8
X. Why do flashing red LEDs appear while in-use?
The adapter has lost connection to the internet because of weak network
coverage in a particular location. Reconnect by either turning off-on the
power socket switch or off-on your Wi-Fi router.
Thereafter, give it one minute for the LEDs to either turn solid blue or solid
green.
XI. Are energy readings not recorded when network connection is lost?
Not to worry. We have inserted an in-built memory into the adapter’s
circuit design. This allows the adapter to store energy readings up to 7
days with lost network connection (i.e. flashing red LEDs). When back
online, the adapter transmits these readings to our server.
XII. What is the purpose of electricity footprint?
Electricity footprint is the estimated energy costs of running an appliance
for an entire month and its contribution to a home electricity budget.
Safety instructions
The adapter is an electrical product and care should be exercised when in
use.
❖Keep the adapter away from water and fire.
❖Do not attempt to modify, disassemble or repair the adapter.
❖Do not use the adapter where wireless products are not permitted.
❖The power outlet should be easily accessible.
❖For indoor use only.
❖Do not overload power outlets. This could result in the risk of fire or
electrocution.
❖The adapter should be inserted completely into power outlets. Failure to
do so could result in excessive heat causing a fire breakout.
❖Regularly clean dust from the adapter by removing from power outlet and
wiping it down with a dry cloth. Whenever dust accumulates it may cause
an insulation defect resulting in fire.
