CDT-5800-C
With integrated whole-house audio systems
becoming more popular than ever, Klipsch
designed the CDT-5800-C to meet the
market’s demand for a high-performance in-
ceiling loudspeaker that easily challenges the
inherent limitations of fixed locations.
Thanks to a new patent-pending gimbal
mechanism, known as Controlled
Dispersion Technology™ (CDT), both the
high and low frequencies of the CDT-5800-
C can be directed towards the listening area.
Because the tweeter is independently
adjustable from the woofer, this speaker
offers even more precise localization.
The CDT-5800-C features a 1-inch titanium
tweeter mated to a swiveling 100-degree
Tractrix® Horn. This swiveling horn design
dramatically increases efficiency by enabling
the speaker to produce more output using
less energy. Additionally, a horn-loaded
tweeter works well in instances where you
want to point the sound to a specific location
because it has more controlled directivity
than a conventional dome tweeter.
The speaker’s 8-inch Cerametallic™ woofer
also has great positioning capabilities. It can
rotate a full 360 degrees and then shift 15
degrees in any direction. This flexibility
combined with the swiveling tweeter puts
you in complete control of where the sound
will go. Other professional grade features,
such as a premium network and treble and
bass contour switches, help the CDT-5800-
C establish a new benchmark in
architectural audio excellence.
8" Two-Way Pivoting In-Ceiling Loudspeaker
SPECIFICATIONS
FREQUENCY RESPONSE 49Hz-20kHz ± 3dB
SENSITIVITY 94dB @ 1 watt/1 meter
NOMINAL IMPEDANCE 8 ohms
CROSSOVER FREQUENCY 2230Hz
POWER HANDLING 50 watts (200 watts peak)
ENCLOSURE MATERIAL/TYPE ABS/ Infinite baffle, front flush with ceiling
DRIVE COMPONENTSTwo-way system using one 1" (2.5cm) titanium
dome compression tweeter with a swiveling
100° Tractrix Horn and one 8" (20.3cm)
pivoting aluminum cone woofer
WIRE GAUGE ACCOMMODATED 12
WEIGHT 7
.4 lbs. (3.4kg)
DIAMETER 1
1" (27
.9cm)
MOUNTING DEPTH 5.4" (13.7cm)
CUTOUT DIMENSIONS 9.8" (24.9cm)
INSTALLATION KIT IK-800-C (sold separately)
FIRE RATED INCLOSURE ME-800-C (sold separately)
■High sensitivity and power handling
■Swiveling Tractrix Horn compression driver tweeter
■Treble and midbass attenuation switches
■Paintable to blend with ceiling
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004
Available in a white finish, the paintable CDT-5800-C can be paired with
a Klipsch IK-800-C installation kit (sold separately). This revolutionary
kit design incorporates a mud ring, breakaway wire tie and color-
coded brackets for easy speaker size identification. It also includes
perforated metal wings that easily fasten to the studs via screws, staples
or nails. Painted white for easy marking and placement, these metal
wings can be folded around the edge of the studs if necessary.
