No. Part name Quantity Image
1Inner tent body X1
6
7Pegs X30
Step 1, Step 2,
Spread out the inner tent body. Insert the poles A & B through the
pole sleeve on the tent body.
Step 3, Step 4,
Pole A(5.05M)
2Flysheet body X1
Erect the tent with pole arch and insert the pole ends with pin
into the ring at the bottom of each tent corner. Attach the hooks
to each pole.
5
Guy rope X4
X1
B
B
3
Fibreglass pole A(5.05M) X2
X2
Fibreglass pole B(4.2M)
4
8 Person Dome Tent
Take out the fibreglass poles from bag. Assemble the poles by
each section joined together with ferrule.
Cover the inner tent with flysheet body and fix the bottom corners
with buckle on the inner tent. Move the tent to where you want to
build your campsite. Secure the pre-attached guy ropes and peg
down. The tent is complete.
( Keycode:42500735)
Pole B(4.2M)
Product Image-
Please read all instructions carefully and sure you have all parts before starting
to assemblymake
Parts list-
Assembly steps-
Upright front poles are optional and not included. Please purchase individually
Divider Curtain
