Knape&vogt Muv34 series User manual

SPECIFICATIONS

Number: Full Extension Soft Close Undermount Drawer Slide

Mounting: Side, for Frame or Frameless Construction

Height: 1-7/8"

Load Rating: 75-Pound Class

Finish: Zinc

Travel: Full Extension

Sizes: 9", 10", 12", 14", 15", 16", 18", 20", 21", 22"

Packaged: Bulk (B): 6 Sets per Carton. Includes Front Release Levers (14"+). 12 Brackets.

Bulk (B): 4 Sets per Carton. Includes Front Release Levers (9",10",12"). 8 Brackets (4 Right Hand, 4 Left Hand).

Rear Brackets: MUV-RBM Metal Rear Bracket (for use on 14",15",16",18",20",21",22" Slides)

MUV-RBP Plastic Rear Brackets (for use with 9",10",12" Slides)

Fasteners: MUV-122: #7 x 5/8"Flat Head Screw – Slide

MUV-123: #6 x 1/2"Truss Head Screw – Front Release Levers and Rear Bracket

Install Jig: MUV-121

DRAWER ASSEMBLY

DRAWER HARDWARE INSTALLATION

31/32"

[24.6mm] 29/32"

[23mm]

1/4"[6.3mm]

Variable

Drawer Bottom

DRAWER SIZING

A Max. drawer width= Length of slide + 10"for drawer fronts up to 6"tall

B For drawer fronts greater than 6", max. drawer width is 18".

Full Extension Soft Close

Undermount Drawer Slide

Material Thickness

For use with the following

material thicknesses:

3/4"[19mm]

11/16"[17.5mm]

5/8"[16mm]

Release Lever Adjustment

1/8" [3mm]

(Vertical Adjustment)

Pre-drill front holes at 15º angle.

Drawer Bottom

FACE FRAME APPLICATIONS [WITH DECORATIVE FRONT]

Cabinet Depth

Interior Depth

Slide Length Setback 5/32"[4mm]

Mount Position

3/8"[10mm]

1-7/16"[37mm]

31/32"[25mm]

Min. Top Gap

1/4"[6mm]

Max. Drawer Height=

opening minus 13/16"

[20mm]

Bottom

Recess

1/2"max.

[12.7mm]

Bottom Clearance

9/16"[14mm]

Drawer Gap

1/32"[1mm]

Interior Depth Range

Variable Setback

Face Frame Inset Application

Drawer Length

SLIDE CABINET DEPTH SLIDE LENGTH DRAWER LENGTH MAX INTERIOR DEPTH MIN INTERIOR DEPTH MAX. MATERIAL THICKNESS SETBACK

MUV34 22 24" [610mm]* 22.4" [569mm] 22" [559mm] 24-9/16" [624mm] 22-7/8" [581mm] 3/4" [19mm] 5/32" [4mm]

MUV34 21 24" [610mm] 21.4" [544mm] 21" [533mm] 23-9/16" [598mm] 21-7/8" [555mm] 3/4" [19mm] 5/32" [4mm]

MUV34 20 24" [610mm]* 20.4" [518mm] 20" [508mm] 22-9/16" [573mm] 20-7/8" [530mm] 3/4" [19mm] 5/32" [4mm]

MUV34 18 21" [533mm] 18.4" [467mm] 18" [457mm] 20-9/16" [522mm] 18-7/8" [479mm] 3/4" [19mm] 5/32" [4mm]

MUV34 16 21" [533mm]* 16.4" [417mm] 16" [406mm] 18-9/16" [472mm] 16-7/8" [429mm] 3/4" [19mm] 5/32" [4mm]

MUV34 15 18" [457mm] 15.4" [391mm] 15" [381mm] 17-9/16" [446mm] 15-7/8" [403mm] 3/4" [19mm] 5/32" [4mm]

MUV34 14 18" [457mm]* 14.4" [366mm] 14" [356mm] 16-9/16" [421mm] 14-7/8" [378mm] 3/4" [19mm] 5/32" [4mm]

MUV34 12 15" [381mm] 12.4" [315mm] 12" [305mm] 13-3/4" [349mm] 12-3/4" [324mm] 3/4" [19mm] 5/32" [4mm]

MUV34 10 12" [305mm] 10.15" [258mm] 10" [254mm] 11-3/4" [298mm] 10-3/4" [273mm] 3/4" [19mm] 5/32" [4mm]

MUV34 9 12" [305mm] 10.15" [258mm] 9" [229mm] 11-3/4" [298mm] 10-3/4" [273mm] 3/4" [19mm] 5/32" [4mm]

Setback

Drawer Front Thickness + 3/16"[5mm]

Depth Range

Min. = Slide Length + Setback + 3/16"[5mm]

Max. = Slide Length + Setback + 1-15/16"[49.2mm] Slides 14"+

Max. = Slide Length + Setback + 1-1/16"[27mm] Slides

9",10",12"

1-1/4"

[32mm]

1-5/16"

[33mm]

1/4"

[6mm]

1-7/16"

[37mm]

31/32"

[25mm]

11/32"[9mm]

TYP.

Slide Front Detail

Rear Slide Detail

11/32"

[9mm]

TYP

1-15/32"

[37.5mm]

1-7/16"

[37mm] TYP. 31/32"

[25mm] TYP. 11/32"

[9mm]

* When using rear bracket at maximum extension.

