Knight KG_MARM User manual

knightgroup.co.nz
Assembly Instructions
Tools Required: Phillips Screwdriver, Hex Keys (supplied)
Monitor Arm

Page 1
Assembly Instructions
knightgroup.co.nz
Monitor Arm
CAUTION: USE WITH PRODUCTS HEAVIER THAN THE
RATED WEIGHTS INDICATED MAY RESULT IN INSTABILITY
CAUSING POSSIBLE INJURY.
IMPORTANT: ENSURE THAT YOU HAVE RECEIVED ALL PARTS ACCORDING TO THE
COMPONENT CHECKLIST PRIOR TO INSTALLATION. IF ANY PARTS ARE MISSING OR
FAULTY, TELEPHONE YOUR LOCAL DISTRIBUTOR FOR A REPLACEMENT.
MAINTENANCE: CHECK THAT THE BRACKET IS SECURE AND SAFE TO USE AT REGULAR
INTERVALS (AT LEAST EVERY THREE MONTHS).
• Mounts must be attached as specified in assembly instructions. Improper installation may result in
damage or serious personal injury.
• Safety gear and proper tools must be used. This product should only be installed by professionals.
• Make sure that the supporting surface will safely support the combined weight of the equipment
and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these items
away from children.
• This product is intended for internal use only. Using this product outdoors could lead to product
failure and personal injury.
IMPORTANT NOTES!
Read the entire instruction manual before you start installation and assembly. If you
have any questions regarding any of the instructions or warnings, please contact your
local distributor for assistance.
WARNING
!

Page 2
Assembly Instructions
knightgroup.co.nz
Page 2
Assembly Instructions
Monitor Arm - Single
A (x1)
B (x1) J (x1)
H (x1) M4x1 4
M-A
(x4 ) M5x1 4 (x4)
M-B
D5 (x4)
M-C
I (x1)
C (x1)
D (x1)
E (x1)
F (x1)
G (x1)
27”
MAX 10kg
RATED
Step 1
D

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Monitor Arm - Single
Step 3a
Step 2
75-82mm
G
I
B
H

Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
Monitor Arm - Single
Step 3c
Step 3b
22-32mm
10-70mm
H
B
C
E
F
I

Page 5
Assembly Instructions
knightgroup.co.nz
Page 5
Assembly Instructions
Step 4
Monitor Arm - Single
Step 5
TV
TV
TV
H
H
M-A
M-B
M-C

Page 6
Assembly Instructions
knightgroup.co.nz
Page 6
Assembly Instructions
Step 6
Step 7
Monitor Arm - Single
360°
+30°
-3 0°
+30° -3 0°
J
J

Page 7
Assembly Instructions
knightgroup.co.nz
Page 7
Assembly Instructions
Step 1
Monitor Arm - Dual
27”
MAX 8kg x2
RATED

Page 8
Assembly Instructions
knightgroup.co.nz
Page 8
Assembly Instructions
Step 3a
Step 2
Monitor Arm - Dual

Page 9
Assembly Instructions
knightgroup.co.nz
Page 9
Assembly Instructions
Step 3c
Step 3b
Monitor Arm - Dual

Page 10
Assembly Instructions
knightgroup.co.nz
Page 10
Assembly Instructions
Step 5
Step 4
Monitor Arm - Dual

Page 11
Assembly Instructions
knightgroup.co.nz
Page 11
Assembly Instructions
Monitor Arm - Dual
Step 6
Step 7

Page 12
Assembly Instructions
knightgroup.co.nz
Page 12
Assembly Instructions
Monitor Arm - Dual
Step 8
Step 5

Page 13
Assembly Instructions
knightgroup.co.nz
Page 13
Assembly Instructions
Monitor Arm - Dual
Step 6
Step 7