. Du Pont De Nemours
and Company.
A. Manifold
B. Right side panel
C.10 ft. (3.0 m) PVC gas hose
D. Natural gas pressure regulator/hose assembly
C
18

Change Grill Main Burner Valve Orifices
3. Use a 6 mm socket and wrench or 6 mm nut driver to remove
the brass orifice from the end of gas valve. The main burner
orifice is located behind the LP orifice, so no additional orifice
needs to be installed.
1. Remove the grates and flame tamers.
2. Remove the 1 screw and cotter clip that hold the burner in place.
Set the screw and clip aside. Remove the burner from the grill by
lifting the burner out.
Change Grill Rotisserie Burner Orifices
1.Using a Phillips screwdriver, unscrew the 2 screws and
remove the rotisserie burner heat shield.
2. Using a Phillips screwdriver, remove the 4 screws at the back of
grill from inside the grill (2 screws on each side of the
rotisserie burner).
A
B
A. Screw
B. Cotter Clip
A. Main burner orifice
IMPORTANT: Check that the orifice is properly installed inside of the
burner opening.
4. Reinsert the burner and reattach using the screw and cotter clip
previously removed. Repeat the procedure for each main burner.
5. Position the igniters so they are 1/4" (6.0 mm) away from each
burner.
A
19

Adjust High Flame Setting Screw
3. Remove the access cover at the back of the grill hood by
removing the 4 screws (2 screws on each side of the rotisserie
burner).
4. Using a Phillips screwdriver, remove the 2 screws holding the
spider guard to the burner.
6. Take out the orifice support, and then use a 6 mm socket and
wrench or 6 mm nut driver to remove the LP orifice at the end of
the supply pipe. Replace with Natural gas orifice.
IMPORTANT: Check that the orifice is properly installed inside of
the supply pipe.
7. Reinstall the orifice support and supply pipe and tighten the nut
with a 24 mm wrench.
8. Reinstall the spider guard, access cover, and wind baffle.
When converting from LP to Natural gas, you will need to adjust
the high flame setting screw for ideal burner flame height.
1. Remove each control knob for the main burners and side burner
by loosening the setscrew with the hex key.
2. Use a flat-blade screwdriver to turn the high flame
setscrew counterclockwise approximate 90 degree.
5. Use 24 mm wrench to remove the orifice nut.
3. Check that burner operates at the new high flame setting. It
may be necessary to adjust the screw setting slightly more to
get the ideal burner flame height.
20