Full Extension Soft-Close Undermount Drawer Slide

Bracket:

3/16”to 1-7/8"[5mm to 48mm] Slides 14" +

3/16" to 1-1/16"[5mm to 27mm] Slides 9" to 12"

2913 R 18

Date Code

Drawer Member Side

R=Right L=Left

Slide Size

Stamping Codes:

FRAMELESS APPLICATIONS [WITH DECORATIVE FRONT]

Cabinet Depth

Interior Depth

Slide Length Setback 5/32”[4mm]

Mount Position

1-7/16”[37mm]

1-7/16”

[37mm]

31/32”

[25mm]

Min. Top Gap

1/4”[6mm]

Max. Drawer Height=

Opening minus 13/16”

[20mm]

Bottom

Recess

1/2"[12.7mm]

Bottom Clearance

9/16"[14mm]

Drawer Gap

1/32"[1mm]

Variable Setback

Interior Depth Range

Frameless Inset Application

SLIDE CABINET DEPTH MIN INTERIOR DEPTH SLIDE LENGTH DRAWER LENGTH A B C MAX. MATERIAL

THICKNESS SETBACK

MUV34 22 24" [610mm] 22-3/4" [578mm] 22.4" [569mm] 22" [559mm] 10-5/64" [256mm] 8-13/16" [224mm] 23/32" [18mm] 3/4" [19mm] 5/32" [4mm]

MUV34 21 24" [610mm] 21-3/4" [553mm] 21.4" [544mm] 21" [533mm] 10-5/64" [256mm] 8-13/16" [224mm] 23/32" [18mm] 3/4" [19mm] 5/32" [4mm]

MUV34 20 21" [533mm] 20-3/4" [527mm] 20.4" [518mm] 20" [508mm] 8-13/16" [224mm] 8-13/16" [224mm] 23/32" [18mm] 3/4" [19mm] 5/32" [4mm]

MUV34 18 21" [533mm] 18-7/8" [479mm] 18.4" [467mm] 18" [457mm] 7-9/16" [192mm] 8-13/16" [224mm] 23/32" [18mm] 3/4" [19mm] 5/32" [4mm]

MUV34 16 18" [457mm] 16-3/4" [425mm] 16.4" [417mm] 16" [406mm] 5-1/32" [128mm] 8-13/16" [224mm] 23/32" [18mm] 3/4" [19mm] 5/32" [4mm]

MUV34 15 18" [457mm] 15-7/8" [403mm] 15.4" [391mm] 15" [381mm] 7-9/16" [192mm] 5-1/32" [128mm] 23/32" [18mm] 3/4" [19mm] 5/32" [4mm]

MUV34 14 15" [381mm] 14-3/4" [375mm] 14.4" [366mm] 14" [356mm] 7-9/16" [192mm] 5-1/32" [128mm] 23/32" [18mm] 3/4" [19mm] 5/32" [4mm]

MUV34 12 15" [381mm] 12-7/8" [326mm] 12.4" [315mm] 12" [305mm] 3-25/32" [96mm] 5-1/32" [128mm] 23/32" [18mm] 3/4" [19mm] 5/32" [4mm]

MUV34 10 12" [305mm] 10-3/4" [273mm] 10.15" [258mm] 10" [254mm] 3-25/32" [96mm] 3-25/32" [96mm] 23/32" [18mm] 3/4" [19mm] 5/32" [4mm]

MUV34 9 12" [305mm] 10-3/4" [273mm] 10.15" [258mm] 9" [229mm] 3-25/32" [96mm] 3-25/32" [96mm] 23/32" [18mm] 3/4" [19mm] 5/32" [4mm]

C[see chart at bottom of page] [see chart at bottom of page]

[see chart

at bottom

of page]

Setback

Setback = Drawer Front Thickness + 3/16”[5mm]

Min. Interior Depth

Slide Length + Setback + 1/8”[3mm]

1-1/4”

[32mm]

1-5/16”

[33mm]

1/4”

[6mm]

1-7/16”

[37mm]

31/32”

[25mm]

11/32”[9mm]

TYP.

Slide Front Detail

Rear Slide Detail

11/32”

[9mm]

TYP

1-15/32”

[37.5mm]

1-7/16”

[37mm] TYP. 31/32”

[25mm] TYP. 11/32”

[9mm]

Full Extension Soft-Close Undermount Drawer Slide

KNAPE & VOGT LIMITED LIFETIME WARRANTY FOR COMMERCIAL PRODUCTS - USA

This warranty is given to the initial purchaser of new commercial products purchased from Knape & Vogt and its subsidiaries. The warranty covers defects in materials and

workmanship. The warranty does not apply to defects resulting from misuse, damage or abuse, normal wear and tear, accident, modification, improper installation or maintenance,

third party materials or damage during shipping. The warranty is not transferable and does not cover any subsequent purchasers of the products. During the Limited Lifetime Warranty

period, Knape & Vogt, will, at its option, repair or replace any defective product with a comparable product or component. This Limited Warranty is for repair or replacement of defective

products only and does not cover any other costs such as removal, installation, or other related expenses. For warranty service, please contact Knape & Vogt, 2700 Oak Industrial

Drive, Grand Rapids, MI 49505, Attention: Customer Service. Information regarding the claimed defect and date of purchase of the product must be provided. Any defective product

must be returned postage or freight prepaid to Knape & Vogt. THIS LIMITED WARRANTY CONSTITUTES THE ONLY WARRANTY FOR THE PRODUCTS AND ALL OTHER WARRANTIES OR

REPRESENTATIONS, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY DISCLAIMED. THIS LIMITED WARRANTY CONSTITUTES THE SOLE REMEDY AVAILABLE WITH REGARD TO ANY DEFECTIVE

PRODUCTS. KNAPE & VOGT SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, CONSEQUENTIAL OR SPECIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOSS OF TIME,

INCONVENIENCE, OR LOST REVENUES OR PROFITS.