kitko 600mm BASE CABINET User manual

Caution: Please ensure all cabinets are screwed into your timber stud wall.
If attaching to concrete, brick, steel or other sub surfaces seek advice from
your hardware specialist. WARNING: Do not allow children to climb on this
furniture – it may topple over and badly injure a child.
Do not place toys or other child appealing items on top of this furniture.
For advice or any other questions you may have, call customer service on:
AU Customers: 1800 666 078 between 8:00am - 6:00pm E.S.T Monday to Friday
NZ Customers: 0800 522 663 between 8:00am - 6:00pm E.S.T Monday to Friday
Kickboard
clips x 2
14mm wood
screws x 6
16mm pan head
screws x 16
25mm handle
screws x 4
40mm wood
screws x 20
Plastic lugs x 18
28mm wood
screws x 4
25mm nails x 30 Stick on caps x 5Handles x 2 Door buffer x 4 Joining beads x 2
Hinges x 4 90° angle
bracket x 1
Adjustable
feet x 4
STEP 7
STEP 4 STEP 5 STEP 6
STEP 2 STEP 3
Turn the cabinet over. Mark out the dimensions shown.
Attach remaining side panel.
Nail back panel onto the side panels, base panels and fixed
shelf. Screw the back panel into the top support rail.
Screw base panel into side panel. Screw fixed shelf and support rails in position.
STEP 1
Screw the base plates for the adjustable legs in position.
Plastic Bead
Use the plastic
bead to join back
panels together.
BASE PANEL
FIXED SHELF
SUPPORT RAIL
SIDE PANEL
SIDE
PANEL
BACK PANEL
BACK PANEL
Attach legs to base plates. Set the height of the adjustable
legs to 165mm. Repeat for the remaining 3 legs.
165mm
STEP 9STEP 8
Tap the plastic lugs into the screw holes
on the cabinet and door.
25mm
68mm
32mm
89mm
side panel
front of cabinet
VER. 5 1
600mm
BASE CABINET

stud
plaster board
40mm
96mm 40mm
side panel
door
side panel
door
up/down
left/right
in/out
push to
disengage
side panel
door
side panel
door
up/down
left/right
in/out
push to
disengage
side panel
door
side panel
door
up/down
left/right
in/out
push to
disengage
Place masking tape on both sides of the door where
holes will be drilled to avoid chipping. Pre-drill using
4.5mm drill bit.
Caution: Please ensure all cabinets are screwed into your timber stud wall.
If attaching to concrete, brick, steel or other sub surfaces seek advice from
your hardware specialist. WARNING: Do not allow children to climb on this
furniture – it may topple over and badly injure a child.
Do not place toys or other child appealing items on top of this furniture.
For advice or any other questions you may have, call customer service on:
AU Customers: 1800 666 078 between 8:00am - 6:00pm E.S.T Monday to Friday
NZ Customers: 0800 522 663 between 8:00am - 6:00pm E.S.T Monday to Friday
Kickboard
clips x 2
14mm wood
screws x 6
16mm pan head
screws x 16
25mm handle
screws x 4
40mm wood
screws x 20
Plastic lugs x 18
28mm wood
screws x 4
25mm nails x 30 Stick on caps x 5Handles x 2 Door buffer x 4 Joining beads x 2
Hinges x 4 90° angle
bracket x 1
Adjustable
feet x 4
STEP 15
Caution:
Please ensure all cabinets are screwed into
your timber stud wall using a minimum of
60mm timber screws. If attaching to concrete,
brick, steel or any other substrates seek advice
from your hardware specialist.
STEP 13 STEP 14STEP 12
DOOR
STEP 11STEP 10STEP 10
DOOR
Clip the door onto the hinge plates.
To align doors adjust marked screws.
Now push down to clip hinge securely together.
Check cabinets are level then clamp together.
Pre-drill using 2mm drill bit and attach cabinets together.
VER. 5 2
600mm
BASE CABINET